Package: nocatsplash Priority: optional Section: main Installed-Size: 240 Maintainer: root Architecture: i386 Version: 0.92-4 Depends: libc6 (>= 2.7), libglib1.2ldbl (>= 1.2.10-18) Filename: ./nocatsplash/nocatsplash_0.92-4_i386.deb Size: 31710 MD5sum: d0e64e2ce8940389a769377ca01468d8 SHA1: 959eae74910b07145b77a15ca6da728beeeeafba SHA256: 9d1ce687b6e2812c5b5f08e7fe9a33a1609764c617599e3886533c26eda9e603 Description: gateway daemon for open public network NoCatSplash is a Open Public Network Gateway Daemon. It performs as a [captive/open/active] portal. When run on a gateway/router on a network, all web requests are redirected until the client either logs in or clicks "I Accept" to an AUP. The gateway daemon then changes the firewall rules on the gateway to pass traffic for that client (based on IP address and MAC address). Package: nocatsplash Priority: optional Section: main Installed-Size: 248 Maintainer: root Architecture: amd64 Version: 0.92-4 Depends: libc6 (>= 2.7-1), libglib1.2ldbl (>= 1.2.10-18) Filename: ./nocatsplash/nocatsplash_0.92-4_amd64.deb Size: 34362 MD5sum: 5ce331d7909a8004b2cbd3d6f5ba38c5 SHA1: 8cebc3949c802b99eb030271d42050ba74b386a9 SHA256: fe7b2a7461a52f81c8c54045808ee80acc9777d69193ab2e3e42a2d01d06806d Description: gateway daemon for open public network NoCatSplash is a Open Public Network Gateway Daemon. It performs as a [captive/open/active] portal. When run on a gateway/router on a network, all web requests are redirected until the client either logs in or clicks "I Accept" to an AUP. The gateway daemon then changes the firewall rules on the gateway to pass traffic for that client (based on IP address and MAC address). Package: hostapd Priority: optional Section: net Installed-Size: 884 Maintainer: Debian/Ubuntu wpasupplicant Maintainers Architecture: i386 Version: 1:0.7.3-2 Depends: libc6 (>= 2.3), libnl1 (>= 1.1), libssl0.9.8 (>= 0.9.8m-1), lsb-base (>= 3.2-13) Filename: ./hostapd/hostapd_0.7.3-2_i386.deb Size: 352450 MD5sum: bf7fb416165c03f9eca38868178b5763 SHA1: c8ce03b3704544bacb59070000338e21f5c3e7ac SHA256: 5594fe3beb66fa63abf0fc8fd30fb7b930910b0590ee729b5550eb4530fabcd0 Description: user space IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator Originally, hostapd was an optional user space component for Host AP driver. It adds more features to the basic IEEE 802.11 management included in the kernel driver: using external RADIUS authentication server for MAC address based access control, IEEE 802.1X Authenticator and dynamic WEP keying, RADIUS accounting, WPA/WPA2 (IEEE 802.11i/RSN) Authenticator and dynamic TKIP/CCMP keying. . The current version includes support for other drivers, an integrated EAP authenticator (i.e., allow full authentication without requiring an external RADIUS authentication server), and RADIUS authentication server for EAP authentication. . hostapd works with the following drivers: . * mac80211 based drivers with support for master mode * Host AP driver for Prism2/2.5/3, * madwifi driver for cards based on Atheros chip set (ar521x), * Any wired Ethernet driver for wired IEEE 802.1X authentication. Homepage: http://w1.fi/ Package: wpasupplicant Priority: optional Section: net Installed-Size: 1200 Maintainer: Debian/Ubuntu wpasupplicant Maintainers Architecture: i386 Version: 0.7.3-4 Depends: libc6 (>= 2.3.6-6~), libdbus-1-3 (>= 1.1.1), libnl3 (>= 3.0), libpcsclite1 (>= 1.5.5), libreadline6 (>= 6.0), libssl0.9.8 (>= 0.9.8m-1), lsb-base (>= 3.0-6), adduser, initscripts (>= 2.88dsf-13.1) Suggests: wpagui, libengine-pkcs11-openssl Filename: ./wpasupplicant/wpasupplicant_0.7.3-4_i386.deb Size: 494958 MD5sum: 4c4faeb43447dc05f2f24c59fb4447a0 SHA1: 007511e87ad0029fe85c077005e562a7c968aa24 SHA256: 3809ffef4235cfac5b6e2b7d3618720de67eae133d535142dd4f0757b6a0f451 Description: client support for WPA and WPA2 (IEEE 802.11i) WPA and WPA2 are methods for securing wireless networks, the former using IEEE 802.1X, and the latter using IEEE 802.11i. This software provides key negotiation with the WPA Authenticator, and controls association with IEEE 802.11i networks. Homepage: http://w1.fi/wpa_supplicant/ Package: wpagui Priority: optional Section: net Installed-Size: 756 Maintainer: Debian/Ubuntu wpasupplicant Maintainers Architecture: i386 Source: wpasupplicant Version: 0.7.3-4 Depends: libc6 (>= 2.3.6-6~), libgcc1 (>= 1:4.1.1), libqtcore4 (>= 4:4.6.1), libqtgui4 (>= 4:4.5.3), libstdc++6 (>= 4.1.1), wpasupplicant (>= 0.7.3~), libqt4-svg Recommends: menu Filename: ./wpasupplicant/wpagui_0.7.3-4_i386.deb Size: 325168 MD5sum: f77bc1d64d23be4c2cbcb33c3841457f SHA1: df2c327a84df6a107dcae9089867c14c8c24b254 SHA256: 4bf6eb1e372f93388c2f30afc2c364a7331ae88ded60f2212a8c9aaf4270d843 Description: graphical user interface for wpa_supplicant wpagui provides a Qt interface for choosing which configured network to connect to. It also provides a method for browsing 802.11 SSID scan results, an event history log of messages generated by wpa_supplicant, and a method to add or edit wpa_supplicant networks. Homepage: http://w1.fi/wpa_supplicant/ Package: wpasupplicant-udeb Priority: standard Section: debian-installer Installed-Size: 288 Maintainer: Debian/Ubuntu wpasupplicant Maintainers Architecture: i386 Source: wpasupplicant Version: 0.7.3-4 Depends: libc6-udeb (>= 2.11), libcrypto0.9.8-udeb (>= 0.9.8m-1), libnl3-udeb (>= 3.0), busybox-udeb Filename: ./wpasupplicant/wpasupplicant-udeb_0.7.3-4_i386.udeb Size: 134622 MD5sum: 151b7dca436f39f2a9441913eb9b5769 SHA1: 569e6edbc213a24035ba17d76fa5ce4d7e6e85d5 SHA256: 6bf463419840568d14503b1f48dbbb46117b0a3b64d696e8d183e9913880d7a4 Description: Client support for WPA and WPA2 (IEEE 802.11i) WPA and WPA2 are methods for securing wireless networks, the former using IEEE 802.1X, and the latter using IEEE 802.11i. This software provides key negotiation with the WPA Authenticator, and controls association with IEEE 802.11i networks. . This is a udeb of wpasupplicant for use by the debian-installer. Package: aircrack-ng Priority: optional Section: net Installed-Size: 2684 Maintainer: Adam Cécile (Le_Vert) Architecture: i386 Version: 1:1.1-1.1 Depends: libc6 (>= 2.7-1), libsqlite3-0 (>= 3.5.9), libssl0.9.8 (>= 0.9.8f-5), zlib1g (>= 1:1.1.4), wireless-tools, iw Filename: ./aircrack-ng/aircrack-ng_1.1-1.1_i386.deb Size: 1550580 MD5sum: 1776f19107b02262b644fe1d02c9092b SHA1: 0c64546fb2c8b941bb9e5f05fb1d8b173e28bb62 SHA256: fb947a4096067b4ddebca5f0f36aad2424cd6fcaf0a0981da8a84b90c7b82541 Description: wireless WEP/WPA cracking utilities aircrack-ng is an 802.11a/b/g WEP/WPA cracking program that can recover a 40-bit, 104-bit, 256-bit or 512-bit WEP key once enough encrypted packets have been gathered. Also it can attack WPA1/2 networks with some advanced methods or simply by brute force. . It implements the standard FMS attack along with some optimizations, thus making the attack much faster compared to other WEP cracking tools. It can also fully use a multiprocessor system to its full power in order to speed up the cracking process. . aircrack-ng is a fork of aircrack, as that project has been stopped by the upstream maintainer. Homepage: http://www.aircrack-ng.org/ Package: linux-image-3.0.0-voyage Priority: optional Section: kernel Installed-Size: 32632 Maintainer: Kim-man "Punky" Tse Architecture: i386 Source: linux-source-3.0.0-voyage Version: 10.0-1 Provides: linux-image, linux-image-3.0 Depends: coreutils (>= 5.96) Pre-Depends: debconf (>= 0.2.17) | debconf-2.0 Suggests: fdutils, linux-doc-3.0.0-voyage | linux-source-3.0.0-voyage, ksymoops, linux-image-3.0.0-voyage-dbg Filename: ./linux/linux-image-3.0.0-voyage_10.0-1_i386.deb Size: 12268886 MD5sum: 8b72afc8d08e5ac5e0f4b0320df9c356 SHA1: 419d67830f6cf9397a0f5f45181031af978cc89b SHA256: 452f3255b90e62e6845c83d8be006f46eef37b9142220e791846f68b7ca3e6a9 Description: Linux kernel binary image for version 3.0.0-voyage This package contains the Linux kernel image for version 3.0.0-voyage. . It also contains the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Please look at kernel-img.conf(5), and /usr/share/doc/kernel-package/README.gz from the package kernel-package for details on how to tailor the installation of this or any other kernel image package Package: linux-source-3.0.0-voyage Priority: optional Section: devel Installed-Size: 75292 Maintainer: Kim-man "Punky" Tse Architecture: all Version: 10.0-1 Provides: linux-source, linux-source-3.0 Depends: binutils, bzip2, file Recommends: libc6-dev | libc-dev, gcc | c-compiler, make (>= 3.80-10), po-debconf, gettext, binutils (>= 2.12), util-linux (>= 2.10o), module-init-tools (>= 0.9.10), debianutils (>= 2.30) Suggests: libncurses-dev, kernel-package, xmlto, libdb3-dev, docbook-utils, e2fsprogs (>= 1.29), linux-initramfs-tool, ksymoops Filename: ./linux/linux-source-3.0.0-voyage_10.0-1_all.deb Size: 76882756 MD5sum: 8495ef73b49d47043e9829387393fe53 SHA1: 061f725022f528d78af53b86ae23f84257922101 SHA256: c4e0fc479197ae0a20544a2907b9bc9d0e45cdfc9fd58e73f3a53deac9994419 Description: Linux kernel source for version 3.0.0-voyage This package provides the source code for the Linux kernel, specifically, version 3.0.0-voyage. . You may configure the kernel to your setup by typing "make config" and following instructions, but you could get ncursesX.X-dev and try "make menuconfig" for a jazzier, and easier to use interface. There are options to use QT or GNOME based configuration interfaces, but they need additional packages to be installed. Also, please read the detailed documentation in the file README.headers.gz in the documentation directory /usr/share/doc/linux-source-3.0.0-voyage/. . If you wish to use this package to create a custom Linux kernel, then it is suggested that you investigate the package kernel-package, which has been designed to ease the task of creating kernel image packages. Package: linux-image-3.0.0-voyage Priority: optional Section: kernel Installed-Size: 42232 Maintainer: Kim-man "Punky" Tse Architecture: amd64 Source: linux-source-3.0.0-voyage Version: 10.0-1 Provides: linux-image, linux-image-3.0 Depends: coreutils (>= 5.96) Pre-Depends: debconf (>= 0.2.17) | debconf-2.0 Suggests: fdutils, linux-doc-3.0.0-voyage | linux-source-3.0.0-voyage, ksymoops, linux-image-3.0.0-voyage-dbg Filename: ./linux/linux-image-3.0.0-voyage_10.0-1_amd64.deb Size: 12873780 MD5sum: ca245727f623d83b8fc77e0711719711 SHA1: f6f1773cb8ab715115ed47060a7093792bb77b34 SHA256: 95f69bbfaa405f60d4a8eb350634698fee365ca46de427799dd6376e4553459c Description: Linux kernel binary image for version 3.0.0-voyage This package contains the Linux kernel image for version 3.0.0-voyage. . It also contains the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Please look at kernel-img.conf(5), and /usr/share/doc/kernel-package/README.gz from the package kernel-package for details on how to tailor the installation of this or any other kernel image package Package: linux-headers-3.0.0-voyage Priority: optional Section: devel Installed-Size: 48080 Maintainer: Kim-man "Punky" Tse Architecture: i386 Source: linux-source-3.0.0-voyage Version: 10.0-1 Provides: linux-headers, linux-headers-3.0 Depends: libc6 (>= 2.7) Recommends: libc6-dev | libc-dev, gcc | c-compiler, make (>= 3.80-10), binutils (>= 2.12), util-linux (>= 2.10o) Suggests: module-init-tools (>= 0.9.10), e2fsprogs (>= 1.29) Filename: ./linux/linux-headers-3.0.0-voyage_10.0-1_i386.deb Size: 6732008 MD5sum: cfb2e222f4c5a6c24ac6786ed9792419 SHA1: 2a81b2ea46c9751e795b31eb3cc574d1e716f5a3 SHA256: 3fb425ce420e467100b5d1eb074c7719d71cfb7c7ff2b8468f86af2b042b77fb Description: Header files related to Linux kernel, specifically, version 3.0.0-voyage . This package provides kernel header files for sites that want the latest kernel headers for version 3.0.0-voyage. Please read /usr/share/doc/linux-headers-3.0.0-voyage/debian.README.gz for details Package: linux-image-3.2.17-voyage Priority: optional Section: kernel Installed-Size: 46708 Maintainer: Kim-man "Punky" Tse Architecture: amd64 Source: linux-source-3.2.17-voyage Version: 11.0-1 Provides: linux-image, linux-image-3.2 Depends: coreutils (>= 5.96) Pre-Depends: debconf (>= 0.2.17) | debconf-2.0 Suggests: fdutils, linux-doc-3.2.17-voyage | linux-source-3.2.17-voyage, ksymoops, linux-image-3.2.17-voyage-dbg Filename: ./linux/linux-image-3.2.17-voyage_11.0-1_amd64.deb Size: 13991904 MD5sum: 9d9b885105230027cd6b222109012ee5 SHA1: ddf625b2c401339aba2a4e645fdd2aec204edec4 SHA256: 0456e93ac854b80604322d917993285e45e3bef702bef27c4efd67d6685431a7 Description: Linux kernel binary image for version 3.2.17-voyage This package contains the Linux kernel image for version 3.2.17-voyage. . It also contains the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Please look at kernel-img.conf(5), and /usr/share/doc/kernel-package/README.gz from the package kernel-package for details on how to tailor the installation of this or any other kernel image package Package: linux-image-3.2.17-voyage Priority: optional Section: kernel Installed-Size: 35704 Maintainer: Kim-man "Punky" Tse Architecture: i386 Source: linux-source-3.2.17-voyage Version: 11.0-1 Provides: linux-image, linux-image-3.2 Depends: coreutils (>= 5.96) Pre-Depends: debconf (>= 0.2.17) | debconf-2.0 Suggests: fdutils, linux-doc-3.2.17-voyage | linux-source-3.2.17-voyage, ksymoops, linux-image-3.2.17-voyage-dbg Filename: ./linux/linux-image-3.2.17-voyage_11.0-1_i386.deb Size: 13355250 MD5sum: 61872f32f5b5fc9fa705f32f392acb4a SHA1: 5159cd3a11a3f23b4193a03910b358b4082f47ed SHA256: 4b86f630d0bc66e27ee27fbd069085099c28b1478fbfd5d5f4024407e3ded427 Description: Linux kernel binary image for version 3.2.17-voyage This package contains the Linux kernel image for version 3.2.17-voyage. . It also contains the corresponding System.map file, and the modules built by the packager. It also contains scripts that try to ensure that the system is not left in a unbootable state after an update. . Kernel image packages are generally produced using kernel-package, and it is suggested that you install that package if you wish to create a custom kernel from the sources. Please look at kernel-img.conf(5), and /usr/share/doc/kernel-package/README.gz from the package kernel-package for details on how to tailor the installation of this or any other kernel image package Package: linux-source-3.2.17-voyage Priority: optional Section: devel Installed-Size: 75864 Maintainer: Kim-man "Punky" Tse Architecture: all Version: 11.0-1 Provides: linux-source, linux-source-3.2 Depends: binutils, bzip2, file Recommends: libc6-dev | libc-dev, gcc | c-compiler, make (>= 3.80-10), po-debconf, gettext, binutils (>= 2.12), util-linux (>= 2.10o), module-init-tools (>= 0.9.10), debianutils (>= 2.30) Suggests: libncurses-dev, kernel-package, xmlto, libdb3-dev, docbook-utils, e2fsprogs (>= 1.29), linux-initramfs-tool, ksymoops Filename: ./linux/linux-source-3.2.17-voyage_11.0-1_all.deb Size: 77464244 MD5sum: c6ee24f704c5aad3a9f7c8b1cf3f6514 SHA1: 78d57a60a8de3d16c530317a4d58aed3a930f3ed SHA256: 53e21270147651c219958fc713b4bac665a50ad1ef7abad276b0eb367d665584 Description: Linux kernel source for version 3.2.17-voyage This package provides the source code for the Linux kernel, specifically, version 3.2.17-voyage. . You may configure the kernel to your setup by typing "make config" and following instructions, but you could get ncursesX.X-dev and try "make menuconfig" for a jazzier, and easier to use interface. There are options to use QT or GNOME based configuration interfaces, but they need additional packages to be installed. Also, please read the detailed documentation in the file README.headers.gz in the documentation directory /usr/share/doc/linux-source-3.2.17-voyage/. . If you wish to use this package to create a custom Linux kernel, then it is suggested that you investigate the package kernel-package, which has been designed to ease the task of creating kernel image packages. Package: voyage-util Priority: optional Section: main Installed-Size: 280 Maintainer: Punky Tse Architecture: all Version: 0.10-1 Filename: ./voyage-util/voyage-util_0.10-1_all.deb Size: 31326 MD5sum: 62929deec5fe6136ca4c335d5f8be7d1 SHA1: fb90b895882e5e0913dad1c948061b964c6d0d79 SHA256: 92bcc8960908b7c1d51639e94468fa2cb5a8b1948b702ad0d42b19e4c4e82f6d Description: This debian package contains all useful scripts for installing and configurating voyage linix distribution. Package: voyage-util Priority: optional Section: main Installed-Size: 284 Maintainer: Punky Tse Architecture: all Version: 0.11-1 Filename: ./voyage-util/voyage-util_0.11-1_all.deb Size: 31458 MD5sum: 9aaf5513e7d56be42bfadd863ece92fa SHA1: a823242fa2406590f8b5b1b175018d2095163bce SHA256: 804c97e2657592ab01f4ac225b645ed7bc6a6ba65f9730e7281b7ece5929117a Description: This debian package contains all useful scripts for installing and configurating voyage linix distribution. Package: awds Priority: optional Section: net Installed-Size: 668 Maintainer: Georg Lukas Architecture: i386 Version: 8.12 Depends: libgea3 (>= 3.4), lsb-base (>= 3.0-6) Filename: ./awds/awds_8.12_i386.deb Size: 223960 MD5sum: cee964edcb8a3d68c3b10dcef2a6b882 SHA1: fb35715f634fe02e4f8976bf28db487352101015 SHA256: 9f59aa6d9b954ffa8c33fe53e51d2e11e40f8d5d68f3cff6ce2bf0ffa9356c39 Description: A multi-hop routing for wireless ad-hoc networks This package contains the multi-hop rounting AWDS. It creates a virtual network interface on all participating stations that are logically connected like a switched Ethernet. Thus, all high-level protocols like IPv4, IPv6, DHCP, ARP, etc. can be used without any modifications. Furthermore, the virtual interface can be bridged with other devices to integrate the virtual network in an existing infrastructure. Homepage: