Menu Entries

The File Menu
N File New 	 This command starts a new document in the editing window. In the Filelist on the left the new file is named Untitled.
O File Open 	 This command does not open a file. It launches 's open file dialog box which waits for you to select the files you want to open.
The open file dialog box works like a simple version of . Use your to click on a file name to select it. Double-click on a file name to open that file. Once you've selected a file name, you can also press the OK button to open the file.
Select multiple files by holding down the or the key along with the . Left click selects one file at a time. Left click selects a contiguous set of files.
Clicking on a directory name in the file selection window opens that directory and displays its contents. Clicking on a file name shows a thumbnail view of the file in the preview window to the right of the file system window.
Use the buttons and combo box on the toolbar above the file selection window to move through the file system or to adjust the properties of the open file dialog box.
Below the file selection window is the Location combo box. Type the name of the file you want to edit here. If you click the arrow on the right of the drop down box, you can choose from recently used files. Open several files at once by quoting each file name.
Below the Location combo box is the Filter combo box. Enter file masks here to filter the kinds of files shown in the selection window. For example, typing the filter *.txt and pressing Enter will limit the display to files with a .txt extension. The Filter combo contains a list of your most recently used filters.
File Open Recent 	 This command allows you to open a file from a submenu that contains a list of recently edited files.
S File Save 	 This command saves your file. Use it often. If the file is Untitled then Save becomes Save As.
File Save As 	 Name and rename files with this command. It launches the save file dialog box. This dialog works just as the open file dialog box does. You can use it to navigate through your file system, preview existing files, or filter your file view with file masks.
Type the name you want to give the file you are saving in the Location combo box and press the OK button.
L File Save All 	 This command saves all open files.
F5 File Reload 	 Reloads the active file from disk. This command is useful if another program or process has changed the file while you have it open in
File Open with 	 This command launches the open with dialog box that allows you to select another application to open the active file. Your file will still be open in .
P File Print 	 Print the active file.
W File Close 	 Close the active file with this command. If you have made unsaved changes, you will be prompted to save the file before closes it.
File Close All 	 This command closes all the files you have open in .
File New Window 	 Opens a another instance of . The new instance will be identical to your previous instance.
Q File Quit 	 This command closes and any files you were editing. If you have made unsaved changes to any of the files you were editing, you will be prompted to save them.

The Edit Menu
The Edit menu contains a host of commands, all to work with the currently active document.

Menu Entries
Z Edit Undo 	 Undo the last editing command (typing, copying, cutting etc.)
If grouped undo is enabled, this may undo several editing commands of the same type, like typing in characters.
Z Edit Redo 	 Redo the last undo step.
X Edit Cut 	 Removes selected text if any, and places a copy of the removed text in the clipboard.
C Edit Copy 	 Copies selected text, if any, to the clipboard.
V Edit Paste 	 Copies the first item in the clipboard into the editor at cursor position.
If Overwrite Selection is enabled, the pasted text will overwrite the selection, if any.
A Edit Select All 	 Selects all text in the editor.
A Edit Deselect 	 Deselects the selected text in the editor if any.
F4 Edit Toggle Block Selection 	 Toggles Selection Mode. When the Selection Mode is BLOCK, you can make vertical selections, ie select column 5 to 10 in lines 9 to 15.
The status bar shows the current state of the Selection Mode, either NORM or BLK.
F Edit Find 	 Launch the Find Dialog to allow you to search for text in the edited document.
F3 Edit Find Next 	 Go to the nearest downwards match of the last text or regular expression searched for, starting from cursor position
F3 Edit Find Previous 	 Go to the nearest upwards match of the last text or regular expression searched for, starting from cursor position
R Edit Replace 	 Launch the Replace Dialog to replace one or more instances of a defined text with something else.
I Edit Indent 	 Adds one indent step to the current line, or all lines covered by a possible selection.
The indentation depends on the settings in the Indent Page of the Configuration Dialog.
I Edit Unindent 	 Removes one indent step from the current line, or all lines covered by a possible selection.
The indentation depends on the settings in the Indent Page of the Configuration Dialog.
# Edit Comment 	 Enclose or prepend the current line, or any selected text, with (a) comment marker(s), according to the rules defined by the syntax rules for the document. Does nothing if no comment rules are defined.
This is interesting mostly when working with source code, for example with C/C++, perl, python , as well as with markup text like HTML, , CSS and so on.
# Edit 	 Remove comment marker(s) from the current line, or a possible selection, according to the syntax rules for the document.
See also Edit Comment
G Edit Go to line... 	 Launches the Go To Line Dialog, allowing you to enter the number of a line to find in the document

The DocumentMenu
The Document menu has two purposes:
Allowing you to change the document-specific settings for the currently active document.
Choosing which of the open documents to work on
A menu entry for each open document will be available below the entries documented here. Clicking one of these will bring the requested document to focus. If you have multiple frames, an editor for that document will be displayed in the currently active frame.

