1. About Debug and DebugX Debug is a clone of the MS-DOS DEBUG command. Some minor things aren't implemented. OTOH it has many features not available in the original MS DEBUG. For details see below. DebugX is an extended version of Debug, that allows to debug protected-mode (DPMI) DOS programs. 2. Files Overview The files in this distribution are: debug.com the executable binary. debugx.com a DPMI aware version of Debug. debxxvdd.dll a Win32 dll (VDD) loaded if debugx runs in a Windows XP NTVDM "DOS box". Makes debugx's L and W command work with sectors on this platform. readme.txt this file. history.txt list of changes. debug.txt a MS-Debug tutorial originally written by Michael Webster, extended to describe all additional features of Debug(X). SAMPLES contains samples of 16 and 32-bit DPMI clients in Masm syntax. The following files, which may be distributed separately, are needed if debug.com or debugx.com is to be rebuilt: debug.asm Assembler source code for both debug.com and debugx.com. Assemble with JWasm or Masm (see Make.bat). debugtbl.inc include file for debug.asm, contains tables for Debug's internal assembler and disassembler command. instr.* input data for mktables. mktables.c C program to compile the internal instruction-set tables into source file debugtbl.inc. It's supposed to be translated with Open Watcom's 16bit compiler WCC. make.bat batch file to (re)create debug.com and debugx.com. makec.bat batch file to (re)create mktables.exe. makex.bat batch file to create special versions of Debugx. Note: files mktables.c and instr.* are to be removed in one of the next versions of Debug. Then file debugtbl.inc is supposed to be modified directly if new instructions are to be supported.. 3. Added/Missing Features a. Debug extends MS-Debug in the following ways: - The assembler and disassembler support all publicly documented instructions for Intel chips through the Pentium Pro (P6), except for the MMX instructions (as for DebugX, MMX is partially supported since v1.18). The assembler and disassembler inform you if any instruction is inappropriate for the current processor. - FPU Opcodes are supported. - The current processor (for the purposes of assembler and disassembler warnings, above) can be declared to be something else via the following commands: m [x] set current processor. x=0 current processor is 8088. x=1..6 current processor is 80x86. 80586 is a Pentium and 80686 is a Pentium Pro. no argument = print current CPU/FPU types. mc [2|N] set math coprocessor. 2 = math coprocessor is a 287 (only valid if current processor is a 386). N = math coprocessor is absent no argument = math coprocessor is present - 'r register [value]' accepts 32-bit register names (for cpu 80386+). - You can do `r cx 1234' instead of having to put the `1234' on a separate line. - 'rn' displays FPU register status. Just the raw hex values of the registers are displayed, though. - 'rx' switches among 8086 and 80386 register display (for cpu 80386+). - When doing `debug < file', debug will not hang if it reaches an end of file before encountering a `q' command. - This debugger saves and restores the program's Control-C and critical error interrupts, providing for better isolation between the debugger and the program being debugged. - 'tm 0|1' sets trace command mode, 0 = process INTs (default), 1 = single-step INTs (the MS-DOS Debug compatible mode). - 'xr' allows to reallocate an EMS handle and 'xa' allows to allocate an "empty" EMS handle (with zero pages) - but only if an EMM v4.0 is present. - Besides 'i' and 'o' exist the variations 'iw', 'id', 'ow' and 'od' to read/write a WORD or DWORD value from/to a port [DWORD values require a 80386+ cpu]. - 'h' can handle dword values. - register names can be used anywhere where a number is expected as input. That is, things like "u cs:ip" do work. - 'dm' displays the DOS memory control block (MCB) chain and the current PSP. - if DOS has set its InDOS flag, Debug will avoid to use int 21h internally, which allows to single-step through DOS code. - 'd', 't' and 'u' are automatically repeated if a blank line is entered. b. DebugX has the following additional features: - besides real-mode applications it can debug both 16-bit and 32-bit DPMI clients. [To debug DPMI clients a DPMI host has to be installed. Tested with cwsdpmi, hdpmi, WinXP NTVDM, 32rtm. In DosEmu and Windows 95/98/ME DOS boxes it is required to single-step through the initial switch to protected-mode, else DebugX will loose control of the debuggee.] - 'dl': display LDT descriptor(s) (in protected-mode only) - 'di': display interrupt vector(s) - 'dx': display extended memory (read via Int 15h, ah=87h). Requires a 80386 cpu. 'dx' is automatically repeated if a blank line is entered. Be aware that Int 15h, ah=87h most likely will disable "unreal"-mode if it was enabled. This may be an unwanted side effect during debugging. - 'rn' displays FPU registers in "readable" format. - when running in a Windows XP DOS bos, DebugX will try to load and use DEBXXVDD.DLL. This DLL will allow DebugX to successfully execute its low-level disk access commands L and W in this OS - if the user has administrator rights. DEBXXVDD.DLL is public domain, the source can be downloaded from http://www.japheth.de/debxxf.html. Please be aware that you can do severe damage to your disk data if you use those low-level functions without knowing what you are doing. - 'rm' displays MMX registers. c. Optionally, one may create special-purpose versions of DebugX. Run file makex.bat to create them; you'll need the JWasm assembler for a successful run. The additional versions are: - DebugXD.COM: a version which doesn't hook int 01 and int 03. This allows to debug this version with a "normal" version of Debug(X). - DebugXE.COM: a version which hooks interrupts 06, 0Ch and 0Dh in real-mode. This is for - rare - cases when such exceptions may occur in real-mode applications. - DebugXF.COM: a version which hooks interrupt 31h in protected-mode and then rejects any attempt to modify exception vectors 01, 03, 0Dh and 0Eh. This allows to debug DOS-extended applications that modify these vectors. - DebugXG.EXE: a version that is in DOS device driver format. This variant can be used to debug other device drivers. There are a few peculiarities: commands N and Q are rejected, commands R and W can't be used to read/write files and interrupt 06 (invalid opcode exception) is hooked. - DebugXU.COM: a version that uses "unreal" mode to access extended memory for the DX command. This is useful to debug applications that set/use "unreal" mode themselves, because DebugXU will not change the current "unreal" state by its DX command. - DebugXV.COM: a version that takes care that screen output of debuggee and debugger are strictly separated - the new 'v' command is provided to watch the debuggee screen while the debugger is active. This debug version is useful to debug fullscreen text mode programs. d. The following features of MS Debug are not implemented: - Loading of .HEX files. 4. How to rebuild the Debug.COM/DebugX.COM Binaries MAKE.BAT is intended for rebuilding the debugger binaries. The recommended tool for this step is to use the JWasm assembler. Alternatively, one can use MS Masm, but then a 16-bit OMF linker will be needed as well (Open Watcom's WLink might do the job). 5. Copyright This program is copyrighted, but feel free to distribute and use it as you wish. For full copyright conditions, see the file debug.asm. Paul Vojta vojta@math.berkeley.edu