http://awds.berlios.de Package: awds-dev Priority: optional Section: devel Installed-Size: 6516 Maintainer: Georg Lukas Architecture: i386 Source: awds Version: 8.12 Depends: libgea3 (>= 3.0), awds (= 8.12), libiw-dev (>= 29) Filename: ./awds/awds-dev_8.12_i386.deb Size: 2030042 MD5sum: 6fbdc12acad322e357cb0a4e545217eb SHA1: dae8a5917f2921d50b7e5c3bf42fe42027f7defc SHA256: 7122ddce344123102379d8ac4b6c1e0d6af5608d6eb3a7ce543e0ba5877a9199 Description: This packages contains all header files of awds for creating extensions for the AWDS routing. Homepage: http://awds.berlios.de Package: awds-dbg Priority: optional Section: devel Installed-Size: 3940 Maintainer: Georg Lukas Architecture: i386 Source: awds Version: 8.12 Depends: libgea3 (>= 3.0), awds (= 8.12) Filename: ./awds/awds-dbg_8.12_i386.deb Size: 1328818 MD5sum: 8931eb203cd7a904d363a454803536eb SHA1: c848852c4b0f6bc3e41b8a7a778e0584483ec948 SHA256: 24ca69e4df15a95e910b58914f3795d7c7cb3b6ff50bab5d2d25e23c2d25dcff Description: This packages contains the debug symbols for the awds package. Homepage: http://awds.berlios.de Package: batmand Priority: extra Section: net Installed-Size: 208 Maintainer: Holger Levsen Architecture: i386 Version: 0.3.2-9 Depends: libc6 (>= 2.8) Recommends: batmand-gateway-dkms (>= 0.3.2-9) | batmand-gateway-modules Suggests: batmand-gateway-source Filename: ./batmand/batmand_0.3.2-9_i386.deb Size: 55774 MD5sum: 88e8b336f08ed5192886ff7dabb92321 SHA1: 753a392dd72a23480635adcfd7644eeb9214ef36 SHA256: da35d4c2e8cdf9e4065adb89367000c35baf9c878f6c13a47113c8a0179606f7 Description: better approach to mobile adhoc networking B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a new routing protocol for multi-hop ad-hoc mesh networks. . The approach of the B.A.T.M.A.N algorithm is to divide the knowledge about the best end-to-end paths between nodes in the mesh to all participating nodes. Each node perceives and maintains only the information about the best next hop towards all other nodes. Thereby the need for a global knowledge about local topology changes becomes unnecessary. Additionally, an event-based but timeless flooding mechanism prevents the accruement of contradicting topology information and limits the amount of topology messages flooding the mesh. The algorithm is designed to deal with networks that are based on unreliable links. Homepage: http://www.open-mesh.org/ Package: batmand-gateway-modules-3.0.0-voyage Priority: optional Section: kernel Installed-Size: 72 Maintainer: Holger Levsen Architecture: i386 Source: batmand (0.3.2-9) Version: 0.3.2-9+10.0-1 Provides: batmand-gateway-modules Recommends: batmand Filename: ./batmand/batmand-gateway-modules-3.0.0-voyage_0.3.2-9+10.0-1_i386.deb Size: 12400 MD5sum: 186791934b73ece060634a510cc83cfa SHA1: 65b81b5831031d096f9ddf099567c9c95055917f SHA256: 6f8ae0f6595647d70473dfa1f07cadaa2a73f4a95dc1b8d9ccee030a6218e207 Description: batmand-gateway modules for Linux (kernel 3.0.0-voyage). This package contains the set of loadable kernel modules for the B.A.T.M.A.N. Gateway It is used to reduce the load of a batmand gateway by moving all tunnel related operations from userspace to kernelland and thus minimize memory operations between them. batmand doesn't require the gateway to be loaded to provide gateway functionality. . It is part of batmand. See batmand package for more information. . This package contains the compiled kernel modules for 3.0.0-voyage . If you have compiled your own kernel, you will most likely need to build your own batmand-gateway-modules. The batmand-gateway-source package has been provided for use with the Debian's module-assistant or kernel-package utilities to produce a version of batmand-gateway-modules for your kernel. Homepage: http://www.open-mesh.org/ Package: batmand-gateway-source Priority: extra Section: kernel Installed-Size: 68 Maintainer: Holger Levsen Architecture: all Source: batmand Version: 0.3.2-9 Depends: bzip2, debhelper (>= 7), make, module-assistant, quilt Recommends: batmand Filename: ./batmand/batmand-gateway-source_0.3.2-9_all.deb Size: 25912 MD5sum: 8f3a6953b9062ea5f938af3178ea194f SHA1: bd58b022dfbd534794cf9f0cf65799e55c030c9b SHA256: 1beb6434f8f70ce5c3e3fbaeb0de605c914c119b9ff9251e8e39c68ce71491d7 Description: Source for the batmand-gateway kernel module This package provides the source code for the batmand-gateway-source kernel modules. It is used to reduce the load of a batmand gateway by moving all tunnel related operations from userspace to kernelland and thus minimize memory operations between them. batmand doesn't require the gateway to be loaded to provide gateway functionality. Kernel source or headers are required to compile these modules. . This package is part of batmand. See batmand package for more information. Homepage: http://www.open-mesh.org/ Package: batmand-gateway-dkms Priority: extra Section: kernel Installed-Size: 136 Maintainer: Holger Levsen Architecture: all Source: batmand Version: 0.3.2-9 Depends: dkms (>= 2.1.0.0) Recommends: batmand Filename: ./batmand/batmand-gateway-dkms_0.3.2-9_all.deb Size: 20076 MD5sum: 981fd0eb4b986096c16f0fc5dc3485a3 SHA1: f8e805ee1bbc24da84741bd7169361eb3ddc9c0e SHA256: 1faee35f33fbf05740f00704e0562fac8038d066e9c26f6e5b984727a6563fb9 Description: DKMS Source for the batmand-gateway kernel module This package provides the source code for the batmand-gateway-source kernel modules, packaged with approriate configuration for DKMS to build new modules dynamically. It is used to reduce the load of a batmand gateway by moving all tunnel related operations from userspace to kernelland and thus minimize memory operations between them. batmand doesn't require the gateway to be loaded to provide gateway functionality. Kernel source or headers are required to compile these modules. . This package is part of batmand. See batmand package for more information. Homepage: http://www.open-mesh.org/ Package: batmand-dbg Priority: extra Section: debug Installed-Size: 1172 Maintainer: Holger Levsen Architecture: i386 Source: batmand Version: 0.3.2-9 Depends: batmand (= 0.3.2-9) Filename: ./batmand/batmand-dbg_0.3.2-9_i386.deb Size: 380442 MD5sum: 0c54d716ca4d6b01e79e85445ce2671e SHA1: d2af5a64c9a001a30b301b197b575854a0784edb SHA256: f2133181f12910e1a9ab8271c328f4b64032c746cba894fa85ae49f523dff0d6 Description: better approach to mobile adhoc networking (debug files) B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a new routing protocol for multi-hop ad-hoc mesh networks. . This package contains the debug files. Homepage: http://www.open-mesh.org/ Package: lirc Priority: extra Section: utils Installed-Size: 2628 Maintainer: Ubuntu Core Developers Architecture: i386 Version: 0.8.7~pre3-0ubuntu2 Depends: libasound2 (>> 1.0.18), libc6 (>= 2.7), libftdi1 (>= 0.18), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, liblircclient0 (>= 0.6.4), libportaudio2, libusb-0.1-4 (>= 2:0.1.12), debconf (>= 0.5) | debconf-2.0, lsb-base, setserial Recommends: udev Suggests: lirc-modules-source, lirc-x Conflicts: makedev (<< 2.3.1-88) Filename: ./lirc/lirc_0.8.7~pre3-0ubuntu2_i386.deb Size: 623328 MD5sum: dddfbe7282eb05f43ea24c866f0c05b9 SHA1: d60d743c90168782562a95038068cafb54d88b52 SHA256: 11b69906b54317e9193e362585901e6edb3b28e23df958815d4e3ac57f5c6706 Description: infra-red remote control support LIRC stands for 'Linux Infra-red Remote Control'. . This package provides the daemons and some utilities to support infra-red remote controls under Linux. Homepage: http://lirc.org Original-Maintainer: lirc Maintainer Team Package: lirc-x Priority: extra Section: utils Installed-Size: 220 Maintainer: Ubuntu Core Developers Architecture: i386 Source: lirc Version: 0.8.7~pre3-0ubuntu2 Replaces: lirc (<< 0.6.4-8) Depends: libasound2 (>> 1.0.18), libc6 (>= 2.7), libftdi1 (>= 0.18), libice6 (>= 1:1.0.0), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, liblircclient0 (>= 0.6.4), libportaudio2, libsm6, libusb-0.1-4 (>= 2:0.1.12), libx11-6, lirc (= 0.8.7~pre3-0ubuntu2) Recommends: xfonts-75dpi Filename: ./lirc/lirc-x_0.8.7~pre3-0ubuntu2_i386.deb Size: 88392 MD5sum: d8429b2b54ae85eb22ff00c8fc27bf2e SHA1: a44e941a2838511ed0574c6957dae5649b4b2a6a SHA256: adc51c4f2953d0399a40d182ca4858aa97dce730911da2f8850981aa4345a8fa Description: infra-red remote control support - X utilities LIRC stands for 'Linux Infra-red Remote Control'. . This package provides X utilities for LIRC: irxevent: allows controlling X applications with a remote control; xmode2 : shows the IR waveform of the remote controller without an oscilloscope. Unneeded for TV cards or the Irman. Homepage: http://lirc.org Original-Maintainer: lirc Maintainer Team Package: liblircclient-dev Priority: extra Section: libdevel Installed-Size: 176 Maintainer: Ubuntu Core Developers Architecture: i386 Source: lirc Version: 0.8.7~pre3-0ubuntu2 Depends: liblircclient0 (= 0.8.7~pre3-0ubuntu2), libc6-dev Filename: ./lirc/liblircclient-dev_0.8.7~pre3-0ubuntu2_i386.deb Size: 99914 MD5sum: 11a98b7aa2036945d62cebb488c57130 SHA1: c831d35dc034893ffd85f11d174e4dfdffe04f91 SHA256: 3bede28f0306b8de4bf6340cd5a13e0b9bf709dcbff143ccaaf7ca2a87b8b866 Description: infra-red remote control support - client library development files LIRC stands for 'Linux Infra-red Remote Control'. . This package contains the static library and headers for the LIRC client library. Homepage: http://lirc.org Original-Maintainer: lirc Maintainer Team Package: liblircclient0 Priority: optional Section: libs Installed-Size: 160 Maintainer: Ubuntu Core Developers Architecture: i386 Source: lirc Version: 0.8.7~pre3-0ubuntu2 Depends: libc6 (>= 2.7) Suggests: lirc Filename: ./lirc/liblircclient0_0.8.7~pre3-0ubuntu2_i386.deb Size: 96826 MD5sum: 4ed5fae823c6f5950cb79537999774d3 SHA1: c1296376c22ac56a3f211876ae6e45819b5799f0 SHA256: 37147c324b61bf65e14cf9cfcbd6b629995585d47625b6b8890c1a4ac0352f99 Description: infra-red remote control support - client library LIRC stands for 'Linux Infra-red Remote Control'. . This package provides a library with functions to support remote controls via LIRC in programs such as xawtv. Homepage: http://lirc.org Original-Maintainer: lirc Maintainer Team Package: iw Priority: extra Section: net Installed-Size: 144 Maintainer: Debian/Ubuntu wpasupplicant Maintainers Architecture: i386 Version: 3.1-1 Replaces: aircrack-ng (<< 1:1.0~rc2-1) Depends: libc6 (>= 2.7), libnl3 (>= 3.0) Breaks: aircrack-ng (<< 1:1.0~rc2-1) Filename: ./iw/iw_3.1-1_i386.deb Size: 44868 MD5sum: 9102d28a8c54d831d1dd6cebc5673dcd SHA1: d4918a41c6db2dfcc97400e06bf835a031257d0e SHA256: 9ab1b0d6f005f388e624ddcf006fed4b48ddfd9372e7ef6e1f0315a885b5f570 Description: tool for configuring Linux wireless devices This package contains the `iw' tool which allows you to configure and show information about wireless networking. . In the future iw will become the canonical command line tool for wireless configuration and iwconfig/wireless-tools will no longer be required. See /usr/share/doc/iw/README.Debian for a more detailed overview of iw. Homepage: http://wireless.kernel.org/en/users/Documentation/iw Package: mpd Priority: optional Section: sound Installed-Size: 616 Maintainer: mpd maintainers Architecture: i386 Version: 0.16.3-1 Depends: adduser, lsb-base (>= 3.2-13), libao4 (>= 1.0.0), libasound2 (>> 1.0.18), libaudiofile0 (>= 0.2.3-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libavahi-glib1 (>= 0.6.16), libavcodec52 (>= 4:0.5.1-1) | libavcodec-extra-52 (>= 4:0.5.1-1), libavformat52 (>= 4:0.5.1-1) | libavformat-extra-52 (>= 4:0.5.1-1), libavutil49 (>= 4:0.5.1-1) | libavutil-extra-49 (>= 4:0.5.1-1), libc6 (>= 2.10), libcurl3 (>= 7.16.2-1), libfaad2, libffado2 (>= 2.0), libflac8 (>= 1.2.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.24.0), libid3tag0 (>= 0.15.1b), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libmad0 (>= 0.15.1b-3), libmikmod2 (>= 3.1.10), libmms0 (>= 0.4), libmpcdec6 (>= 1:0.1~r435), libogg0 (>= 1.1.0), libpulse0 (>= 0.9.21), libsamplerate0, libshout3, libsndfile1 (>= 1.0.20), libsqlite3-0 (>= 3.7.3), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libwavpack1 (>= 4.40.0), libwrap0 (>= 7.6-4~) Suggests: avahi-daemon, icecast2, mpd-client, pulseaudio Filename: ./mpd/mpd_0.16.3-1_i386.deb Size: 228018 MD5sum: 84826a01078c2cf1583105b2cf16ffe8 SHA1: 27984cd0b804f5f6bc7ae0a1278bb80bf9917f4d SHA256: 03ddec3cec3a024f5a93359514689cc71b9d0e07d35b4ae79dd4c0d75ed5db4b Description: Music Player Daemon Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd-dbg Priority: extra Section: debug Installed-Size: 1392 Maintainer: mpd maintainers Architecture: i386 Source: mpd Version: 0.16.3-1 Depends: mpd (= 0.16.3-1) Filename: ./mpd/mpd-dbg_0.16.3-1_i386.deb Size: 533696 MD5sum: 6f0c9b5d6bb4b02ca8397cd4abad4bd3 SHA1: 75db0eae5c9cdd8ef115f7728157953711855640 SHA256: 6344d93c51c6a627e35bf980398afa7fae59532dcd4f2247e7d10a41028f166a Description: Music Player Daemon debugging symbols Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. . This package contains the debugging symbols. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd Priority: optional Section: sound Installed-Size: 612 Maintainer: mpd maintainers Architecture: i386 Version: 0.16.4-1 Depends: adduser, lsb-base (>= 3.2-13), libao4 (>= 1.0.0), libasound2 (>> 1.0.18), libaudiofile0 (>= 0.2.3-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libavahi-glib1 (>= 0.6.16), libavcodec52 (>= 4:0.5.1-1) | libavcodec-extra-52 (>= 4:0.5.1-1), libavformat52 (>= 4:0.5.1-1) | libavformat-extra-52 (>= 4:0.5.1-1), libavutil49 (>= 4:0.5.1-1) | libavutil-extra-49 (>= 4:0.5.1-1), libc6 (>= 2.10), libcurl3-gnutls (>= 7.16.2-1), libfaad2, libffado2 (>= 2.0), libflac8 (>= 1.2.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.24.0), libid3tag0 (>= 0.15.1b), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libmad0 (>= 0.15.1b-3), libmikmod2 (>= 3.1.10), libmms0 (>= 0.4), libmpcdec6 (>= 1:0.1~r435), libogg0 (>= 1.1.0), libpulse0 (>= 0.9.21), libsamplerate0, libshout3, libsndfile1 (>= 1.0.20), libsqlite3-0 (>= 3.7.3), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libwavpack1 (>= 4.40.0) Suggests: avahi-daemon, icecast2, mpd-client, pulseaudio Filename: ./mpd/mpd_0.16.4-1_i386.deb Size: 222516 MD5sum: 9362ed680ce1d189ed05017b25377a84 SHA1: a22d7d8840afb8380fb440aa6734693504399e47 SHA256: aea348e9d63a383445b532b7be637497646f07c0907beecb7c1a970c34b09b12 Description: Music Player Daemon Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd-dbg Priority: extra Section: debug Installed-Size: 1388 Maintainer: mpd maintainers Architecture: i386 Source: mpd Version: 0.16.4-1 Depends: mpd (= 0.16.4-1) Filename: ./mpd/mpd-dbg_0.16.4-1_i386.deb Size: 525172 MD5sum: cc405915541df7c48252db9c22c6d722 SHA1: b02f6c88221c71c214b0edb214c7a677975bb119 SHA256: 2b773fe605ce29769137954e10e90eb3b3aa8d2948e1b166bd9a5d00bdfa9523 Description: Music Player Daemon debugging symbols Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. . This package contains the debugging symbols. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd Priority: optional Section: sound Installed-Size: 552 Maintainer: mpd maintainers Architecture: i386 Version: 0.16.5-1 Depends: adduser, lsb-base (>= 3.2-13), libao4 (>= 1.0.0), libasound2 (>> 1.0.18), libaudiofile0 (>= 0.2.3-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libavahi-glib1 (>= 0.6.16), libavcodec52 (>= 4:0.5.1-1) | libavcodec-extra-52 (>= 4:0.5.1-1), libavformat52 (>= 4:0.5.1-1) | libavformat-extra-52 (>= 4:0.5.1-1), libavutil49 (>= 4:0.5.1-1) | libavutil-extra-49 (>= 4:0.5.1-1), libc6 (>= 2.10), libcurl3-gnutls (>= 7.16.2-1), libfaad2, libffado2 (>= 2.0), libflac8 (>= 1.2.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.24.0), libid3tag0 (>= 0.15.1b), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libmad0 (>= 0.15.1b-3), libmikmod2 (>= 3.1.10), libmms0 (>= 0.4), libmpcdec6 (>= 1:0.1~r435), libogg0 (>= 1.1.0), libpulse0 (>= 0.9.21), libsamplerate0, libshout3, libsndfile1 (>= 1.0.20), libsqlite3-0 (>= 3.7.3), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libwavpack1 (>= 4.40.0) Suggests: avahi-daemon, icecast2, mpd-client, pulseaudio Filename: ./mpd/mpd_0.16.5-1_i386.deb Size: 200272 MD5sum: 8f59c069002dcda37fd464b2a2e18288 SHA1: 306f4f161def8c4a20c9f3be717a69776a9d3d25 SHA256: 84ac9e35881404280f175ff67f17a122d6ea8bbb8bf0bbadf8f1d8267cea7553 Description: Music Player Daemon Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd-dbg Priority: extra Section: debug Installed-Size: 1324 Maintainer: mpd maintainers Architecture: i386 Source: mpd Version: 0.16.5-1 Depends: mpd (= 0.16.5-1) Filename: ./mpd/mpd-dbg_0.16.5-1_i386.deb Size: 496036 MD5sum: 83b0327ab7c002c0a836e7f9066db123 SHA1: a22ffba266423b64e6ecb4f17d7ffb2a6baa95cc SHA256: 958ff28f0a66ce03ec20473b0ce5f7cef7d3577f45d5ef9645e972ab8a9ca4fe Description: Music Player Daemon debugging symbols Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. . This package contains the debugging symbols. