Next Previous Contents

5. sppc.ct

This section describes functions from file sppc.ct.

5.1 curve

[] = curve(x,y...)
 curve(x,y) adds a curve in the current SPPC panel.
   SPPC option-value pairs can be added as further arguments.
   Do 'help sppcopts' for list of possible options.
See also: sppcmark, pseudo, panel, endpanels, sppcopts, xlabels.
   Error codes:
   1: Could not open temporary MTV file
   2: First argument (x) not a real vector
   3: Second argument (y) not a real vector
   4: First two arguments of different lengths
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value

5.2 endpanels

[] = endpanels(...)
 endpanels() finishes the current SPPC page by drawing
   the pending panels. Do 'help sppcopts' for list of valid options.
   
   Additionally, endpanels recognizes option "output". If set to non-empty string,
   it stores the SPPC code in the named file instead of calling ghostview,
   e.g.: endpanels("output","myfile.sppc").
   You can then do e.g.
     sppc -papertype 8x14cm -landscape <myfile.sppc >myfile.ps
   See sppc -help for possible options. This enables "blind" batch mode runs.
   
See also: curve, sppcmark, pseudo, panel, sppcopts, xlabels.
   Error codes:
   1: Calling endpanels before calling curve or pseudo
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value

5.3 panel

[] = panel(...)
 panel() finishes the current SPPC panel by drawing the pending
   curve and pseudo objects.
   Do 'help sppcopts' for list of valid options.
See also: curve, sppcmark, pseudo, endpanels, sppcopts, xlabels.
   Error codes:
   1: Calling panel before calling curve or pseudo
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value

5.4 pseudo

[] = pseudo(x,y,z...)
 pseudo(x,y,z) plots a pseudocolor plot in the current SPPC panel.
   SPPC option-value pairs can be added as further arguments,
   for example, pseudo(x,y,z,"interp","true) uses smooth rendering.
   Do 'help sppcopts' for list of valid options.
See also: curve, sppcmark, panel, endpanels, sppcopts, xlabels.
   Error codes:
   1: Could not open temporary MTV file
   2: First argument (x) not a real vector
   3: Second argument (y) not a real vector
   4: Third argument (z) not a real matrix
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value
   9: Third argument (z) dimensions do not match x,y lengths

5.5 sppcmark

[] = sppcmark(x,y...)
 sppcmark(x,y) sets a marker in the current SPPC panel.
   The following options can be given, in addition to those
   listed under 'help sppcopts':

   Option      Type       Explanation
   ------      ----       -----------
   label       string     Text to draw at (x,y)
   markertype  integer    0=none,1=dot,2=+,3=X,4=box,5=filled box,
                            6=diamond, 7=filled diamond, 8=triangle,
                            9=filled triangle, 10=inverted triangle,
                            11=filled inverted triangle, 12=circle,
                            13=filled circle
   markersize  real       in points (1/72 inch), default 6
   markercolor 3-vector   Color of marker and text
   endpoint_x  real       Draws a line from (x,y)
   endpoint_y  real          to (endpoint_x,endpoint_y).
                             Current linewidth, linetype, linecolor
                             are used.
   arrow       true/false Whether to draw arrowhead at line end                                                  
   
See also: curve, pseudo, panel, endpanels, sppcopts, xlabels.
   Error codes:
   1: Bad first argument x (not scalar)
   2: Bad second argument y (not scalar)
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value

5.6 sppcopts

[] = sppcopts(...)
 sppcopts([,"option",value,...]) provides a method for giving
   SPPC options without using any SPPC primitive. The following
   options can be given. These can also be, and usually are,
   attached to the plotting functions themselves (curve, pseudo, etc.).
   Options marked with (*) are global, others are reset after
   each panel:

   Option name       Type         Explanation
   ------------------------------------------
  *title             string       Overall title of page
   leftlabel         string       Left label of this panel
   rightlabel        string       Right label of this panel
   xrightlabel       string       Right label on bottom horiz axis
   xleftlabel        string       Left label on bottom horiz axis
   linetype          integer      0=none,1=solid,2=dashed,3=dotted,
                                    4=dotdashed
   linecolor         3-vector     Curve color, RGB-values in 0..1 range
   fillcolor         3-vector     Fill color (for filled curves only)
  *foreground        3-vector     Color of axes, labels etc.
  *background        3-vector     Background color of page
  *framewidth        real or int  Frame and axis line width, in 1/72-inch
   linewidth         real or int  Curve line width, in 1/72-inch
  *xmin,*xmax,ymin,               Manually given axis limits,
     ymax,zmin,zmax  real           z refers to pseudocolor scaling
   ymin_right,ymax_right real     Right vertical axis min,max
   rightcurve        true/false   This curve uses the right vertical axis.
                                    Reset after each curve.
   houraxis          true/false   This xlabels() is hours, render as hh:mm
  *houraxis_x        true/false   Horizontal axis is hour axis
  *grid              true/false   Whether to draw dotted grid lines
  *interp            true/false   If true, draws pseudocolor surfs smoothly
  *palette           3x256 matrix Color palette, Int matrix, values in 0..255
                     "default"    Rainbow palette
  *xlog              true/false   Logarithmic horizontal axis
   ylog              true/false   Logarithmic vertical axis
   zlog              true/false   Logarithmic color scaling for pseudos
  *showneg           true/false   If log scale: show <= 0 values as smallest
  *titlefontsize     real         Size of title font in 1/72-inch units
  *labelfontsize     real         Size of side label font
  *axisfontsize      real         Size of axis tickmark label font
  *annotfontsize     real         Size of marker label font
  *usebinary         true/false   Default true; if false, uses ASCII in tmpfile

   Using SPPC in batch mode: see endpanels.
  
See also: curve, sppcmark, pseudo, panel, xlabels, endpanels.
   Error codes:
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value

5.7 xlabels

[] = xlabels(x,y...)
 xlabels(x,y) puts a xlabel vector to SPPC page.
   xlabels(x,y,"houraxis","true") assumes y represents hours
   and renders the labels as hh:mm.
   Do 'help sppcopts' to see other valid options (especially
   rightlabel and leftlabel).
See also: curve, sppcmark, pseudo, endpanels, sppcopts, panel.
   Error codes:
   1: Could not open temporary MTV file
   2: First argument (x) not a real vector
   3: Second argument (y) not a real vector
   4: First two arguments of different lengths
   5: Odd number of arguments
   6: Option name not a string
   7: Unknown option
   8: Bad option value


Next Previous Contents