Menu items
Left Document Back 	 This will bring the previous document in the stack in focus. If you have multiple frames, an editor for the document will be displayed in the currently active frame.
The order is the order in which documents were opened, rather than a logical history. This behavior may change in future versions of .
Right Document Forward 	 This will bring the previous document in the stack in focus. If you have multiple frames, an editor for the document will be displayed in the currently active frame.
The order is the order in which the documents were opened, rather than a logical history. This behavior may change in future versions of .
Document Highlight Mode 	 The Highlight Mode menu allows you to manually decide which syntax rules to use for highlighting and comment'ing the active document. The menu groups the available syntax rule sets into logical groups.
Document End of Line 	 This menu allows you to manually set the End of Line mode for the active document. Changing the mode will replace all line separators in the document with the character sequence for the new mode.
The available modes are:
Unix 	 On systems, end of line is a single newline character.
DOS 	On DOS (and ) systems, end of line is represented by a carriage return followed by a newline.
Mac 	On systems, end of line is represented by a by a carriage return.

The View menu
The View menu allows you to manage settings specific to the active editor, and to manage frames.

Menu Items
L View Split Vertical 	 This will split the frame (which may be the main editing area) in two equally sized frames, the new one to the left of the current one. The new frame gets the focus, and will display the same document as the old one.
See also Working with the MDI
T View Split Horizontal 	 Splits the current frame (which may be the main editing area) in two equally sized frames, the new one at the bottom half. The new frame gets the focus, and displays the same document as the old one.
See also Working with the MDI
R View Close Current 	 Closes the active frame. This is disabled, if there is only one frame (the main editing area).
No documents get closed by closing a frame – they will still be available in the Documents Menu as well as in the File List.
See also Working with the MDI
F6 View Show Icon Border 	 This is a toggle item. Setting it on checked will make the side of the active editor, and vice versa.
F11 View Show Line Numbers 	 This is a toggle Item. Setting it on checked will make a pane displaying the line numbers of the document visible in the left border of the active editor, and vice versa.
View Go 	
F8 Next View 	 Move focus to the next frame; the order is following order of creation rather than that of visual logic. This behavior may change in a future version of
See also Working with the MDI
F8 Previous View 	 Move focus to the previous frame; the order is following order of creation rather than that of visual logic. This behavior may change in a future version of
See also Working with the MDI

The Bookmarks Menu
The Bookmarks menu allows you to work with the bookmarks in the currently active document.
Below the entries described here, one entry for each bookmark in the active document will be available. The text will be the first few words of the marked line. Choose an item to move the cursor to the start of that line. The editor will scroll as necessary to make that line visible.

Menu Items
B Bookmarks Toggle Bookmark 	 Sets or removes a bookmark in the current line of the active document. (If it's there, it is removed, otherwise one is set.)
Bookmarks Clear Bookmarks 	 Clears (removes) all bookmarks of the active document.

The Tools Menu
The Tools menu contains commands of two categories:
Tools doing advanced editing of the current document, for example Editing Command.
Tools adding functionality to the application, for example the Find in Files tool.
M Edit Editing Command... 	 Launch the Editing Command Dialog
F Edit Find in Files... 	 Launch the Find In Files Dialog to search for a specified text in files on disk.
Edit Apply Word Wrap 	 Apply word wrap to ? according to the settings in the ?
Edit Spelling... 	 Spell check the current document using the spell checker

The Settings Menu
The Settings menu allows you to change the properties of the main window, such as showing/hiding toolbars and boxes, and provides access to the configuration dialogs.
Settings Show Toolbar 	 Toggles the display of the main toolbar.
Settings Show Filelist 	 Toggle the display of the Filelist
Settings Show Fileselector 	 Toggle the display of the File Selector
F7 Settings Show Konsole 	 Toggles the display of the built in terminal emulator.
When activated the first time, the terminal will be created.
When the terminal emulator is displayed, it will get the focus, so that you can start typing in commands immediately. If the Sync Konsole with Active Document option is enabled in the General Page of the Main configuration dialog the shell session will be cd'd to the directory of the active document, if it is a local file.
Settings Configure Shortcuts 	 Display the the familiar Keyboard Shortcut Configuration Dialog.
Settings Configure Toolbars 	 Display the the familiar Toolbar Configuration Dialog.
Settings Configure 	 Launch the Main Configuration Dialog

The Help Menu
The Help menu provides access to the online help available for ; as well as to the usual about dialogs.
As well as the standard Help menu items described below, if you have installed the kdeaddons package with additional plugins, you will have a menu entry to show the Plugins User Manuals.