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd Priority: optional Section: sound Installed-Size: 552 Maintainer: mpd maintainers Architecture: i386 Version: 0.16.7-2 Depends: adduser, lsb-base (>= 3.2-13), libao4 (>= 1.0.0), libasound2 (>> 1.0.18), libaudiofile0 (>= 0.2.3-4), libavahi-client3 (>= 0.6.16), libavahi-common3 (>= 0.6.16), libavahi-glib1 (>= 0.6.16), libavcodec53 (>= 4:0.8-2~) | libavcodec-extra-53 (>= 4:0.8-2~), libavformat53 (>= 4:0.8-2~) | libavformat-extra-53 (>= 4:0.8-2~), libavutil51 (>= 4:0.8-2~) | libavutil-extra-51 (>= 4:0.8-2~), libc6 (>= 2.10), libcurl3-gnutls (>= 7.16.2-1), libfaad2, libffado2 (>= 2.0), libflac8 (>= 1.2.1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.24.0), libid3tag0 (>= 0.15.1b), libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libmad0 (>= 0.15.1b-3), libmikmod2 (>= 3.1.10), libmms0 (>= 0.4), libmp3lame0, libmpcdec6 (>= 1:0.1~r435), libogg0 (>= 1.1.0), libpulse0 (>= 0.9.21), libsamplerate0, libshout3, libsndfile1 (>= 1.0.20), libsqlite3-0 (>= 3.7.3), libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libwavpack1 (>= 4.40.0), libwrap0 (>= 7.6-4~) Suggests: avahi-daemon, icecast2, mpd-client, pulseaudio Filename: ./mpd/mpd_0.16.7-2_i386.deb Size: 200888 MD5sum: d379637c857c5a6c078eb776cfaa1d44 SHA1: d92e1331f916f9968de754f7567868e27e9c0afd SHA256: d09151aa71c18eb14c0a17869d5c8e357154b073a3d1a416d9349c7a0fb96d91 Description: Music Player Daemon Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: mpd-dbg Priority: extra Section: debug Installed-Size: 1340 Maintainer: mpd maintainers Architecture: i386 Source: mpd Version: 0.16.7-2 Depends: mpd (= 0.16.7-2) Filename: ./mpd/mpd-dbg_0.16.7-2_i386.deb Size: 503184 MD5sum: b23ae79ed9e3fa667551ae9665bd42c3 SHA1: ae5fdccf3540df69b7ce2e80c8011544d560cd6d SHA256: e65c87be3322cd2ec425a25740d43b6d14ab2665eeebc2d855fcd597f50eeb56 Description: Music Player Daemon debugging symbols Music Player Daemon (MPD) is a server that allows remote access for playing audio files (Ogg-Vorbis, FLAC, MP3, Wave, and AIFF), streams (Ogg-Vorbis, MP3) and managing playlists. Gapless playback, buffered output, and crossfading support is also included. The design focus is on integrating a computer into a stereo system that provides control for music playback over a TCP/IP network. The goals are to be easy to install and use, to have minimal resource requirements (it has been reported to run fine on a Pentium 75), and to remain stable and flexible. . The daemon is controlled through a client which need not run on the same computer mpd runs on. The separate client and server design allows users to choose a user interface that best suites their tastes independently of the underlying daemon (this package) which actually plays music. . This package contains the debugging symbols. Homepage: http://mpd.wikia.com/wiki/Music_Player_Daemon_Wiki Package: libcue1 Priority: optional Section: libs Installed-Size: 100 Maintainer: Taylor LeMasurier-Wren Architecture: i386 Source: libcue Version: 1.3.0-1 Depends: libc6 (>= 2.7-1) Filename: ./libcue/libcue1_1.3.0-1_i386.deb Size: 21844 MD5sum: c3d6f297dcad5efa16a290260cb885ee SHA1: 8bd411e062e718f1e4b4bad4622e128c743fdc5b SHA256: 2e8c6221b3c6dd6e3cc8513a4ce9c43ca42334635333f2087c95359db650bcad Description: CUE Sheet Parser Library Libcue is intended to parse a so called cue sheet from a char string or a file pointer. For handling of the parsed data a convenient API is available. Homepage: http://sourceforge.net/projects/libcue/ Package: libcue-dev Priority: optional Section: libdevel Installed-Size: 64 Maintainer: Taylor LeMasurier-Wren Architecture: i386 Source: libcue Version: 1.3.0-1 Depends: libcue1 (= 1.3.0-1) Filename: ./libcue/libcue-dev_1.3.0-1_i386.deb Size: 3906 MD5sum: d109e9cfb100a58e30576f952ef607aa SHA1: cde9dab0c709132f16e3473b9059c5de2f170dd4 SHA256: 0979e06b44a08b79462644348783299c1c83a485a9a9e19c7939144ec0743330 Description: CUE Sheet Parser Library - development files Libcue is intended to parse a so called cue sheet from a char string or a file pointer. For handling of the parsed data a convenient API is available. . This package contains the development files Homepage: http://sourceforge.net/projects/libcue/ Package: libcue1 Priority: optional Section: libs Installed-Size: 104 Maintainer: Taylor LeMasurier-Wren Architecture: amd64 Source: libcue Version: 1.3.0-1 Depends: libc6 (>= 2.7-1) Filename: ./libcue/libcue1_1.3.0-1_amd64.deb Size: 24120 MD5sum: 25ca6448dbac252853c006e84e2d915a SHA1: 2d5dd1b6b12474e32bef3c088cc419a2e2d5a103 SHA256: b55812baf82a1889d12d740518e212c2fd144688e9cd57b0798606e2ec8e08b3 Description: CUE Sheet Parser Library Libcue is intended to parse a so called cue sheet from a char string or a file pointer. For handling of the parsed data a convenient API is available. Homepage: http://sourceforge.net/projects/libcue/ Package: libcue-dev Priority: optional Section: libdevel Installed-Size: 64 Maintainer: Taylor LeMasurier-Wren Architecture: amd64 Source: libcue Version: 1.3.0-1 Depends: libcue1 (= 1.3.0-1) Filename: ./libcue/libcue-dev_1.3.0-1_amd64.deb Size: 3920 MD5sum: 141fcb165f6c207fb13fcf1df88c6dc4 SHA1: 8cdbbcb42e9c207e952b2d44f05e6e95c7c7964c SHA256: a38072d8abad05f63082a0eea72623c220963d06c9e102af2c122560af9cf79a Description: CUE Sheet Parser Library - development files Libcue is intended to parse a so called cue sheet from a char string or a file pointer. For handling of the parsed data a convenient API is available. . This package contains the development files Homepage: http://sourceforge.net/projects/libcue/ Package: dahdi-modules-3.0.0-voyage Priority: extra Section: comm Installed-Size: 2040 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-linux (1:2.5.0+dfsg-0.9243) Version: 1:2.5.0+dfsg-0.9243+10.0-1 Replaces: zaptel-modules-3.0.0-voyage Provides: dahdi-modules Depends: linux-image-3.0.0-voyage Conflicts: zaptel-modules-3.0.0-voyage Filename: ./dahdi/dahdi-modules-3.0.0-voyage_2.5.0+dfsg-0.9243+10.0-1_i386.deb Size: 703394 MD5sum: bbf540a7b7a5a5d8e04b0e07d024a485 SHA1: 01235380d00d1e10fc1ffc2aca6d45eb5525838b SHA256: d026f18a64e0c8bd7fdfb6507018ef06169fb96d4e357fbd86926f50753d4c13 Description: DAHDI modules for Linux (kernel 3.0.0-voyage) DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package contains the set of loadable kernel modules for the DAHDI telephony API. This package contains the compiled kernel modules for 3.0.0-voyage Homepage: http://www.asterisk.org/ Package: dahdi-modules-3.2.17-voyage Priority: extra Section: comm Installed-Size: 5712 Maintainer: Debian VoIP Team Architecture: amd64 Source: dahdi-linux (1:2.6.1+dfsg-0.9653) Version: 1:2.6.1+dfsg-0.9653+11.0-1 Replaces: zaptel-modules-3.2.17-voyage Provides: dahdi-modules Depends: linux-image-3.2.17-voyage Conflicts: zaptel-modules-3.2.17-voyage Filename: ./dahdi/dahdi-modules-3.2.17-voyage_2.6.1+dfsg-0.9653+11.0-1_amd64.deb Size: 1546602 MD5sum: df1d470c82fabbfc9452a46ef074dc74 SHA1: 5d8114a69176900f4057538cb01020c501c32ada SHA256: fb33f72b04a5e4c6102ad09a85e1b0fef0e2eee17e8a815849e460874dce3c34 Description: DAHDI modules for Linux (kernel 3.2.17-voyage) DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package contains the set of loadable kernel modules for the DAHDI telephony API. This package contains the compiled kernel modules for 3.2.17-voyage Homepage: http://www.asterisk.org/ Package: dahdi-modules-3.2.17-voyage Priority: extra Section: comm Installed-Size: 3796 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-linux (1:2.6.1+dfsg-0.9653) Version: 1:2.6.1+dfsg-0.9653+11.0-1 Replaces: zaptel-modules-3.2.17-voyage Provides: dahdi-modules Depends: linux-image-3.2.17-voyage Conflicts: zaptel-modules-3.2.17-voyage Filename: ./dahdi/dahdi-modules-3.2.17-voyage_2.6.1+dfsg-0.9653+11.0-1_i386.deb Size: 1448126 MD5sum: 538abeaf8e7d7710c96f60562c4a11ec SHA1: 4e0e4fc0f292aad399a517bb804dcade854334c1 SHA256: 0d9f951c4bab7fca6e14f5d05f1aa1ec5bb6add2d339739291a21aa006804e06 Description: DAHDI modules for Linux (kernel 3.2.17-voyage) DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package contains the set of loadable kernel modules for the DAHDI telephony API. This package contains the compiled kernel modules for 3.2.17-voyage Homepage: http://www.asterisk.org/ Package: libgea3-dev Priority: optional Section: libdevel Installed-Size: 284 Maintainer: Andre Herms Architecture: i386 Source: libgea3 Version: 3.7 Depends: libgea3 (= 3.7) Conflicts: libgea2-dev Filename: ./libgea3/libgea3-dev_3.7_i386.deb Size: 39370 MD5sum: a48330ae9d9aaaf3d3f2fdc70df6107b SHA1: 95e8fe30ae02927ed2001e8644b17acbd429d503 SHA256: de641d8b207dcfe4483929b6dd9d47248df96dc3a8b18bcd4c76409d20406195 Description: GEA - an abstraction layer for developing network protocols The GEA libray provides an abstraction layer for network protocols. Functions , e.g. like sending packets, are provided and mapped to the underlying system. This is by default the POSIX-API. But other platforms can also provide an implementation. Currently such an implementation exists for the ns-2. This allow protocols developed with GEA to run on native POSIX platforms (like Linux or Unix). But the same implementation can be used in the ns-2 network simulator. By this the protocol implementation can be tested in large simulated networks. Package: libgea3 Priority: optional Section: libs Installed-Size: 120 Maintainer: Andre Herms Architecture: i386 Version: 3.7 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.2.1) Conflicts: libgea Filename: ./libgea3/libgea3_3.7_i386.deb Size: 29082 MD5sum: cbb373ac532da44a42ea0ed2a8535cf2 SHA1: 4aee88ace60483c99788ee406554cd61c9abbb2d SHA256: b52d1993df3216b3577c072578dd546daf55025f4d7fed346d2252227cac8fd9 Description: GEA - an abstraction layer for developing network protocols The GEA libray provides an abstraction layer for network protocols. Functions , e.g. like sending packets, are provided and mapped to the underlying system. This is by default the POSIX-API. But other platforms can also provide an implementation. Currently such an implementation exists for the ns-2. This allow protocols developed with GEA to run on native POSIX platforms (like Linux or Unix). But the same implementation can be used in the ns-2 network simulator. By this the protocol implementation can be tested in large simulated networks. Package: batctl Priority: extra Section: net Installed-Size: 132 Maintainer: Simon Wunderlich Architecture: i386 Version: 2011.1.0-1 Depends: libc6 (>= 2.8) Recommends: batman-adv-dkms Suggests: batman-adv-source Filename: ./batctl/batctl_2011.1.0-1_i386.deb Size: 43720 MD5sum: b964f3d53728289fb49b93de502af39a SHA1: 9ae4e5a09c06086d106b1fd8845d191b3c99bc70 SHA256: 6726a8e6a1757affb9aa9494779a2221fbcfcf5f5b8dffce946d661fd43a98fe Description: B.A.T.M.A.N. advanced control and management tool This package contains batctl, which serves as configuration utility, monitoring and debugging application. It allows one to modify the module parameters, reading the logfiles and tables, decapsulate embedded packets on the fly, traceroute to and ping mac addresses, generate sequence number graphs for the Layer 2 Mesh B.A.T.M.A.N. . B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a new routing protocol for multi-hop ad-hoc mesh networks. B.A.T.M.A.N.-advanced is the implementation of this protocol on ISO/OSI Layer 2, allowing mesh networks to be used as a virtual switch. With this approach, LANs and WANs can be easily integrated, and more protocols (like DHCP, IPv6) are supported. Homepage: http://www.open-mesh.org/ Package: batctl-dbg Priority: extra Section: debug Installed-Size: 760 Maintainer: Simon Wunderlich Architecture: i386 Source: batctl Version: 2011.1.0-1 Depends: batctl (= 2011.1.0-1) Filename: ./batctl/batctl-dbg_2011.1.0-1_i386.deb Size: 247488 MD5sum: 0a94b4283289eccf2c11e1d607e551de SHA1: ee6af862f628d9a5fca6694e16465fd751ae8848 SHA256: 5d58252fa3bc436df2a6e83425297bf775ef24d9b63204c5b4915f3ec5be83a6 Description: B.A.T.M.A.N. advanced control and management tool (debug files) batctl serves as configuration utility, monitoring and debugging application. It allows one to modify the module parameters, reading the logfiles and tables, decapsulate embedded packets on the fly, traceroute to and ping mac addresses, generate sequence number graphs for the Layer 2 Mesh B.A.T.M.A.N. . This package contains the debug files. Homepage: http://www.open-mesh.org/ Package: libopenr2-dev Priority: optional Section: libdevel Installed-Size: 208 Maintainer: Debian VoIP Team Architecture: i386 Source: openr2 Version: 1.2.0-0.7902 Depends: libopenr2-1 (= 1.2.0-0.7902) Filename: ./openr2/libopenr2-dev_1.2.0-0.7902_i386.deb Size: 52470 MD5sum: 55e8dca162bcae0e617672975f942eda SHA1: 9a7a66c960e1032076b1c8d77cd3f10bed1d067d SHA256: 60ef5ada66a03dda027ae5ed58c64732f0fa61e34c97551236c92f0fcd31cb0f Description: MFC/R2 (telephony) call setup library - Development OpenR2 is a library that implements the MFC/R2 telephony signalling over E1 lines using the DAHDI Telephony interface. . The MFC/R2 protocol is a telephony signalling protocol, widely used in Latin America, China and Africa, similar to the ISDN protocols found in most of Europe and North America . This package contains libraries and header files for developing applications. Homepage: http://www.libopenr2.org Package: libopenr2-1 Priority: optional Section: libs Installed-Size: 248 Maintainer: Debian VoIP Team Architecture: i386 Source: openr2 Version: 1.2.0-0.7902 Depends: libc6 (>= 2.7-1), dahdi Suggests: asterisk Filename: ./openr2/libopenr2-1_1.2.0-0.7902_i386.deb Size: 61046 MD5sum: 54cbe84558c1894efc04336ba9536aa3 SHA1: f4e3a7293b32fdff4e8133d1102e4ad71e8551f1 SHA256: deb283782f2e3541e4c925e6b3d89f4dea12d4e17a6b95b662496617c364bc7c Description: MFC/R2 (telephony) call setup library OpenR2 is a library that implements the MFC/R2 telephony signalling over E1 lines using the DAHDI Telephony interface. . The MFC/R2 protocol is a telephony signalling protocol, widely used in Latin America, China and Africa, similar to the ISDN protocols found in most of Europe and North America . This package contains a shared library implementing the protocol. . You may want to have a look at the Asterisk PBX for a telephony application that uses this library. Homepage: http://www.libopenr2.org Package: libopenr2-dev Priority: optional Section: libdevel Installed-Size: 212 Maintainer: Debian VoIP Team Architecture: i386 Source: openr2 Version: 1.3.2-0.9422 Depends: libopenr2-3 (= 1.3.2-0.9422) Filename: ./openr2/libopenr2-dev_1.3.2-0.9422_i386.deb Size: 56588 MD5sum: bb1af36dd6d7db68cf14a90234d6caf6 SHA1: 5efdba354d38f4193390f0adf2dc178ee2387b4e SHA256: 0e9951b57e13b844a601da400794f68c91011d5d97f6880487f10b32723d5a43 Description: MFC/R2 (telephony) call setup library - development headers OpenR2 is a library that implements the MFC/R2 telephony signalling over E1 lines using the DAHDI Telephony interface. . The MFC/R2 protocol is a telephony signalling protocol, widely used in Latin America, China and Africa, similar to the ISDN protocols found in most of Europe and North America . This package contains libraries and header files for developing applications. Homepage: http://www.libopenr2.org Package: libopenr2-bin Priority: optional Section: comm Installed-Size: 116 Maintainer: Debian VoIP Team Architecture: i386 Source: openr2 Version: 1.3.2-0.9422 Depends: libopenr2-3 (= 1.3.2-0.9422), libc6 (>= 2.7) Filename: ./openr2/libopenr2-bin_1.3.2-0.9422_i386.deb Size: 27272 MD5sum: 70d42d6687942862911a700ec67956cc SHA1: b5bc1e84a610dc9ec14fca8317dbe7e30063a8d4 SHA256: ece5d66b0c4cf4763464fd8c4e835f57cbc7aa486e8a6236eb38bd8d409661b4 Description: MFC/R2 (telephony) call setup library - test programs OpenR2 is a library that implements the MFC/R2 telephony signalling over E1 lines using the DAHDI Telephony interface. . The MFC/R2 protocol is a telephony signalling protocol, widely used in Latin America, China and Africa, similar to the ISDN protocols found in most of Europe and North America . This package contains r2test - test-driver for libopenr2. Homepage: http://www.libopenr2.org Package: libopenr2-3 Priority: optional Section: libs Installed-Size: 176 Maintainer: Debian VoIP Team Architecture: i386 Source: openr2 Version: 1.3.2-0.9422 Depends: libc6 (>= 2.7), dahdi Suggests: asterisk Filename: ./openr2/libopenr2-3_1.3.2-0.9422_i386.deb Size: 49588 MD5sum: 21aa5fbd398d825a2b860875c6f1ddb2 SHA1: 1031077716b4923f5b61cf0a211033a460cc996b SHA256: 53a9b683f914397011c5aec69fd03c926c2c21fffc20ebb56793e09646c906f3 Description: MFC/R2 (telephony) call setup library OpenR2 is a library that implements the MFC/R2 telephony signalling over E1 lines using the DAHDI Telephony interface. . The MFC/R2 protocol is a telephony signalling protocol, widely used in Latin America, China and Africa, similar to the ISDN protocols found in most of Europe and North America . This package contains a shared library implementing the protocol. . You may want to have a look at the Asterisk PBX for a telephony application that uses this library. Homepage: http://www.libopenr2.org Package: libspandsp-doc Priority: optional Section: doc Installed-Size: 14756 Maintainer: Debian VoIP Team Architecture: all Source: spandsp Version: 0.0.6~pre11-0.7148 Filename: ./spandsp/libspandsp-doc_0.0.6~pre11-0.7148_all.deb Size: 1630062 MD5sum: 29cbbbcd58c5780965af69b743254b8a SHA1: a6d298ce5a4569af0d8e918f36bebfe4bb3c68ca SHA256: 7d4feb86242cc314a51b76b437eda8f1971070c9288933d21c745862131e202c Description: Documentation for the spandsp signal processing library This package contains the online API in HTML for the libspandsp, a low level signal processing library that modulate and demodulate siignals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. Homepage: http://www.soft-switch.org/ Package: libspandsp2 Priority: optional Section: libs Installed-Size: 704 Maintainer: Debian VoIP Team Architecture: i386 Source: spandsp Version: 0.0.6~pre11-0.7148 Depends: libc6 (>= 2.7-1), libtiff4 Conflicts: asterisk-app-dtmftotext (<= 0.0.20060218-4) Filename: ./spandsp/libspandsp2_0.0.6~pre11-0.7148_i386.deb Size: 286360 MD5sum: 5990e2490d8302d036a6ae0ea6cb23b2 SHA1: 3569ae0971f0ab33b8804bd90659520adc4033b8 SHA256: 2f296524497e017e26156ef4279a522f6695f134929978dc4573bc72cc1f9fa9 Description: Telephony signal processing library This is a low-level signal processing library that modulate and demodulate signals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. . This package contains the shared library. Homepage: http://www.soft-switch.org/ Package: libspandsp-dev Priority: optional Section: libdevel Installed-Size: 1824 Maintainer: Debian VoIP Team Architecture: i386 Source: spandsp Version: 0.0.6~pre11-0.7148 Depends: libspandsp2 (= 0.0.6~pre11-0.7148), libtiff4-dev, libjpeg62-dev Filename: ./spandsp/libspandsp-dev_0.0.6~pre11-0.7148_i386.deb Size: 451338 MD5sum: 2b6a2399182b450b998ca3b7b3584ca4 SHA1: 8e16127b2f8765f21176bf501cbb66556897ae30 SHA256: 5637aee9ec89923c216057c24bda92fb850260444997469f1bfe66ddc3403fe9 Description: Telephony signal processing library This is a low-level signal processing library that modulate and demodulate signals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. . This package contains the static library and development headers. Homepage: http://www.soft-switch.org/ Package: libspandsp2 Priority: optional Section: libs Installed-Size: 752 Maintainer: Debian VoIP Team Architecture: i386 Source: spandsp Version: 0.0.6~pre20-0.9676 Depends: libc6 (>= 2.3), libtiff4 Filename: ./spandsp/libspandsp2_0.0.6~pre20-0.9676_i386.deb Size: 299862 MD5sum: 8e620ac26270dfbfb6921abcad566fb1 SHA1: f5d9642835f352ceda8bc7d7c034ae1bc241e9b2 SHA256: 5218cb81855b6a50b0bb64b5d8ff74a2ebddeed01e1d71e31ed9b86316ac6074 Description: Telephony signal processing library This is a low-level signal processing library that modulate and demodulate signals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. . This package contains the shared library. Homepage: http://www.soft-switch.org/ Package: libspandsp-dev Priority: optional Section: libdevel Installed-Size: 1984 Maintainer: Debian VoIP Team Architecture: i386 Source: spandsp Version: 0.0.6~pre20-0.9676 Depends: libspandsp2 (= 0.0.6~pre20-0.9676), libtiff-dev | libtiff4-dev, libjpeg-dev | libjpeg62-dev Filename: ./spandsp/libspandsp-dev_0.0.6~pre20-0.9676_i386.deb Size: 487832 MD5sum: b410c0c7d2590b66ccdf25cc4d794a4b SHA1: 696c20451166f3467634260f1fa52bf612d22e20 SHA256: 3a72d2ab834c5a68447571e05711e45b4d3934cae5da4c6d95080cb965a9fbbd Description: Telephony signal processing library - development headers This is a low-level signal processing library that modulate and demodulate signals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. . This package contains the static library and development headers. Homepage: http://www.soft-switch.org/ Package: libspandsp-doc Priority: optional Section: doc Installed-Size: 16348 Maintainer: Debian VoIP Team Architecture: all Source: spandsp Version: 0.0.6~pre20-0.9676 Depends: libjs-jquery Filename: ./spandsp/libspandsp-doc_0.0.6~pre20-0.9676_all.deb Size: 2085350 MD5sum: 670f154a108cc77e6811a7168835be7a SHA1: f5ad49bdf246ffc44d938e4ae0a7eeafe020f17f SHA256: f60eebc66811403c15b0515eba889939842104c8adc8f620e1cc535e14a27f4e Description: Documentation for the spandsp signal processing library This package contains the online API in HTML for the libspandsp, a low level signal processing library that modulate and demodulate siignals commonly used in telephony, such as the "noise" generated by a fax modem or DTMF touchpad. Homepage: http://www.soft-switch.org/ Package: libss7-dev Priority: optional Section: libdevel Installed-Size: 192 Maintainer: Debian VoIP Team Architecture: i386 Source: libss7 Version: 1.0.2-1 Depends: libss7-1 (= 1.0.2-1) Filename: ./libss7/libss7-dev_1.0.2-1_i386.deb Size: 57606 MD5sum: 97bb2567524877457aec4964b940bec0 SHA1: a32933738a284e54344bf1d608bfc21865923e56 SHA256: 0900f628a30497fc6ec7a9e99ee8790fd4f2fc10c98ae089c86e6585e2c4ee2b Description: Signalling System 7 (ss7) development files Development files for the C implementation of the Signalling System 7 (ss7) telephony protocol. Homepage: http://www.asterisk.org/ Package: libss7-1 Priority: optional Section: libs Installed-Size: 132 Maintainer: Debian VoIP Team Architecture: i386 Source: libss7 Version: 1.0.2-1 Depends: libc6 (>= 2.7-1) Filename: ./libss7/libss7-1_1.0.2-1_i386.deb Size: 36622 MD5sum: abeff51fe90ffd7223c248f1133697cd SHA1: 42f5711f0e0986574cfa1a296c94c2896f9362de SHA256: 3f838b1c037c2240a92a5d430bb10c498d5f19929593031ef38a164331ed7710 Description: Signalling System 7 (ss7) library C implementation of the Signalling System 7 (ss7) telephony protocol. Homepage: http://www.asterisk.org/ Package: libss7-dbg Priority: extra Section: libdevel Installed-Size: 156 Maintainer: Debian VoIP Team Architecture: i386 Source: libss7 Version: 1.0.2-1 Depends: libss7-1 (= 1.0.2-1) Filename: ./libss7/libss7-dbg_1.0.2-1_i386.deb Size: 46062 MD5sum: db29b39c6c2ae39c23136c2d17ee3693 SHA1: 270a5625f818d15ceb43a45775da350bc359abd4 SHA256: 9e688da356a5af3c50fe27ea577c880b00033c88574234d63fd0e35173eb4b7d Description: Signalling System 7 (ss7) debugging symbols Debug symbols for the C implementation of the Signalling System 7 (ss7) telephony protocol. Homepage: http://www.asterisk.org/ Package: libpri-dev Priority: optional Section: libdevel Installed-Size: 292 Maintainer: Debian VoIP Team Architecture: i386 Source: libpri Version: 1.4.10.2-1.7864 Depends: libpri1.4 (= 1.4.10.2-1.7864) Filename: ./libpri/libpri-dev_1.4.10.2-1.7864_i386.deb Size: 96192 MD5sum: 8b298562209663af4548b99ba0c31d87 SHA1: c9e318f53d7473e6e0a12c267084d3ccf4b39708 SHA256: 78f3757ba277484060816764e0cd8ba16471c4d92619c38d00e1835822fe7972 Description: Primary Rate ISDN specification development files Development files for the C implementation of the Primary Rate ISDN specification. . It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent. Homepage: http://www.asterisk.org/ Package: libpri1.4 Priority: optional Section: libs Installed-Size: 216 Maintainer: Debian VoIP Team Architecture: i386 Source: libpri Version: 1.4.10.2-1.7864 Depends: libc6 (>= 2.7-1) Filename: ./libpri/libpri1.4_1.4.10.2-1.7864_i386.deb Size: 73546 MD5sum: 9535145a6468a3a8075188055e3e474f SHA1: 8e344dcce52c46460d445e916d95d90a16eece87 SHA256: bb47938ed719587753e186b0fc22d98cd501d260d1c720f4f18052411c3ccbc1 Description: Primary Rate ISDN specification library C implementation of the Primary Rate ISDN specification. It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent Homepage: http://www.asterisk.org/ Package: libpri-dev Priority: optional Section: libdevel Installed-Size: 780 Maintainer: Debian VoIP Team Architecture: i386 Source: libpri Version: 1.4.12-0.9380 Depends: libpri1.4 (= 1.4.12-0.9380) Filename: ./libpri/libpri-dev_1.4.12-0.9380_i386.deb Size: 273454 MD5sum: 821d402d2b0e83351ad7e63291525f48 SHA1: cf36a64a4d2c56ca9bcf36013de1409b1888b870 SHA256: 6cddd6e061ddcaf331ce3eb03844ba2361d85f6713388ef22dc1349f8dcbc62b Description: Primary Rate ISDN specification development files Development files for the C implementation of the Primary Rate ISDN specification. . It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent. Homepage: http://www.asterisk.org/ Package: libpri1.4 Priority: optional Section: libs Installed-Size: 540 Maintainer: Debian VoIP Team Architecture: i386 Source: libpri Version: 1.4.12-0.9380 Depends: libc6 (>= 2.3) Filename: ./libpri/libpri1.4_1.4.12-0.9380_i386.deb Size: 213176 MD5sum: 9a8725eda29353ed365e8c606de2b24a SHA1: 4fc6668ebe6e35ae89bd3f2f29db710197cf8661 SHA256: f01f9e63f1509c7603da2c4e8cfcdd8e562aeead7da9009fd7b8a49ddb1d7c56 Description: Primary Rate ISDN specification library C implementation of the Primary Rate ISDN specification. It was based on the Bellcore specification SR-NWT-002343 for National ISDN. As of May 12, 2001, it has been tested work with NI-2, Nortel DMS-100, and Lucent 5E Custom protocols on switches from Nortel and Lucent Homepage: http://www.asterisk.org/ Package: dahdi Priority: optional Section: comm Installed-Size: 1540 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.6.1-0.9670 Replaces: zaptel Depends: libc6 (>= 2.7), libnewt0.52, libtonezone2.0 (>= 1:2.2.1.1), libusb-0.1-4 (>= 2:0.1.12), perl, procps, fxload, dahdi-linux Conflicts: zaptel Filename: ./dahdi-tools/dahdi_2.6.1-0.9670_i386.deb Size: 445070 MD5sum: dc75b8f005817741d0b10cfe3af3bce3 SHA1: 791f791e6201a578fc61debb015f59f4646ea9b7 SHA256: 1271646db1ff43a82be3aa8e35d8b73b0a80e43c6f19cf385426b1bcd845fc19 Description: utilities for using the DAHDI kernel modules DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes userspace utilities required to configure DAHDI modules. Homepage: http://www.asterisk.org/ Package: libtonezone2.0 Priority: optional Section: libs Installed-Size: 312 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.6.1-0.9670 Depends: libc6 (>= 2.7) Filename: ./dahdi-tools/libtonezone2.0_2.6.1-0.9670_i386.deb Size: 53304 MD5sum: e4a89d27d32020dc44f6f3b0f79612a7 SHA1: 3c0b1a7b07f0e65425af1dd85ec55f9df69230ba SHA256: a9bc990c78488719bbc058813bf84282de0d0b4b00209bd2a3e99fff87a26d92 Description: tonezone library (runtime) A library for generating tones to be sent through the DAHDI telephony interface. Homepage: http://www.asterisk.org/ Package: libtonezone-dev Priority: optional Section: libdevel Installed-Size: 308 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.6.1-0.9670 Depends: libtonezone2.0 (= 1:2.6.1-0.9670) Filename: ./dahdi-tools/libtonezone-dev_2.6.1-0.9670_i386.deb Size: 53842 MD5sum: ca34000a23d9a102b391bb81198c6b51 SHA1: e16dc5f5bcab4528eb9a12881cc0dfe194e3993c SHA256: 449b6caf84644e5316b780e0fee778f1b25beffcaeef4727a9001fe5a9d28b35 Description: tonezone library (development) A library for generating tones to be sent through the DAHDI telephony interface. . This package contains the development files. Homepage: http://www.asterisk.org/ Package: dahdi Priority: optional Section: comm Installed-Size: 1496 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.5.0-0.9247 Replaces: zaptel Depends: libc6 (>= 2.7), libnewt0.52, libtonezone2.0 (>= 1:2.5.0), libusb-0.1-4 (>= 2:0.1.12), perl, procps, fxload, dahdi-linux Conflicts: zaptel Filename: ./dahdi-tools/dahdi_2.5.0-0.9247_i386.deb Size: 427510 MD5sum: 1b5d95c3f61f4b930c5fc043a0b0a45a SHA1: 4934003cd8e3e90ae3ed93a5f478b530cbbbb55d SHA256: 922647034a6d51ee84b2d2abca80327fc21af79863e70cb1b13c3f3e67696bc7 Description: utilities for using the DAHDI kernel modules DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes userspace utilities required to configure DAHDI modules. Homepage: http://www.asterisk.org/ Package: libtonezone2.0 Priority: optional Section: libs Installed-Size: 304 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.5.0-0.9247 Depends: libc6 (>= 2.7) Filename: ./dahdi-tools/libtonezone2.0_2.5.0-0.9247_i386.deb Size: 49402 MD5sum: 6a2ca5b2813b7535c9d07d6262d35f0f SHA1: 21f1086fd6790431ef321621f0e2a3a349183841 SHA256: 9b3adbf96e7f51c8256a4c1ee6be33c230c2ac3fff5878e3a1675fbc173bac9e Description: tonezone library (runtime) A library for generating tones to be sent through the DAHDI telephony interface. Homepage: http://www.asterisk.org/ Package: libtonezone-dev Priority: optional Section: libdevel Installed-Size: 304 Maintainer: Debian VoIP Team Architecture: i386 Source: dahdi-tools Version: 1:2.5.0-0.9247 Depends: libtonezone2.0 (= 1:2.5.0-0.9247) Filename: ./dahdi-tools/libtonezone-dev_2.5.0-0.9247_i386.deb Size: 50300 MD5sum: 1138dd8f3597fc5b2bad5ba9d6934b55 SHA1: 8b165938a31abc71b3f68b29b9c7293366ead8d5 SHA256: 0a0733743e01fe24ed405728ab5296b79770523c9b9742e9efdc25dde31bb68f Description: tonezone library (development) A library for generating tones to be sent through the DAHDI telephony interface. . This package contains the development files. Homepage: http://www.asterisk.org/ Package: dahdi-linux Priority: optional Section: comm Installed-Size: 320 Maintainer: Debian VoIP Team Architecture: all Version: 1:2.6.1+dfsg-0.9653 Replaces: zaptel Depends: procps, fxload Conflicts: zaptel Filename: ./dahdi-linux/dahdi-linux_2.6.1+dfsg-0.9653_all.deb Size: 88548 MD5sum: ae45c6cf5c52e0dd2493af1cf3808f52 SHA1: 5af666d4aa5712bc4e3901932bd95a36fea9b78c SHA256: b44d0c7a1c369d269d83c635d8324cc7931fd9f9c8482e1a7e1502dca53abaf4 Description: DAHDI telephony interface - Linux userspace parts DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes the minimal Linux-specific userspace parts: udev configuration, xpp initialization scripts. Homepage: http://www.asterisk.org/ Package: dahdi-source Priority: optional Section: kernel Installed-Size: 1104 Maintainer: Debian VoIP Team Architecture: all Source: dahdi-linux Version: 1:2.6.1+dfsg-0.9653 Depends: debhelper (>> 4.0), module-assistant (>= 0.8.1), bzip2 Recommends: dahdi-linux Filename: ./dahdi-linux/dahdi-source_2.6.1+dfsg-0.9653_all.deb Size: 983484 MD5sum: f648e8a9c0a9435a13dccaddcba1039f SHA1: dbab6848d187135fa6fb7bfd524c1dbb35493e86 SHA256: 7a1c52ea8bb3e99ab00b08e4976a9791f87eca6dbe60c0c81be90c027997106c Description: DAHDI telephony interface - source code for kernel driver DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment, as well as basic headers for building DAHDI modules and utilities. . It is normally used to build kernel modules package: m-a a-i dahdi Homepage: http://www.asterisk.org/ Package: dahdi-linux Priority: optional Section: comm Installed-Size: 352 Maintainer: Debian VoIP Team Architecture: all Version: 1:2.5.0+dfsg-0.9243 Replaces: zaptel Depends: procps, fxload Conflicts: zaptel Filename: ./dahdi-linux/dahdi-linux_2.5.0+dfsg-0.9243_all.deb Size: 140018 MD5sum: d32035fd1da391ff29e6f43694ae3dfa SHA1: 4bb51216e13e01d5357ddb207f650b04f06c449f SHA256: 1527b04385fd55a911cda3e0361c1a801849184344ba240f300bd0464454da30 Description: DAHDI telephony interface - Linux userspace parts DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes the minimal Linux-specific userspace parts: udev configuration, xpp initialization scripts. Homepage: http://www.asterisk.org/ Package: dahdi-source Priority: optional Section: kernel Installed-Size: 1136 Maintainer: Debian VoIP Team Architecture: all Source: dahdi-linux Version: 1:2.5.0+dfsg-0.9243 Depends: debhelper (>> 4.0), module-assistant (>= 0.8.1), bzip2 Recommends: dahdi-linux Filename: ./dahdi-linux/dahdi-source_2.5.0+dfsg-0.9243_all.deb Size: 1023454 MD5sum: 025920c674bf21e1defa6c24ef9c4156 SHA1: 13138ab0b31ffe6b4c85a19e4c8afe746094a57b SHA256: d731510b93b1ee6e33b34753fec8066fb1e35c117859e3f64dc5cd62eabe75ad Description: DAHDI telephony interface - source code for kernel driver DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment, as well as basic headers for building DAHDI modules and utilities. . It is normally used to build kernel modules package: m-a a-i dahdi Homepage: http://www.asterisk.org/ Package: asterisk-doc Priority: extra Section: doc Installed-Size: 2380 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Recommends: asterisk Filename: ./asterisk/asterisk-doc_1.8.12.0~rc3~dfsg-0.9674_all.deb Size: 1980098 MD5sum: 438b232556d640d975026423d9134b36 SHA1: 7326639f0f02462262368407021490fd2131c815 SHA256: 93993e5239269ad2d86a60e20f051591c8724af7f0bbfeeff380d51816ca1cec Description: Source code documentation for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the documentation for configuring an Asterisk system. Homepage: http://www.asterisk.org/ Package: asterisk-dev Priority: extra Section: devel Installed-Size: 2360 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Recommends: asterisk Filename: ./asterisk/asterisk-dev_1.8.12.0~rc3~dfsg-0.9674_all.deb Size: 941976 MD5sum: d00468571a04bcf9801db7cdf7e97e69 SHA1: be4603fd72f9fe49f47430d216b246300a25bfbd SHA256: f9107cbcf96db7180899f8a6c1e83348a6af6497f6ceaa67feb8a8d99f685032 Description: Development files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the include files used if you wish to compile a package which requires Asterisk's source file headers. Homepage: http://www.asterisk.org/ Package: asterisk-config Priority: optional Section: comm Installed-Size: 1952 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Recommends: asterisk Conflicts: asterisk-config-custom Filename: ./asterisk/asterisk-config_1.8.12.0~rc3~dfsg-0.9674_all.deb Size: 996064 MD5sum: c9dfb7efa6391859904324e65e4696b9 SHA1: f2a08b0bc5e3ecc4b30c4810049cac1b9af08445 SHA256: 93050be78fac5559a44662361d7861d9dfb663cb89d49e3dc0334744f8aceb92 Description: Configuration files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the default configuration files of Asterisk. Homepage: http://www.asterisk.org/ Package: asterisk Priority: optional Section: comm Installed-Size: 3816 Maintainer: Debian VoIP Team Architecture: i386 Version: 1:1.8.12.0~rc3~dfsg-0.9674 Provides: asterisk-1.8 Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.7+20100313), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.1.1), libxml2 (>= 2.7.4), asterisk-config (= 1:1.8.12.0~rc3~dfsg-0.9674) | asterisk-config-custom, asterisk-modules (= 1:1.8.12.0~rc3~dfsg-0.9674), adduser, asterisk-core-sounds-en-gsm | asterisk-prompt-en Recommends: sox, asterisk-voicemail | asterisk-voicemail-storage, asterisk-moh-opsound-gsm Suggests: asterisk-doc, asterisk-dev, asterisk-ooh323, asterisk-dahdi Filename: ./asterisk/asterisk_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 1646008 MD5sum: 95b64621bcd81162962d054e7e558a56 SHA1: 6adff1d434bf6203aaa1f51691853f0ca7b08853 SHA256: 2608c514f47cb913e379b9e1e4f9b0c46258233bfa3bcd0db01f04a8c9039cce Description: Open Source Private Branch Exchange (PBX) Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk can be used with Voice over IP (SIP, H.323, IAX and more) standards, or the Public Switched Telephone Network (PSTN) through supported hardware. . Supported hardware: . * All Wildcard (tm) ISDN PRI cards from Digium (http://www.digium.com) * HFC-S/HFC-4S-based ISDN BRI cards (Junghanns.NET, beroNet, Digium etc.) * All TDM (FXO/FXS) cards from Digium * Various clones of Digium cards such as those by OpenVox * Xorcom Astribank USB telephony adapter (http://www.xorcom.com) * Voicetronix OpenPCI, OpenLine and OpenSwitch cards * CAPI-compatible ISDN cards (using the add-on package chan-capi) * Full Duplex Sound Card (ALSA or OSS) supported by Linux * Tormenta T1/E1 card (http://www.zapatatelephony.org) * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net) . This is the main package that includes the Asterisk daemon and most channel drivers and applications. Homepage: http://www.asterisk.org/ Package: asterisk-modules Priority: optional Section: libs Installed-Size: 6196 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Replaces: asterisk (<< 1:1.8.3.3) Depends: libasound2 (>> 1.0.18), libc6 (>= 2.8), libcurl3-gnutls (>= 7.16.2-1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libgmime-2.4-2 (>= 2.4.11), libgsm1 (>= 1.0.13), libical0 (>= 0.30), libiksemel3, libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libldap-2.4-2 (>= 2.4.7), liblua5.1-0, libneon27-gnutls (>= 0.29.3), libogg0 (>= 1.0rc3), libopenais3 (>= 1.1.2), libpq5 (>= 8.4~0cvs20090328), libradiusclient-ng2, libresample1 (>= 0.1.3), libsdl1.2debian (>= 1.2.10-1), libsnmp15 (>= 5.4.3~dfsg), libspandsp2 (>= 0.0.6~pre18), libspeex1 (>= 1.2~beta3-1), libspeexdsp1 (>= 1.2~beta3.2-1), libsqlite0 (>= 2.8.17), libsqlite3-0 (>= 3.7.3), libsrtp0, libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.1.1), libsybdb5 (>= 0.63), libtiff4, libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvorbisfile3 (>= 1.1.2), libvpb0 (>= 4.2.22), libx11-6, libxml2 (>= 2.7.4), unixodbc (>= 2.2.11), zlib1g (>= 1:1.1.4) Breaks: asterisk (<< 1:1.8.3.3), asterisk-h323 (<< 1:1.8.4.4~dfsg-2) Filename: ./asterisk/asterisk-modules_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 2615398 MD5sum: 52adc1dc2f51ccca6e7981db07ee6bfa SHA1: 07f75b920b99484c137d3f127dcdf20997b03f47 SHA256: bc9ce0e676be8e748d9dbc59a8e539f722819cdbcf984a20dfb9ac23a77b77e5 Description: loadable modules for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes most of the loadable modules of the Asterisk package. There is normally no need to explicitly install it. Homepage: http://www.asterisk.org/ Package: asterisk-dahdi Priority: optional Section: comm Installed-Size: 1320 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Replaces: asterisk (<< 1:1.8.3.3) Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~), libopenr2-3, libpri1.4 (>= 1.4.12), libss7-1 (>= 1.0.2), libtonezone2.0 (>= 1:2.2.1.1), dahdi Breaks: asterisk (<< 1:1.8.3.3) Filename: ./asterisk/asterisk-dahdi_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 878320 MD5sum: 2e4952e8d66852e6322766211a2eb0a6 SHA1: 9cbe16620d5972698c925c8142d524c49d358911 SHA256: b53407738ba62894ad6521378b82f56f6256df6675950d2e3356b6c739c3a1f6 Description: DAHDI devices support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes the DAHDI channel driver (chan_dahdi.so) and a number of other Asterisk modules that require DAHDI support (app_meetme.so, res_timing_dahdi.so). They will not be useful without kernel-level DAHDI support. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail Priority: optional Section: comm Installed-Size: 824 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Replaces: asterisk (<< 1:1.8.3.3) Provides: asterisk-voicemail-storage Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~) Conflicts: asterisk-voicemail-storage Breaks: asterisk (<< 1:1.8.3.3) Filename: ./asterisk/asterisk-voicemail_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 671040 MD5sum: 5a41567204188db5b019b04d7c05d6f8 SHA1: b5af979aa794d1ec9a443604e11bfe064f066532 SHA256: 2ebe2216496b542185e1bc6943db6e9e33e4f320989daed1d3bc75b92ed64525 Description: simple voicemail support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes the standard files-based voicemail storage. This is normally the one you use and is the one that will Just Work. The only reason not to install it is if you want to use a different Asterisk voicemail storage (ODBC or IMAP). . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail-imapstorage Priority: optional Section: comm Installed-Size: 852 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Replaces: asterisk (<< 1:1.8.3.3) Provides: asterisk-voicemail-storage Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc-client2007e, libc6 (>= 2.3.6-6~), libssl0.9.8 (>= 0.9.8m-1) Conflicts: asterisk-voicemail-storage Breaks: asterisk (<< 1:1.8.3.3) Filename: ./asterisk/asterisk-voicemail-imapstorage_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 684394 MD5sum: b5b55a51215f6fe1c47ef020e54f55dd SHA1: 9d6276d08c41ea3cfccc00ff71dc84373c0781f1 SHA256: 9eb242e21634413b4865895ab41d81ff2481cef4e11ef7ab4063a81bc4041ae8 Description: IMAP voicemail storage support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes an IMAP-based voicemail storage: storing the voicemail in a remote IMAP mail boxes. While more complex to set up, it may be useful in some settings. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail-odbcstorage Priority: optional Section: comm Installed-Size: 836 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Replaces: asterisk (<< 1:1.8.3.3) Provides: asterisk-voicemail-storage Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~), unixodbc (>= 2.2.11) Conflicts: asterisk-voicemail-storage Breaks: asterisk (<< 1:1.8.3.3) Filename: ./asterisk/asterisk-voicemail-odbcstorage_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 676666 MD5sum: de3f1c1fb5572b3f15a4926c067336dd SHA1: df557cf897324697e2ad69c5c493221d2ba8d578 SHA256: e3d618a5783c6fcdebc8fecd011073c66d6bbe9e06eff856970dabcbbacdca7e Description: ODBC voicemail storage support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes an database-based voicemail storage: storing the voicemail in a database accessed through the ODBC interface. While more complex to set up, it may be useful in some settings. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-ooh323 Priority: optional Section: comm Installed-Size: 1856 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-ooh323_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 975456 MD5sum: 53f3c07fed5f7e954664da1412f3c118 SHA1: e2e4a3dc989ead4f46ff9bbe3445d410099b61a9 SHA256: 465fb90882e1f616a44d73d7fe6062939531bd34d9905a82aa3d3809f0879247 Description: H.323 protocol support for the Asterisk PBX - ooH323c Asterisk is an Open Source PBX and telephony toolkit. . This channel driver (chan_ooh323c) provides support for the H.323 protocol for Asterisk. This is an independent implementation that does not depend on OpenH323, but may be less functional than the original chan_h323. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-mp3 Priority: optional Section: comm Installed-Size: 684 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-mp3_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 615946 MD5sum: df835a0c78cd1cfaeed5c4313b77da6f SHA1: 43e5bbf2b34e7cd7679ca7f2cb0350356f0cb2f3 SHA256: a944a794ebb6010372fae9cba2c5ff3d61e78774980ec830c32653824d7fba34 Description: MP3 playback support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package provides support for playing MP3-encoded files in Asterisk. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-doc Priority: extra Section: doc Installed-Size: 4536 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.4.2-1.8979 Recommends: asterisk Filename: ./asterisk/asterisk-doc_1.8.4.2-1.8979_all.deb Size: 4266258 MD5sum: 5e5b2ce791f37e42c10a46e6db027a91 SHA1: 1e302be0e506b74f69c92b12360c8353e9554ef1 SHA256: 6302906a3dd85adace9aea280e5e516fe97b17c200f0d512052e5b56b5071023 Description: Source code documentation for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the documentation for configuring an Asterisk system. Homepage: http://www.asterisk.org/ Package: asterisk-dev Priority: extra Section: devel Installed-Size: 2172 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1:1.4.21.1~dfsg-1) Recommends: asterisk Filename: ./asterisk/asterisk-dev_1.8.4.2-1.8979_all.deb Size: 791146 MD5sum: 7db840c6d37fea0e6f528bbce2f677e9 SHA1: 60cfb139c72f5456f175bd19c98b6aad7b991420 SHA256: ee9d6aafd6a2fde1813b97354a58d537a772dacd0daf074fd4777f3e4b7039ea Description: Development files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the include files used if you wish to compile a package which requires Asterisk's source file headers. Homepage: http://www.asterisk.org/ Package: asterisk-config Priority: optional Section: comm Installed-Size: 1800 Maintainer: Debian VoIP Team Architecture: all Source: asterisk Version: 1:1.8.4.2-1.8979 Recommends: asterisk Conflicts: asterisk-config-custom Filename: ./asterisk/asterisk-config_1.8.4.2-1.8979_all.deb Size: 845938 MD5sum: ea9d0fd1240d6d91676b7b94059be4ce SHA1: e6087c0e0c01d587dad3f658a1137f7d4d35e69a SHA256: c9a037390015a9b5c01801ea73fbc4ee25285abab9ae77be154df85f1a1dd7d2 Description: Configuration files for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package contains the default configuration files of Asterisk. Homepage: http://www.asterisk.org/ Package: asterisk Priority: optional Section: comm Installed-Size: 3620 Maintainer: Debian VoIP Team Architecture: i386 Version: 1:1.8.4.2-1.8979 Provides: asterisk-1.8 Depends: libc6 (>= 2.4), libcap2 (>= 2.10), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.7+20100313), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.1.1), libxml2 (>= 2.7.4), asterisk-config (= 1:1.8.4.2-1.8979) | asterisk-config-custom, asterisk-modules (= 1:1.8.4.2-1.8979), adduser, asterisk-core-sounds-en-gsm | asterisk-prompt-en Recommends: sox, asterisk-voicemail | asterisk-voicemail-storage, asterisk-moh-opsound-gsm Suggests: asterisk-doc, asterisk-dev, asterisk-ooh323, asterisk-dahdi Filename: ./asterisk/asterisk_1.8.4.2-1.8979_i386.deb Size: 1479542 MD5sum: e4953737648ee0ec826ce7db288de39b SHA1: e948b58c590616549508a9c151b53beaac9bd793 SHA256: 0b70a7270dd03f43d204fcba494640f27df89e4231ad4022c7e8483a3ed6c6b1 Description: Open Source Private Branch Exchange (PBX) Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk can be used with Voice over IP (SIP, H.323, IAX and more) standards, or the Public Switched Telephone Network (PSTN) through supported hardware. . Supported hardware: . * All Wildcard (tm) ISDN PRI cards from Digium (http://www.digium.com) * HFC-S/HFC-4S-based ISDN BRI cards (Junghanns.NET, beroNet, Digium etc.) * All TDM (FXO/FXS) cards from Digium * Various clones of Digium cards such as those by OpenVox * Xorcom Astribank USB telephony adapter (http://www.xorcom.com) * Voicetronix OpenPCI, OpenLine and OpenSwitch cards * CAPI-compatible ISDN cards (using the add-on package chan-capi) * Full Duplex Sound Card (ALSA or OSS) supported by Linux * Tormenta T1/E1 card (http://www.zapatatelephony.org) * QuickNet Internet PhoneJack and LineJack (http://www.quicknet.net) . This is the main package that includes the Asterisk daemon and most channel drivers and applications. Homepage: http://www.asterisk.org/ Package: asterisk-modules Priority: optional Section: libs Installed-Size: 5920 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1.8.3) Depends: libasound2 (>> 1.0.18), libc6 (>= 2.8), libcurl3 (>= 7.16.2-1), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libgmime-2.0-2a, libgsm1 (>= 1.0.13), libical0 (>= 0.30), libiksemel3, libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libldap-2.4-2 (>= 2.4.7), liblua5.1-0, libneon27 (>= 0.29.3), libogg0 (>= 1.0rc3), libopenais3 (>= 1.1.2), libpq5 (>= 8.4~0cvs20090328), libradiusclient-ng2, libresample1 (>= 0.1.3), libsdl1.2debian (>= 1.2.10-1), libsnmp15 (>= 5.4.3~dfsg), libspandsp2, libspeex1 (>= 1.2~beta3-1), libspeexdsp1 (>= 1.2~beta3.2-1), libsqlite0 (>= 2.8.17), libsqlite3-0 (>= 3.7.3), libsrtp0, libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.1.1), libsybdb5 (>= 0.63), libtiff4, libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpb0 (>= 4.2.22), libx11-6, libxml2 (>= 2.7.4), unixodbc (>= 2.2.11), zlib1g (>= 1:1.1.4) Breaks: asterisk (<< 1.8.3) Filename: ./asterisk/asterisk-modules_1.8.4.2-1.8979_i386.deb Size: 2418686 MD5sum: 73d1aa3d0462e608efb9b9fafd9fcfbb SHA1: cf1778deeff13ec7125408b36d03de82e42be905 SHA256: dca2e0db385f23916e6d6b28407c206c93b5b05a0c8b85665c6e87bcfa689907 Description: loadable modules for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes most of the loadable modules of the Asterisk package. There is normally no need to explicitly install it. Homepage: http://www.asterisk.org/ Package: asterisk-h323 Priority: optional Section: comm Installed-Size: 932 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk, libc6 (>= 2.3.6-6~), libexpat1 (>= 1.95.8), libgcc1 (>= 1:4.1.1), libldap-2.4-2 (>= 2.4.7), libopenh323-1.18.0 (>= 1.18.0~) | libopenh323-1.18.0-develop (>= 1.18.0~), libpt-1.10.10 (>= 1.10.10~), libsasl2-2, libsdl1.2debian (>= 1.2.10-1), libssl0.9.8 (>= 0.9.8m-1), libstdc++6 (>= 4.4.0) Filename: ./asterisk/asterisk-h323_1.8.4.2-1.8979_i386.deb Size: 599902 MD5sum: 4bed80129daa61d85b4fc622681a65de SHA1: c84f5b6ec19ae33006ee06e44075aabcb6680db5 SHA256: 0a5b9f656bc486e3ee093082afa8b39e3822313e7521667ddd67cc916fafff23 Description: H.323 protocol support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This channel driver (chan_h323) provides support for the H.323 protocol for Asterisk. This is an implementation originally contributed by NuFone and nowdays maintained and distributed by Digium, Inc. Hence, it is considered the official H.323 chanel driver. . There is another H.323 channel implementations for Asterisk: chan_ooh323, distributed by Debian as asterisk-ooh323c. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-dahdi Priority: optional Section: comm Installed-Size: 1140 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1.8.0) Depends: asterisk, libc6 (>= 2.3.6-6~), libopenr2-3, libpri1.4 (>= 1.4.11), libss7-1 (>= 1.0), libtonezone2.0 (>= 1:2.4.1), dahdi Breaks: asterisk (<< 1.8.0) Filename: ./asterisk/asterisk-dahdi_1.8.4.2-1.8979_i386.deb Size: 715206 MD5sum: 849fa5ab2450799dcb2df509abdccc89 SHA1: fa8b1a1a8ac5fd802dc5ad868cafe025c9735710 SHA256: 447bb40b6313abfd8464748f97b164a07f082156737320d68114e6507cfbd3e9 Description: DAHDI devices support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes the DAHDI channel driver (chan_dahdi.so) and a number of other Asterisk modules that require DAHDI support (app_meetme.so, res_timing_dahdi.so). They will not be useful without kernel-level DAHDI support. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail Priority: optional Section: comm Installed-Size: 680 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1.8.0) Provides: asterisk-vocemail-storage Depends: asterisk, libc6 (>= 2.3.6-6~) Conflicts: asterisk-vocemail-storage Breaks: asterisk (<< 1.8.0) Filename: ./asterisk/asterisk-voicemail_1.8.4.2-1.8979_i386.deb Size: 525318 MD5sum: 0ddec53f542c2009631cfcbad70fd1a7 SHA1: 8ac582bd4321aefd46db066e1ad80a7a68f94255 SHA256: 7dc36f65bf5043712a9a41bdef6f0a0fb1f19d451205e3b6b2ef0c94d6babdd8 Description: simple voicemail support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes the standard files-based voicemail storage. This is normally the one you use and is the one that will Just Work. The only reason not to install it is if you want to use a different Asterisk voicemail storage (ODBC or IMAP). . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail-imapstorage Priority: optional Section: comm Installed-Size: 712 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1.8.0) Provides: asterisk-vocemail-storage Depends: asterisk, libc-client2007e, libc6 (>= 2.3.6-6~), libssl0.9.8 (>= 0.9.8m-1) Conflicts: asterisk-vocemail-storage Breaks: asterisk (<< 1.8.0) Filename: ./asterisk/asterisk-voicemail-imapstorage_1.8.4.2-1.8979_i386.deb Size: 538812 MD5sum: 4e82c03bccd12e55204aa9b1dfc3bfd0 SHA1: 986fd961e8e745afa5f2593ad18233b343c8bffe SHA256: c72e2c6d3def0629c0c11534546440dfa7acf114d944edcb5278441e9a2cab16 Description: IMAP voicemail storage support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes an IMAP-based voicemail storage: storing the voicemail in a remote IMAP mail boxes. While more complex to set up, it may be useful in some settings. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-voicemail-odbcstorage Priority: optional Section: comm Installed-Size: 692 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Replaces: asterisk (<< 1.8.0) Provides: asterisk-vocemail-storage Depends: asterisk, libc6 (>= 2.3.6-6~), unixodbc (>= 2.2.11) Conflicts: asterisk-vocemail-storage Breaks: asterisk (<< 1.8.0) Filename: ./asterisk/asterisk-voicemail-odbcstorage_1.8.4.2-1.8979_i386.deb Size: 530116 MD5sum: 13aecfceb0d4a51348841a278b91abab SHA1: 66c0ecb59405339e3f980b13c3aa865437dd0706 SHA256: 043eb3c960057a7ab186b524d0310324a5435ff4598a2135d809b2e22ca26302 Description: ODBC voicemail storage support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package includes an database-based voicemail storage: storing the voicemail in a database accessed through the ODBC interface. While more complex to set up, it may be useful in some settings. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-ooh323 Priority: optional Section: comm Installed-Size: 1708 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk, libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-ooh323_1.8.4.2-1.8979_i386.deb Size: 828762 MD5sum: c75540699be4f65245b221d739d277ca SHA1: 45e722789bf989773d339466527520a450e31ba9 SHA256: bce5cd3152f77b22f45c75966ad158952c92799fa060cd2794e25b14522d69e7 Description: H.323 protocol support for the Asterisk PBX - ooH323c Asterisk is an Open Source PBX and telephony toolkit. . This channel driver (chan_ooh323c) provides support for the H.323 protocol for Asterisk. This is an independent implementation that does not depend on OpenH323, but may be less functional than the original chan_h323. . This is one of many H.323 channel implementations for Asterisk with other being chan_h323, distributed by Debian as asterisk-h323. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-mp3 Priority: optional Section: comm Installed-Size: 544 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk, libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-mp3_1.8.4.2-1.8979_i386.deb Size: 471180 MD5sum: d3efebe9d6048e92a45ac843586a2d7a SHA1: 65afa111a7a991ce854db52594b52934d8e352bf SHA256: cd34943f49f9db65822dda77b97a93ee12adc4f33a62eeb4a6a45de0bdf59e63 Description: MP3 playback support for the Asterisk PBX (DUMMY) Asterisk is an Open Source PBX and telephony toolkit. . This package SHOULD provide support for playing MP3-encoded files in Asterisk. Due to build issues it is merely an empty package for now. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-mysql Priority: optional Section: comm Installed-Size: 612 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk, libc6 (>= 2.3.6-6~), libmysqlclient16 (>= 5.1.21-1) Filename: ./asterisk/asterisk-mysql_1.8.4.2-1.8979_i386.deb Size: 490670 MD5sum: 0117483c7891aedfc3c0fd3879bef623 SHA1: f1f94a41e59e22b4f77bda1bc847ec6f5f597b6e SHA256: 71476035834cd8cd89bd6114d4ca51b04b6292d058eac720e15dd484044259aa Description: MySQL database protocol support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package provides support for using a MySQL database to store configuration, call-detatils record, and also provides generic access to it from the dialplan. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-mobile Priority: optional Section: comm Installed-Size: 580 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk, libbluetooth3 (>= 4.43), libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-mobile_1.8.4.2-1.8979_i386.deb Size: 482308 MD5sum: 2d07360c0fc664a145fdb8b28d13ee2d SHA1: 2150a4d5e7053c7bd701e3c170b93baeed46f0b9 SHA256: 74a46f36b0b31f2cf4b1e653b52ace45e3b206dc09cd8ee3b9d3d431d63d0640 Description: Bluetooth phone support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package provides support for connecting Bluetooth devices to the Asterisk PBX. It allows you to: * Send and receive PSTN calls and SMS messages over a Bluetooth phone. * Use a Bluetooth handset as a local phone connected to your PBX. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-dbg Priority: extra Section: debug Installed-Size: 83452 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.4.2-1.8979 Depends: asterisk (= 1:1.8.4.2-1.8979) Filename: ./asterisk/asterisk-dbg_1.8.4.2-1.8979_i386.deb Size: 27337034 MD5sum: b4e1dc1a9f42c799a63fa174f4854de1 SHA1: f711a6284ce379ad60a84cc70f0594c508298b6e SHA256: 6cab36e472062e4d8ff988803f8f6fdcd38b89345ccfed99350b8ba77bf50537 Description: Debugging symbols for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package includes the debugging symbols useful for debugging Asterisk. The debugging symbols are used for execution tracing and core dump analysis. Homepage: http://www.asterisk.org/ Package: asterisk-mysql Priority: optional Section: comm Installed-Size: 752 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libc6 (>= 2.3.6-6~), libmysqlclient16 (>= 5.1.21-1) Filename: ./asterisk/asterisk-mysql_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 635580 MD5sum: 0055fd66a26c67457b503f4dd272bd23 SHA1: a6f9e6c00b45af0aaa3881b7fa78673373afc909 SHA256: 538a313deb754c965ccf6a80d12805c0645069cd22f53aa8765044c1da91fe55 Description: MySQL database protocol support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package provides support for using a MySQL database to store configuration, call-detatils record, and also provides generic access to it from the dialplan. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-mobile Priority: optional Section: comm Installed-Size: 720 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674), libbluetooth3 (>= 4.43), libc6 (>= 2.3.6-6~) Filename: ./asterisk/asterisk-mobile_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 626926 MD5sum: d657877c32fe667fbcc9a6771cf61a7e SHA1: 38172aa2cd8ee055410653d217de929b52117f06 SHA256: f5f6eb31cbe17840d3bea61750f1fa72743764f648904dfcfdb9cfb7eafce34c Description: Bluetooth phone support for the Asterisk PBX Asterisk is an Open Source PBX and telephony toolkit. . This package provides support for connecting Bluetooth devices to the Asterisk PBX. It allows you to: * Send and receive PSTN calls and SMS messages over a Bluetooth phone. * Use a Bluetooth handset as a local phone connected to your PBX. . For more information about the Asterisk PBX, have a look at the Asterisk package. Homepage: http://www.asterisk.org/ Package: asterisk-dbg Priority: extra Section: debug Installed-Size: 84392 Maintainer: Debian VoIP Team Architecture: i386 Source: asterisk Version: 1:1.8.12.0~rc3~dfsg-0.9674 Depends: asterisk (= 1:1.8.12.0~rc3~dfsg-0.9674) Filename: ./asterisk/asterisk-dbg_1.8.12.0~rc3~dfsg-0.9674_i386.deb Size: 27617924 MD5sum: feb2dabf2aaf6de71a651eeba43f23f8 SHA1: 1023cfb75c869660e29329b9e1219a5726bfa0a8 SHA256: d8409bc88a654a7097967f6c78e4d70264c3975eafb366660a23044a4bf33315 Description: Debugging symbols for Asterisk Asterisk is an Open Source PBX and telephony toolkit. . This package includes the debugging symbols useful for debugging Asterisk. The debugging symbols are used for execution tracing and core dump analysis. Homepage: http://www.asterisk.org/ Package: dahdi-firmware-nonfree Priority: extra Section: non-free/comm Installed-Size: 2192 Maintainer: Debian VoIP Team Architecture: all Source: dahdi-firmware Version: 2.6.1-0.9673 Replaces: zaptel-firmware Conflicts: zaptel-firmware Breaks: dahdi (<< 1:2.2.1) Filename: ./dahdi-firmware/dahdi-firmware-nonfree_2.6.1-0.9673_all.deb Size: 810896 MD5sum: 39acef24d828a8d06003bf99acaa1e8a SHA1: b281b6c60a3068a69137ddc82e54fd443f2d1243 SHA256: 00af14cdbe360e231ad0ff24ece4fcef6a450a053d57fc5e62013f5e64fc4b23 Description: DAHDI non-free firmware DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes the non-free firmwares from the DAHDI tarball as well as downloading script for the Digium firmwares that are normally downloaded on 'make install'. Homepage: http://www.asterisk.org/ Package: dahdi-firmware-nonfree Priority: extra Section: non-free/comm Installed-Size: 1048 Maintainer: Debian VoIP Team Architecture: all Source: dahdi-firmware Version: 2.5.0-0.9254 Replaces: zaptel-firmware Conflicts: zaptel-firmware Breaks: dahdi (<< 1:2.2.1) Filename: ./dahdi-firmware/dahdi-firmware-nonfree_2.5.0-0.9254_all.deb Size: 472758 MD5sum: 4d624fbf0e4ec4259ecc4f4bfb2027e0 SHA1: 88b002e1925f10e1850dd216dff3c36453388a21 SHA256: 381a008e3cd6b532999af092de92655878a3cc7ce8b952de728cd61978ddacb5 Description: DAHDI non-free firmware DAHDI (formly Zaptel) is an interface for telephony devices used by e.g. the Asterisk PBX software. The dahdi-* packages provide the kernel DAHDI kernel modules and their required setup environment. . This package includes the non-free firmwares from the DAHDI tarball as well as downloading script for the Digium firmwares that are normally downloaded on 'make install'. Homepage: http://www.asterisk.org/ Package: asterisk-gui Priority: optional Section: comm Installed-Size: 2388 Maintainer: Debian VoIP Team Architecture: all Version: 2.1.0~rc1-0.9024 Depends: asterisk (>= 1.4.0~0), libjs-jquery Recommends: zaptel (>= 1.4.8~dfsg) | dahdi Filename: ./asterisk-gui/asterisk-gui_2.1.0~rc1-0.9024_all.deb Size: 490032 MD5sum: ca3307e9b4ec1e1910ddb63277de2374 SHA1: f133e65c849f344bada145d8ca39f67bd17079df SHA256: f8fe9554809ae19e241bfab97c54d2aedb273400ab387723f9ea3a978afcfe7c Description: web-based user interface for the Asterisk PBX Asterisk <= 1.4 comes with a built-in http server and support for "AJAM": Asynchronous Javascript Asterisk Manger (AJAX-based manager interface). . This package includes static HTML, javascript and extra configurations to make a working user interface through that support. It provides a relatively simple and non-intrusive GUI for managing Asterisk. Homepage: http://www.asterisk.org/ Package: libmisdnv2user-dev Priority: extra Section: libdevel Installed-Size: 252 Maintainer: Debian VoIP Team Architecture: i386 Source: misdnv2user Version: 1.7~20100525-1 Depends: linux-libc-dev (>= 2.6.26) Conflicts: libmisdn-dev Filename: ./misdnv2user/libmisdnv2user-dev_1.7~20100525-1_i386.deb Size: 58466 MD5sum: 2ad6dad4ecaf290ae4f15811884046f9 SHA1: 54245bc7ef9b5d61cf4a62d0a0764e58bfa8ca57 SHA256: dadec1336dcd69ee7588a6049999d5b9dc3a0189e9e1460d18849c9fd4641d41 Description: new ISDN driver for Linux - user space libs and tools mISDN supports a complete BRI and PRI ETSI compliant DSS1 protocol stack for the TE mode and for the NT mode. It is the successor of the "old" isdn4linux subsystem, in particular its "HiSax" family of drivers. It has growing support for the interface cards of hisax and additionally supports the cool HFCmulti chip based cards. . This is misdn v2 (aka socket branch), matching kernel driver in kernel > 2.6.26 . This package contains the files for development Homepage: http://www.misdn.org/index.php/Main_Page Package: misdnv2user-utils Priority: extra Section: comm Installed-Size: 256 Maintainer: Debian VoIP Team Architecture: i386 Source: misdnv2user Version: 1.7~20100525-1 Depends: libc6 (>= 2.7-1) Conflicts: libmisdn-dev Filename: ./misdnv2user/misdnv2user-utils_1.7~20100525-1_i386.deb Size: 71724 MD5sum: 667fe2c18e86522a67af310aa173ce4a SHA1: 11c26f664588b470ba27485159b2a7505bfe4552 SHA256: ffbdf0f4935f09ee39a78b82b956b9454a331f2c53253d1a5dc28fed75644435 Description: new ISDN driver for Linux - user space libs and tools mISDN supports a complete BRI and PRI ETSI compliant DSS1 protocol stack for the TE mode and for the NT mode. It is the successor of the "old" isdn4linux subsystem, in particular its "HiSax" family of drivers. It has growing support for the interface cards of hisax and additionally supports the cool HFCmulti chip based cards. . This is misdn v2 (aka socket branch), matching kernel driver in kernel > 2.6.26 . This package contains the user space tools Homepage: http://www.misdn.org/index.php/Main_Page Package: lcr Priority: extra Section: comm Installed-Size: 9448 Maintainer: Debian VoIP Team Architecture: i386 Version: 1.7~20100601-1 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.1.1), libncurses5 (>= 5.6+20071006-3), libstdc++6 (>= 4.1.1), lsb-base (>= 3.0-6) Suggests: asterisk Filename: ./lcr/lcr_1.7~20100601-1_i386.deb Size: 5009056 MD5sum: c7d4a651d032f6e407b0207f812e8613 SHA1: 851d87a231cc4ffe4f94a5bb867dba4604829d90 SHA256: 29ebefe76533eb4dcf0b253dc4f9c6a010b9a5f5f5fe2132e73ffdf4716b01b0 Description: LinuxCallRouter - an ISDN based PBX for Linux Formerly known as "PBX4Linux", Linux-Call-Router is not only a router, it is a real ISDN PBX which interconnects ISDN telephones and ISDN lines. It is possible to connect telephones to a Linux box. It is a pure software solution except for the ISDN cards and telephones. The great benefit is the NT-mode that allows to connect telephones to an ISDN card. Special cards are needed and a little bit of different cabeling. It supports lots of features, that only expensive PBXs have. It include a channel driver that can link LCR to Asterisk PBX. Homepage: http://isdn.eversberg.eu/download/lcr-1.7/ Package: libglib1.2ldbl Priority: optional Section: oldlibs Installed-Size: 268 Maintainer: Daniel Baumann Architecture: i386 Source: glib1.2 Version: 1.2.10-19 Replaces: libglib1.2 Depends: libc6 (>= 2.3.6-6~) Conflicts: libglib1.2 Filename: ./glib1.2/libglib1.2ldbl_1.2.10-19_i386.deb Size: 123968 MD5sum: ed2d036f51c3b3a78e88c797486c1429 SHA1: 792b5c70d156475ce5648b465bfff46074a4165c SHA256: 12b4cf524953496b34d35181727b9bd286fef6eef26624513927ef9e1ef0c1d4 Description: The GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. Package: libglib1.2-dev Priority: optional Section: oldlibs Installed-Size: 556 Maintainer: Daniel Baumann Architecture: i386 Source: glib1.2 Version: 1.2.10-19 Provides: libglib-dev Depends: libglib1.2ldbl (= 1.2.10-19), pkg-config Filename: ./glib1.2/libglib1.2-dev_1.2.10-19_i386.deb Size: 178084 MD5sum: 9414bd6a4b7cdab8548f9ec4e2217b63 SHA1: 3e884d656cfc57d59882227e43f1f49a0ebde1ac SHA256: ebe5bbe4620265fd546d436c86c8c8d75f1d47bb701fd4921606bf70c8689bc8 Description: The GLib library of C routines (development) GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. . This package contains the development files. Package: libglib1.2-dbg Priority: extra Section: devel Installed-Size: 424 Maintainer: Daniel Baumann Architecture: i386 Source: glib1.2 Version: 1.2.10-19 Depends: libglib1.2ldbl (= 1.2.10-19), libglib1.2-dev (= 1.2.10-19) Filename: ./glib1.2/libglib1.2-dbg_1.2.10-19_i386.deb Size: 184332 MD5sum: 6dd8441cc4782f9bd305290417d3728c SHA1: 42238a80f3e1e454b89df4351f91a9f7b17c7ee8 SHA256: e8f795a50b62ef836b6cf0bb6c7c6e03dcf4d0e4e3276feeaa8568dc318ae81d Description: The GLib library of C routines (debug) GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. . This package contains the debug symbols. Package: libglib1.2-dbg Priority: extra Section: devel Installed-Size: 520 Maintainer: Daniel Baumann Architecture: amd64 Source: glib1.2 Version: 1.2.10-19 Depends: libglib1.2ldbl (= 1.2.10-19), libglib1.2-dev (= 1.2.10-19) Filename: ./glib1.2/libglib1.2-dbg_1.2.10-19_amd64.deb Size: 191458 MD5sum: 43240e45321fd11cb18e25791837809a SHA1: d19624d99d62597ef91428983f779010613cc286 SHA256: 308f35142cd4f9d5bde008351a60114e1e5c5a611cc2fbcce3b52f9c6017e277 Description: The GLib library of C routines (debug) GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. . This package contains the debug symbols. Package: libglib1.2-dev Priority: optional Section: oldlibs Installed-Size: 696 Maintainer: Daniel Baumann Architecture: amd64 Source: glib1.2 Version: 1.2.10-19 Provides: libglib-dev Depends: libglib1.2ldbl (= 1.2.10-19), pkg-config Filename: ./glib1.2/libglib1.2-dev_1.2.10-19_amd64.deb Size: 196716 MD5sum: 4dbf9ce27b873e580afe784ecd4754d4 SHA1: a2bb1b38001144e0720d81339ea25e5079bdd2d3 SHA256: de41811cd059aac58077e178655acdb88c161777e1c5469b8427e91e4889aa38 Description: The GLib library of C routines (development) GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. . This package contains the development files. Package: libglib1.2ldbl Priority: optional Section: oldlibs Installed-Size: 304 Maintainer: Daniel Baumann Architecture: amd64 Source: glib1.2 Version: 1.2.10-19 Replaces: libglib1.2 Depends: libc6 (>= 2.7-1) Conflicts: libglib1.2 Filename: ./glib1.2/libglib1.2ldbl_1.2.10-19_amd64.deb Size: 139082 MD5sum: d77e48281e52803f09a8d32bb7596378 SHA1: d95827dfcc6d94cfbaf184ad54d89df96a052b2a SHA256: 22d690e4b197af4656ab1430540f4c6210b858feaff846a3dbcc7d81cd31467a Description: The GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, and lists. GLib was previously distributed with the GTK+ toolkit, but has been split off as of version 1.1.0. Package: linux-sound-base Priority: optional Section: sound Installed-Size: 132 Maintainer: Ubuntu Core Developers Architecture: all Source: alsa-driver Version: 1.0.24+dfsg-0ubuntu1 Replaces: alsa-base (<= 1.0.8-7) Depends: debconf (>= 0.5) | debconf-2.0, module-init-tools (>= 3.2.1) Suggests: alsa-base (>= 1.0.18-1) Conflicts: alsa-base (<= 1.0.8-7) Filename: ./alsa-driver/linux-sound-base_1.0.24+dfsg-0ubuntu1_all.deb Size: 35268 MD5sum: b25ab8e6771c674339aa9f055dd2326e SHA1: 5eb31a4c5cae333b9383dae2b9161c826cc7226f SHA256: 45f4992bacd167570651a75d24657e94e613c6e85fae517d54b40a9da32db7af Description: base package for ALSA and OSS sound systems This package allows the administrator to choose between the OSS and ALSA sound systems. . ALSA is the Advanced Linux Sound Architecture. OSS is the free version of the Open Sound System. Homepage: http://www.alsa-project.org/ Original-Maintainer: Debian ALSA Maintainers Package: alsa-base Priority: optional Section: sound Installed-Size: 516 Maintainer: Ubuntu Core Developers Architecture: all Source: alsa-driver Version: 1.0.24+dfsg-0ubuntu1 Provides: alsa Depends: lsof (>= 4.64), module-init-tools (>= 3.2.1), linux-sound-base, udev Recommends: alsa-utils Suggests: apmd (>= 3.0.2-1), alsa-oss, oss-compat Conflicts: alsa-utils (<< 1.0.9a-4), discover (<< 2.0.7-1), discover1 (<< 1.7.3), lsof-2.2 (<< 4.64), modutils (= 2.3.20-1) Filename: ./alsa-driver/alsa-base_1.0.24+dfsg-0ubuntu1_all.deb Size: 317850 MD5sum: dd23fe9d945208374b1f8cbbb25f15ae SHA1: fcb4a4895f021fc931a3bc97fa9a61436ee79772 SHA256: e701e0e0b70e2666d9e673c48b640fc3e4a8f99da31ef073cd95de25c5d95527 Description: ALSA driver configuration files This package contains various configuration files for the ALSA drivers. . For ALSA to work on a system with a given sound card, there must be an ALSA driver for that card in the kernel. Linux 2.6 as shipped in linux-image packages contains ALSA drivers for all supported sound cards in the form of loadable modules. A custom alsa-modules package can be built from the sources in the alsa-source package using the m-a utility (included in the module-assistant package). Please read the README.Debian file for more information about loading and building modules. . ALSA is the Advanced Linux Sound Architecture. Homepage: http://www.alsa-project.org/ Original-Maintainer: Debian ALSA Maintainers Package: alsa-source Priority: optional Section: kernel Installed-Size: 4080 Maintainer: Ubuntu Core Developers Architecture: all Source: alsa-driver Version: 1.0.24+dfsg-0ubuntu1 Depends: debconf (>= 0.5) | debconf-2.0, make, gcc | c-compiler, dpkg-dev, debhelper (>= 5.0.37), debconf-utils, bzip2 Recommends: fakeroot, module-assistant, linux-headers Suggests: kernel-package Filename: ./alsa-driver/alsa-source_1.0.24+dfsg-0ubuntu1_all.deb Size: 4036008 MD5sum: 2dcc4d3232fa61d0ecdefa31da44940f SHA1: f1b0323667599ec039a740efeacefb6a0f5e3120 SHA256: 4512953d5e38839a8a69c934356ddccc72e2e06da5e7739dd75a65fc129e1cf4 Description: ALSA driver sources This package contains the source code for the ALSA drivers. The source code can be compiled into an alsa-modules package using the m-a utility (available in the module-assistant package). Please note that the kernel headers must be installed to compile these modules. Please read the README.Debian file for more information about loading and building modules. . ALSA is the Advanced Linux Sound Architecture. Homepage: http://www.alsa-project.org/ Original-Maintainer: Debian ALSA Maintainers Package: crda Priority: optional Section: net Installed-Size: 136 Maintainer: Ben Hutchings Architecture: i386 Version: 1.1.1-1 Depends: libc6 (>= 2.1), libnl1 (>= 1.1), libssl0.9.8 (>= 0.9.8m-1), wireless-regdb Recommends: iw Filename: ./crda/crda_1.1.1-1_i386.deb Size: 13272 MD5sum: 44c5478e6259a2e7cac2bb1ccaa60ae9 SHA1: b31bc4adac94245e82c8963dfb0d22bc674ea47d SHA256: 2d6422ba18bec971c72095ac66a6485ae444430fbace8818d5702e90bd87044f Description: wireless Central Regulatory Domain Agent This package provides a Central Regulatory Domain Agent (CRDA) to be used by the Linux kernel cf80211 wireless subsystem to query and apply the regulatory domain settings wireless devices may operate within for a given location. . CRDA queries operational frequency regulations stored within the regulatory database provided by the wireless-regdb package. Homepage: http://wireless.kernel.org/en/developers/Regulatory/#CRDA Package: crda Priority: optional Section: net Installed-Size: 140 Maintainer: Ben Hutchings Architecture: amd64 Version: 1.1.1-1 Depends: libc6 (>= 2.7-1), libnl1, libssl0.9.8 (>= 0.9.8f-5), wireless-regdb Recommends: iw Filename: ./crda/crda_1.1.1-1_amd64.deb Size: 14164 MD5sum: 68f8682c05b262d6044c1d2f7b9294fe SHA1: b707cf7c4a5bb3758f3c2eab0dad73580d0d4242 SHA256: 6961ddc36584a2901e18f9aa788f89b33a337a9c0a6a3699f43fa3672cdd34b5 Description: wireless Central Regulatory Domain Agent This package provides a Central Regulatory Domain Agent (CRDA) to be used by the Linux kernel cf80211 wireless subsystem to query and apply the regulatory domain settings wireless devices may operate within for a given location. . CRDA queries operational frequency regulations stored within the regulatory database provided by the wireless-regdb package. Homepage: http://wireless.kernel.org/en/developers/Regulatory/#CRDA Package: wireless-regdb Priority: optional Section: net Installed-Size: 56 Maintainer: Ben Hutchings Architecture: all Version: 2010.11.24-2 Suggests: crda Filename: ./wireless-regdb/wireless-regdb_2010.11.24-2_all.deb Size: 5010 MD5sum: 31e0cd780647e8a5f51dbb3f45d77402 SHA1: 04898c9115b1f3fd22eb0a7423c314cee335d3c7 SHA256: 4964758b4c2f676191820060399943baa87879e580969623345fd12f1c54be37 Description: wireless regulatory database This package contains the wireless regulatory database used by the Central Regulatory Database Agent (CRDA) to configure wireless devices to operate within the radio spectrum allowed in the local jurisdiction. . This regulatory information is provided with no warranty either expressed or implied. Only Linux drivers which use cfg80211 framework can make use of the regulatory database and CRDA. Homepage: http://wireless.kernel.org/en/developers/Regulatory/#Theregulatorydatabase Package: asterisk-core-sounds-en-g722 Priority: extra Section: comm Installed-Size: 10036 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-en-gsm | asterisk-sounds-main (>= 1.6.2.6) Filename: ./asterisk-core-sounds/asterisk-core-sounds-en-g722_1.4.21-1.8944_all.deb Size: 8090884 MD5sum: 501a30fa94bd536f4a3e80ed021d33cf SHA1: ba07a6a7aaed70c25f6228a2e94227a4bbba845a SHA256: 9d3d7919ad02aa38d10712f4d9429d8254ea57e5dca8b81b7cd910ab6af5484f Description: asterisk PBX sound files - English/g722 Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in English (US, by Allison Smith) in raw G.722 format (mildly compressed wide-band codec). Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-en-gsm Priority: extra Section: comm Installed-Size: 2988 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Replaces: asterisk-sounds-main Provides: asterisk-prompt-en, asterisk-prompt-en-us Conflicts: asterisk-sounds-main Filename: ./asterisk-core-sounds/asterisk-core-sounds-en-gsm_1.4.21-1.8944_all.deb Size: 1806474 MD5sum: 41344e2d3e2895614a8090210452eb3b SHA1: d59792d1461b23263fef3fd93d2b1f832578e377 SHA256: 68675985bc4193a3b774b86e380a35ef40193cd383b581b7bdb25e579b49bd1b Description: asterisk PBX sound files - English/gsm Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in English (US, by Allison Smith) in raw gsm-fr format (Compressed. Takes relatively little space. playable with sox). . This package also provides the 'en' and 'en_US' sound directories through alternatives and hence is required by packages of other formats. Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-en-wav Priority: extra Section: comm Installed-Size: 19220 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-en-gsm | asterisk-sounds-main (>= 1.6.2.6) Filename: ./asterisk-core-sounds/asterisk-core-sounds-en-wav_1.4.21-1.8944_all.deb Size: 15338604 MD5sum: 04967c12f2c2edd405c52633c0109a38 SHA1: 9136ee8e3a51850af89a76d8da8d1ade1d58e4c6 SHA256: e284d880d0410fd8a83df91ffd5ea5b2ce374f3771fbbf29f5edbb4481c195af Description: asterisk PBX sound files - English/wav Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in English (US, by Allison Smith) in WAV format (8Khz, mono). Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-es-g722 Priority: extra Section: comm Installed-Size: 13356 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-es-gsm Filename: ./asterisk-core-sounds/asterisk-core-sounds-es-g722_1.4.21-1.8944_all.deb Size: 11147060 MD5sum: 61106fc50be0a72d57972a9fb61f7258 SHA1: a37e000cdf21dbb5ebd552be7b085b87257f1a87 SHA256: b6d7f473cc0773a403c68ff68a2201cef2962c88f8253b4f87ca22381eaa404d Description: asterisk PBX sound files - Spanish/g722 Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in Spanish (US, by Allison Smith) in raw G.722 format (mildly compressed wide-band codec). Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-es-gsm Priority: extra Section: comm Installed-Size: 3716 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Provides: asterisk-prompt-es, asterisk-prompt-es-mx Filename: ./asterisk-core-sounds/asterisk-core-sounds-es-gsm_1.4.21-1.8944_all.deb Size: 2500526 MD5sum: d854eb0f93f5b0454f4f3cdbd522b511 SHA1: 26bc2c9f3d0cee91bbf254241388597960158329 SHA256: ab8cc176d8943e085d00ce15e85554bd573c98b5861e3b9337bb27bf95f4d212 Description: asterisk PBX sound files - Spanish/gsm Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in Spanish (US, by Allison Smith) in raw gsm-fr format (Compressed. Takes relatively little space. playable with sox). . This package also provides the 'es' and 'es_MX' sound directories through alternatives and hence is required by packages of other formats. Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-es-wav Priority: extra Section: comm Installed-Size: 25964 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-es-gsm Filename: ./asterisk-core-sounds/asterisk-core-sounds-es-wav_1.4.21-1.8944_all.deb Size: 21628720 MD5sum: 11fe7a4d9ec0885fb8d8b819a704b4b8 SHA1: 9e913c33151dc1a8d7de8e40b78c9af37c14ec7f SHA256: 57be2a8d4e334a84a0ed2b00485e6b8ddec9764723ad25c7fbe1c607c3de3e72 Description: asterisk PBX sound files - Spanish/wav Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in Spanish (US, by Allison Smith) in WAV format (8Khz, mono). Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-fr-g722 Priority: extra Section: comm Installed-Size: 10648 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-fr-gsm Filename: ./asterisk-core-sounds/asterisk-core-sounds-fr-g722_1.4.21-1.8944_all.deb Size: 8609638 MD5sum: 1a86f7c16d2490837d5e00849dba086a SHA1: 17c5096794a8e7781ab8d5c99938050864ee47ae SHA256: a29a7a86982649770d55ba13a375723eb75ac3eb597a531bc5449ec8f41a26de Description: asterisk PBX sound files - French/g722 Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in French (Canada, by June Wallack) in raw G.722 format (mildly compressed wide-band codec). Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-fr-gsm Priority: extra Section: comm Installed-Size: 3128 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Provides: asterisk-prompt-fr, asterisk-prompt-fr-ca Filename: ./asterisk-core-sounds/asterisk-core-sounds-fr-gsm_1.4.21-1.8944_all.deb Size: 1916740 MD5sum: cea812e6aa4b808e2928ac94921626bc SHA1: ce7e9aab0fc430d4c330e5aa012ef521d05ea51c SHA256: 7576940318fee378f6d05c24b74ef1daf0381f373872fccef96d34282d547e7c Description: asterisk PBX sound files - French/gsm Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in French (Canada, by June Wallack) in raw gsm-fr format (Compressed. Takes relatively little space. playable with sox). . This package also provides the 'fr' and 'fr_CA' sound directories through alternatives and hence is required by packages of other formats. Homepage: http://www.asterisk.org/ Package: asterisk-core-sounds-fr-wav Priority: extra Section: comm Installed-Size: 20528 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-core-sounds Version: 1.4.21-1.8944 Recommends: asterisk-core-sounds-fr-gsm Filename: ./asterisk-core-sounds/asterisk-core-sounds-fr-wav_1.4.21-1.8944_all.deb Size: 15886918 MD5sum: 8afe6ebe8f1443aeaf50d3151bbca99a SHA1: 65f6a35ec85e2d3ee8cdd05c9299783bd2fa5a7f SHA256: 7c0707a8ec7358dbba9bda8e1542adeff801a549f8faf87cbad9d7d2a4d7798c Description: asterisk PBX sound files - French/wav Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the core part of that collection in French (Canada, by June Wallack) in WAV format (8Khz, mono). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-en-g722 Priority: extra Section: comm Installed-Size: 18788 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-en-g722_1.4.11-0.8516_all.deb Size: 14252378 MD5sum: f8dc4c1d7873aadf1b49085fb4a0daf9 SHA1: 042ff2cdd8739814de5b1419a94a3053a300c1c5 SHA256: b25262ef1a1e298f38699c0e1d3e803b056568eaddd2b8a2f302a8336cca5274 Description: asterisk extra sound files - English/g722 Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in English (US, by Allison Smith) in raw G.722 format (mildly compressed wide-band codec). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-en-gsm Priority: extra Section: comm Installed-Size: 6380 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-en-gsm_1.4.11-0.8516_all.deb Size: 3392174 MD5sum: b5fcac9d88ebe5b0e86a69b66f6e7f41 SHA1: e3998b91e29375a4c7950d25a4889186a66f7e2a SHA256: e767a7bfcec989a252f3815f6bd8481a8af0c0b88310ca06e5fcafe885d952a8 Description: asterisk extra sound files - English/gsm Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in English (US, by Allison Smith) in raw gsm-fr format (Compressed. Takes relatively little space. playable with sox). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-en-wav Priority: extra Section: comm Installed-Size: 35152 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-en-wav_1.4.11-0.8516_all.deb Size: 27985150 MD5sum: 6524fc067f71ca8dbbe99e784f27d387 SHA1: 6630f1ffba13485fa317dae2ebc1305dc08b7481 SHA256: ca5202bc9706537f4b0d06ad44ab289e346cb1ed36d8e88067e00447d1da674c Description: asterisk extra sound files - English/wav Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in English (US, by Allison Smith) in WAV format (8Khz, mono). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-fr-g722 Priority: extra Section: comm Installed-Size: 17016 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-fr-g722_1.4.11-0.8516_all.deb Size: 13033982 MD5sum: 7122c8a8d5ec48625d4049e59f2bdcf8 SHA1: ee0015d8a3e9e7bc4efbc63e68bc24f04f5ea4e7 SHA256: 0c4ad63fc4a9fa8ebe40b98c5c74a72c6159f6d8961433082b148d599f89e2e1 Description: asterisk extra sound files - French/g722 Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in French (Canada, by June Wallack) in raw G.722 format (mildly compressed wide-band codec). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-fr-gsm Priority: extra Section: comm Installed-Size: 5560 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-fr-gsm_1.4.11-0.8516_all.deb Size: 2968588 MD5sum: 6ce96aa37235f629ef95a11442098d77 SHA1: eaea1fa5d4e4647556fb420b145a116a1800646b SHA256: 73f5b0ac5c561646cbfd6b5f9872949896c83ab55ce82fc00d883ec782fbcbd6 Description: asterisk extra sound files - French/gsm Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in French (Canada, by June Wallack) in raw gsm-fr format (Compressed. Takes relatively little space. playable with sox). Homepage: http://www.asterisk.org/ Package: asterisk-extra-sounds-fr-wav Priority: extra Section: comm Installed-Size: 31968 Maintainer: Debian VoIP Team Architecture: all Source: asterisk-extra-sounds Version: 1.4.11-0.8516 Filename: ./asterisk-extra-sounds/asterisk-extra-sounds-fr-wav_1.4.11-0.8516_all.deb Size: 23858346 MD5sum: 759b2743c4e9b1118bc5544f117be92f SHA1: f80c90850900415e374c0878f6ac5494c8cf18d9 SHA256: 2d7bca75fc525c7c1e1e9c10db8eadef76cc3d3d8183bbe1ad322e0a0aa7083c Description: asterisk extra sound files - French/wav Asterisk is an Open Source PBX and telephony toolkit. It is, in a sense, middleware between Internet and telephony channels on the bottom, and Internet and telephony applications at the top. . Asterisk includes a set of standard sound files in various formats. This package contains the extra part of that collection in French (Canada, by June Wallack) in WAV format (8Khz, mono). Homepage: http://www.asterisk.org/ Package: ffado-mixer-qt4 Priority: optional Section: sound Installed-Size: 1844 Maintainer: Debian Multimedia Maintainers Architecture: all Source: libffado Version: 2.0.99+svn1985-2 Depends: ffado-dbus-server (>= 2.0.99+svn1985-2), ffado-tools (>= 2.0.99+svn1985-2), python, python-support (>= 0.90.0), python-dbus, python-qt4, python-qt4-dbus Filename: ./libffado/ffado-mixer-qt4_2.0.99+svn1985-2_all.deb Size: 107176 MD5sum: 2ed92ed64f405530593cf98106a35307 SHA1: 00494d5dcaab8d5f08ce1355cde6be3cb320a4c3 SHA256: d5a4697655649dc0999c4167cca24299dce05649652ed57670b53ebdebedc3cc Description: FFADO D-Bus mixer applets (QT4) FFADO is a Linux driver for FireWire (IEEE1394) audio devices. . The FFADO library permits discovering and configuring such devices and provides an API for streaming clients. . This package holds the mixer and control applications that communicate with ffado-dbus-server. (Qt4 version) Homepage: http://www.ffado.org Package: libffado-dev Priority: optional Section: libdevel Installed-Size: 92 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libffado Version: 2.0.99+svn1985-2 Depends: libffado2 (= 2.0.99+svn1985-2), libxml2-dev Filename: ./libffado/libffado-dev_2.0.99+svn1985-2_i386.deb Size: 18692 MD5sum: 3cb4e6265817a7ef6be2b935f7c5c98d SHA1: 0cfa650b4443a41480fee76c23010070871f7fb6 SHA256: 40e3b84dc6a5edaf14bf8d1a4e17c5112dc404f42858cd010b0797e714a71732 Description: FFADO API - development files FFADO is a Linux driver for FireWire (IEEE1394) audio devices. . The FFADO library permits discovering and configuring such devices and provides an API for streaming clients. . This package holds the development files. Homepage: http://www.ffado.org Package: libffado2 Priority: optional Section: libs Installed-Size: 4160 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libffado Version: 2.0.99+svn1985-2 Depends: libc6 (>= 2.3.6-6~), libconfig++8, libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libglibmm-2.4-1c2a (>= 2.24.0), libiec61883-0 (>= 1.2.0), libraw1394-11, libsigc++-2.0-0c2a (>= 2.0.2), libstdc++6 (>= 4.4.0), libxml++2.6-2 (>= 2.24.0), libxml2 (>= 2.6.27) Filename: ./libffado/libffado2_2.0.99+svn1985-2_i386.deb Size: 1490340 MD5sum: 3f224cac5f10095f8227cd49af7dc491 SHA1: ea9765a3149d556709918177e5c53c29ec40b70e SHA256: 3e00a050ef42ce9a99106d2b5b88d641ff936967e3eb24b1df22e1da33e18bc5 Description: FFADO API FFADO is a Linux driver for FireWire (IEEE1394) audio devices. . The FFADO library permits discovering and configuring such devices and provides an API for streaming clients. . This package holds the shared library. Homepage: http://www.ffado.org Package: ffado-tools Priority: optional Section: sound Installed-Size: 220 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libffado Version: 2.0.99+svn1985-2 Replaces: ffado-mixer-qt4 (<< 2.0.1+svn1856-2~) Depends: libffado2 (= 2.0.99+svn1985-2), dbus (>= 1.0.0), python, libasound2 (>> 1.0.18), libc6 (>= 2.3.6-6~), libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libglibmm-2.4-1c2a (>= 2.24.0), libiec61883-0 (>= 1.2.0), libraw1394-11, libsigc++-2.0-0c2a (>= 2.0.2), libstdc++6 (>= 4.4.0), libxml++2.6-2 (>= 2.24.0), libxml2 (>= 2.6.27) Breaks: ffado-mixer-qt4 (<< 2.0.1+svn1856-2~) Filename: ./libffado/ffado-tools_2.0.99+svn1985-2_i386.deb Size: 60904 MD5sum: e60944e59637989523da88afacdf2d53 SHA1: 79bec6150863f54eee13136c4f798c7b7db6bb5e SHA256: 9940747ab04b028725a1d6ce8a0cd820d7c7a62f1ff60dc1cc955c0f295043c7 Description: FFADO debugging and firmware tools FFADO is a Linux driver for FireWire (IEEE1394) audio devices. . The FFADO library permits discovering and configuring such devices and provides an API for streaming clients. . This package holds the following tools for firmware updating, troubleshooting and debugging: * ffado-test-streaming * ffado-diag * ffado-test-isoxmit * ffado-test-isorecv * ffado-bridgeco-downloader * ffado-test * ffado-fireworks-downloader Homepage: http://www.ffado.org Package: ffado-dbus-server Priority: optional Section: sound Installed-Size: 232 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libffado Version: 2.0.99+svn1985-2 Depends: libffado2 (= 2.0.99+svn1985-2), dbus (>= 1.0.0), libc6 (>= 2.3.6-6~), libdbus-1-3 (>= 1.0.2), libdbus-c++-1-0, libgcc1 (>= 1:4.1.1), libglib2.0-0 (>= 2.12.0), libglibmm-2.4-1c2a (>= 2.24.0), libraw1394-11, libsigc++-2.0-0c2a (>= 2.0.2), libstdc++6 (>= 4.1.1), libxml++2.6-2 (>= 2.24.0), libxml2 (>= 2.6.27) Filename: ./libffado/ffado-dbus-server_2.0.99+svn1985-2_i386.deb Size: 66994 MD5sum: a8e8066ecb005b27665c077a6b3782da SHA1: dd241b3b57dff386d83af05f120edceb032463fb SHA256: 897f028dcafebf8e145b574f086fd45d6e516bd70963cafce7c4583130dd9a8e Description: FFADO D-Bus server FFADO is a Linux driver for FireWire (IEEE1394) audio devices. . The FFADO library permits discovering and configuring such devices and provides an API for streaming clients. . This package holds the D-Bus server that exposes the mixer and control interfaces through D-Bus. Homepage: http://www.ffado.org Package: libnl3-doc Priority: optional Section: doc Installed-Size: 15604 Maintainer: Heiko Stuebner Architecture: all Source: libnl3 Version: 3.0-1.1 Suggests: doc-base Filename: ./libnl3/libnl3-doc_3.0-1.1_all.deb Size: 4663622 MD5sum: 5f4ac5f33a557d84ce282cd17bc7e172 SHA1: 51ee49227cd53dfac23397b4b1b948e509daba03 SHA256: 17901293247230ad2ea8e9659210e3699106e548d4b39290f248d57598b68cc5 Description: API documentation for libnl3 This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . This package contains the API reference documentation for libnl3. Homepage: http://people.suug.ch/~tgr/libnl/ Package: libnl3 Priority: optional Section: libs Installed-Size: 424 Maintainer: Heiko Stuebner Architecture: i386 Version: 3.0-1.1 Depends: libc6 (>= 2.3) Filename: ./libnl3/libnl3_3.0-1.1_i386.deb Size: 166998 MD5sum: 3374e13e299948cb50ccd85dfdf17efa SHA1: 018f3e70fa51c01cc9d431606a1012b3ea5c310c SHA256: 237a965765ddff4ea01ddc4a6cfa6f06f7b3c54307c2e1d7cd2e0b3f02a5a2a5 Description: library for dealing with netlink sockets This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. Homepage: http://people.suug.ch/~tgr/libnl/ Package: libnl3-dev Priority: optional Section: libdevel Installed-Size: 456 Maintainer: Heiko Stuebner Architecture: i386 Source: libnl3 Version: 3.0-1.1 Depends: libnl3 (= 3.0-1.1) Suggests: libnl3-doc Conflicts: libnl-dev, libnl2-dev Filename: ./libnl3/libnl3-dev_3.0-1.1_i386.deb Size: 44020 MD5sum: 2f5465acf51414d98614941a5293310e SHA1: 66e7287eaab964a2a6bffbbc7b670467c1685f80 SHA256: 540cb5f104d841b082c2881bbf60c3a59be72aefd842ed1419bb00b33a1e677b Description: development library and headers for libnl3 This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . This package contains all files that are needed to build applications using libnl3. Homepage: http://people.suug.ch/~tgr/libnl/ Package: libnl3-dbg Priority: extra Section: debug Installed-Size: 1124 Maintainer: Heiko Stuebner Architecture: i386 Source: libnl3 Version: 3.0-1.1 Depends: libnl3 (= 3.0-1.1) Filename: ./libnl3/libnl3-dbg_3.0-1.1_i386.deb Size: 371366 MD5sum: 9213014202034f27b55c1e68139c872f SHA1: 3155efb46d81c94fb703cd5fcd20f5a5e781b584 SHA256: 039695de93b98acc6be4e5a1c64c5c43667cc31cb6946c3c486389d8b4e0a63e Description: debug symbols for libnl3 This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . This package contains unstripped shared libraries. It is provided primarily to provide a backtrace with names in a debugger, this makes it somewhat easier to interpret core dumps. The libraries are installed in /usr/lib/debug and are automatically used by gdb. Homepage: http://people.suug.ch/~tgr/libnl/ Package: libnl3-udeb Priority: optional Section: debian-installer Installed-Size: 104 Maintainer: Heiko Stuebner Architecture: i386 Source: libnl3 Version: 3.0-1.1 Depends: libc6-udeb (>= 2.11) Filename: ./libnl3/libnl3-udeb_3.0-1.1_i386.udeb Size: 39178 MD5sum: 5bcd9f362e2b164799b10058ca4b5ba9 SHA1: f5de475e0057c525907ba23a0ad17b590240efd9 SHA256: 54c448d7c755219a127abf81314e2633c77f2622434d147ef7cc01f66d650170 Description: library for dealing with netlink sockets This is a library for applications dealing with netlink sockets. The library provides an interface for raw netlink messaging and various netlink family specific interfaces. . This package is a udeb. It's only usefull inside of debian-installer. Package: minidlna Priority: optional Section: net Installed-Size: 372 Maintainer: Benoît Knecht Architecture: i386 Version: 1.0.21+dfsg-1 Depends: libavformat52 (>= 4:0.5.1-1) | libavformat-extra-52 (>= 4:0.5.1-1), libavutil49 (>= 4:0.5.1-1) | libavutil-extra-49 (>= 4:0.5.1-1), libc6 (>= 2.4), libexif12, libflac8 (>= 1.2.1), libid3tag0 (>= 0.15.1b), libjpeg62 (>= 6b1), libogg0 (>= 1.0rc3), libsqlite3-0 (>= 3.7.3), libvorbis0a (>= 1.1.2), adduser (>= 3.11), mawk | gawk Filename: ./minidlna/minidlna_1.0.21+dfsg-1_i386.deb Size: 132878 MD5sum: 2860296f3d25668884eddb46be28ac17 SHA1: 324c0ccfa597e2a10c1c1b605504409ba2931b26 SHA256: 09f8ffc3c38da5585d608c55c8196683915d4840ed4f091a41bf91ef10dd1636 Description: lightweight DLNA/UPnP-AV server targeted at embedded systems MiniDLNA (aka ReadyDLNA) is server software with the aim of being fully compliant with DLNA/UPnP-AV clients. . The minidlna daemon serves media files (music, pictures, and video) to clients on your network. Example clients include applications such as totem and xbmc, and devices such as portable media players, smartphones, and televisions. . MiniDLNA is a simple, lightweight alternative to mediatomb, but has fewer features. It does not have a web interface for administration and must be configured by editing a text file. Homepage: http://sourceforge.net/projects/minidlna/ Package: nginx Priority: optional Section: httpd Installed-Size: 81 Maintainer: Kartik Mistry Architecture: all Version: 1.1.17-2 Depends: nginx-full | nginx-light Filename: ./nginx/nginx_1.1.17-2_all.deb Size: 57132 MD5sum: 3df1c9d95feeff8738c8c043226b9475 SHA1: 4ed0681ba061ecef5c08ef1f5b3b4d620eab4055 SHA256: 65014bf72187d995dd882b076ff4bf26f53a6e4b06b420dc04e37bd8b08f5655 Description: small, but very powerful and efficient web server and mail proxy Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This is a dummy package that selects nginx-full by default, but also can be installed with nginx-light for upgrading to nginx-light directly. Homepage: http://nginx.net Package: nginx-doc Priority: optional Section: doc Installed-Size: 105 Maintainer: Kartik Mistry Architecture: all Source: nginx Version: 1.1.17-2 Depends: lsb-base (>= 3.2-14) Filename: ./nginx/nginx-doc_1.1.17-2_all.deb Size: 71242 MD5sum: 222e17b0f5e8f310686c4beda60af4fd SHA1: 047c68814f66eac7b20266fde9da8bc83c692234 SHA256: 881c8814e17aaa6fdcd13310b5fd3a3646d61d1706e050e12b657ba87802523c Description: small, but very powerful and efficient web server (documentation) Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides extra documentation to help unleash the power of Nginx. Homepage: http://nginx.net Package: nginx-common Priority: optional Section: httpd Installed-Size: 191 Maintainer: Kartik Mistry Architecture: all Source: nginx Version: 1.1.17-2 Replaces: nginx (<< 0.8.54-4), nginx-extras (<< 0.8.54-4), nginx-full (<< 0.8.54-4), nginx-light (<< 0.8.54-4) Depends: lsb-base (>= 3.2-14) Breaks: nginx (<< 0.8.54-4), nginx-extras (<< 0.8.54-4), nginx-full (<< 0.8.54-4), nginx-light (<< 0.8.54-4) Filename: ./nginx/nginx-common_1.1.17-2_all.deb Size: 67006 MD5sum: 7d2f8f22756326d00cd08877102f0e1c SHA1: fa97f82f3228087d347fe501a9875f06174b331d SHA256: c0317ba13c3a3084e88265c93238778d517dbff6944f4deb2bc845fa4a30184d Description: small, but very powerful and efficient web server (common files) Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package contains base configuration files used across multiple packaged versions of Nginx (nginx-full, nginx-light, nginx-extras). Homepage: http://nginx.net Package: nginx-full Priority: optional Section: httpd Installed-Size: 780 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Provides: httpd, nginx Depends: nginx-common (= 1.1.17-2), libc6 (>= 2.10), libgd2-noxpm (>= 2.0.36~rc1~dfsg) | libgd2-xpm (>= 2.0.36~rc1~dfsg), libgeoip1 (>= 1.4.7~beta6+dfsg), libpam0g (>= 0.99.7.1), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8m-1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4) Conflicts: nginx-extras, nginx-light Filename: ./nginx/nginx-full_1.1.17-2_i386.deb Size: 397474 MD5sum: d4224413ac8d2fc92df8088591db77a0 SHA1: dcceab6581b703c05a3e158479da6f0ebe5f9177 SHA256: 9101a7d4233b5b59c61a7234f0755a935d0672ef9e88729bc8b96ddfd4422914 Description: nginx web server with full set of core modules Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . It can also act as a POP3/IMAP mail proxy with SSL and TLS SNI support. This package has the standard set of modules enabled. . MODULES INCLUDED: Standard HTTP Modules: Core, Access, Auth Basic, Auto Index, Browser, Charset, Empty GIF, FastCGI, Geo, Gzip, Headers, Index, Limit Requests, Limit Zone, Log, Map, Memcached, Proxy, Referer, Rewrite, SCGI, Split Clients, SSI, Upstream, User ID, UWSGI Optional HTTP Modules: Addition, Debug, GeoIP, Gzip Precompression, HTTP Sub, Image Filter, IPv6, RealIP, Stub Status, WebDAV, XSLT Mail Modules: Mail Core, IMAP, POP3, SMTP, SSL Third Party Modules: Echo, Upstream Fair Queue Homepage: http://nginx.net Package: nginx-full-dbg Priority: extra Section: debug Installed-Size: 5200 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Depends: nginx-full (= 1.1.17-2) Conflicts: nginx-extras-dbg, nginx-light-dbg Filename: ./nginx/nginx-full-dbg_1.1.17-2_i386.deb Size: 2526220 MD5sum: 712da13872c888b176aed650628ed325 SHA1: 8c574c8a26eaad4cd19d9aabc7acc72733f8decb SHA256: 4233f65d5ad341ce43947ac1f407b0397bcfa261166a400f82c894c675785a05 Description: Debugging symbols for nginx (full) Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides debugging symbols for nginx-full, to assist in debugging issues that you may find. It should not be required for normal operation. Homepage: http://nginx.net Package: nginx-light Priority: extra Section: httpd Installed-Size: 546 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Provides: httpd, nginx Depends: nginx-common (= 1.1.17-2), libc6 (>= 2.10), libpcre3 (>= 7.7), libssl0.9.8 (>= 0.9.8m-1), zlib1g (>= 1:1.1.4) Conflicts: nginx-extras, nginx-full Filename: ./nginx/nginx-light_1.1.17-2_i386.deb Size: 293058 MD5sum: 8c1c56ec9fdc07bd9a812f71d1ab3e5e SHA1: 217fafb273a49ae744b7591439edc17d12e414c3 SHA256: 789df610b214f88bca18232ecd445d1d3fd274a0e2321bc361289dfe3ef4392c Description: nginx web server with minimal set of core modules Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides a very light version of Nginx which lacks many of the features and modules of it's full counterpart. . MODULES INCLUDED: Standard HTTP Modules: Core, Access, Auth Basic, Auto Index, Charset, Empty GIF, FastCGI, Gzip, Headers, Index, Log, Map, Proxy, Rewrite, Split Clients, Upstream, User ID Optional HTTP Modules: Gzip Precompression, IPv6, Stub Status Mail Modules: None Third Party Modules: Echo Homepage: http://nginx.net Package: nginx-light-dbg Priority: extra Section: debug Installed-Size: 3647 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Depends: nginx-light (= 1.1.17-2) Conflicts: nginx-extras-dbg, nginx-full-dbg Filename: ./nginx/nginx-light-dbg_1.1.17-2_i386.deb Size: 1798024 MD5sum: 006c7f3ea301338eabf0056f6b83bd6a SHA1: 7b1b9f722786f7ce4fff87227b1db9fc2f285161 SHA256: 2e5f4ec8614fdec4984fbe956ec283c5b0a6c2a9a473738f0c7df7ed937be70d Description: Debugging symbols for nginx (light) Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides debugging symbols for nginx-light, to assist in debugging issues that you may find. It should not be required for normal operation. Homepage: http://nginx.net Package: nginx-extras Priority: extra Section: httpd Installed-Size: 1108 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Provides: httpd, nginx Depends: nginx-common (= 1.1.17-2), perl (>= 5.10.1-17squeeze3), perlapi-5.10.1, libc6 (>= 2.11), libgd2-noxpm (>= 2.0.36~rc1~dfsg) | libgd2-xpm (>= 2.0.36~rc1~dfsg), libgeoip1 (>= 1.4.7~beta6+dfsg), liblua5.1-0, libpam0g (>= 0.99.7.1), libpcre3 (>= 7.7), libperl5.10 (>= 5.10.1), libssl0.9.8 (>= 0.9.8m-1), libxml2 (>= 2.7.4), libxslt1.1 (>= 1.1.25), zlib1g (>= 1:1.1.4) Conflicts: nginx-full, nginx-light Filename: ./nginx/nginx-extras_1.1.17-2_i386.deb Size: 538890 MD5sum: fa3d6810b16ee5dad291395838ae1712 SHA1: f8852de310cc2881cb5919acd628ec12f7857e83 SHA256: cff4a22d1adb38c01e7e57e56896844dd4fbb7fbe6aa6621ef4703d03aefe87f Description: nginx web server with full set of core modules and extras Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides the standard version of Nginx. It also includes extra features and modules such as the perl module which allows the addition of perl in configuration files. . MODULES INCLUDED: Standard HTTP Modules: Core, Access, Auth Basic, Auto Index, Browser, Charset, Empty GIF, FastCGI, Geo, Gzip, Headers, Index, Limit Requests, Limit Zone, Log, Map, Memcached, Proxy, Referer, Rewrite, SCGI, Split Clients, SSI, Upstream, User ID, UWSGI Optional HTTP Modules: Addition, Debug, WebDAV, Flash Streaming Video, GeoIP, Gzip Precompression, HTTP Sub, Image Filter, MP4, RealIP, Stub Status, SSL, XSLT, IPv6, Embedded Perl, Secure Link, Random Index Mail Modules: Mail Core, POP3, IMAP, SMTP, SSL Third Party Modules: Echo, Embedded Lua, http push, Nginx Development Kit, Upload module, Upload Progress, HttpHeadersMore, Upstream Fair Queue, Chunkin, Auth PAM Homepage: http://nginx.net Package: nginx-extras-dbg Priority: extra Section: debug Installed-Size: 7505 Maintainer: Kartik Mistry Architecture: i386 Source: nginx Version: 1.1.17-2 Depends: nginx-extras (= 1.1.17-2) Conflicts: nginx-full-dbg, nginx-light-dbg Filename: ./nginx/nginx-extras-dbg_1.1.17-2_i386.deb Size: 3726216 MD5sum: 18983b42f07867f564e144ba5a7742fc SHA1: 927bef8b3efa2213a575970a291fe581470b39a9 SHA256: 68e61151bb433e427a9144a3a3a6b5c3fa3ae4590bb2659f46c0a7fd074266d0 Description: Debugging symbols for nginx (extras) Nginx (engine x) is a web server created by Igor Sysoev and kindly provided to the open-source community. This server can be used as standalone HTTP server and as a reverse proxy server before some Apache or another big server to reduce load to backend servers by many concurrent HTTP-sessions. . This package provides debugging symbols for nginx-extras, to assist in debugging issues that you may find. It should not be required for normal operation. Homepage: http://nginx.net Package: lame Priority: optional Section: sound Installed-Size: 249 Maintainer: Debian multimedia packages maintainers Architecture: i386 Version: 3.98.4+repack2-3~bpo60+1 Depends: libc6 (>= 2.3), libmp3lame0, libncurses5 (>= 5.7+20100313) Filename: ./lame/lame_3.98.4+repack2-3~bpo60+1_i386.deb Size: 168816 MD5sum: ca419b11a8816e93dd105ab1655242dd SHA1: 900c06415a466b4a8b0fb1e21ccbce487ef53822 SHA256: eceb2d17f57f14bdd47c767a199e79ed811186c7873e41dfa7889eff44690b79 Description: MP3 encoding library (frontend) LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the frontend. Homepage: http://lame.sourceforge.net/ Package: lame-doc Priority: optional Section: doc Installed-Size: 321 Maintainer: Debian multimedia packages maintainers Architecture: all Source: lame Version: 3.98.4+repack2-3~bpo60+1 Filename: ./lame/lame-doc_3.98.4+repack2-3~bpo60+1_all.deb Size: 172802 MD5sum: ac14355115d4a54c60084882b55dac08 SHA1: 9b86f61fa9f9ac4eaf0c068e7203076db20858ee SHA256: a38ad88b96ee91021ff5ec1ead38097d8c1819539368dd92c30cb1afe8988f95 Description: MP3 encoding library (documentation) LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the documentation. Homepage: http://lame.sourceforge.net/ Package: libmp3lame0 Priority: optional Section: libs Installed-Size: 469 Maintainer: Debian multimedia packages maintainers Architecture: i386 Source: lame Version: 3.98.4+repack2-3~bpo60+1 Replaces: liblame0 Depends: libc6 (>= 2.3) Conflicts: liblame0 Filename: ./lame/libmp3lame0_3.98.4+repack2-3~bpo60+1_i386.deb Size: 271360 MD5sum: baa57ec43596db071091b3871ceabad7 SHA1: 9b74e34639619e68a74d82aac6ac9d451782d3cf SHA256: 39f04ae8a72eb78d4e0af38543bfa87159590b94f13b00eb4bf1fa72f950b5f2 Description: MP3 encoding library LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the shared library. Homepage: http://lame.sourceforge.net/ Package: libmp3lame-dev Priority: optional Section: libdevel Installed-Size: 579 Maintainer: Debian multimedia packages maintainers Architecture: i386 Source: lame Version: 3.98.4+repack2-3~bpo60+1 Depends: libmp3lame0 (= 3.98.4+repack2-3~bpo60+1) Filename: ./lame/libmp3lame-dev_3.98.4+repack2-3~bpo60+1_i386.deb Size: 296798 MD5sum: 6c175a06e08cebf992144ebb3e8266e2 SHA1: 5f26b22126ac781837dcbf144180a3e4b2461574 SHA256: 2010efa14ca3030614ca246a2eabea6c0fc1eb9b9f44571fc14e5134876101fd Description: MP3 encoding library (development) LAME (LAME Ain't an MP3 Encoder) is a research project for learning about and improving MP3 encoding technology. LAME includes an MP3 encoding library, a simple frontend application, and other tools for sound analysis, as well as convenience tools. . This package contains the development files. Homepage: http://lame.sourceforge.net/ Package: x264 Priority: optional Section: graphics Installed-Size: 192 Maintainer: Debian Multimedia Maintainers Architecture: i386 Version: 2:0.120.2151+gita3f4407-3~bpo60+1 Depends: libc6 (>= 2.7), libx264-120 Filename: ./x264/x264_0.120.2151+gita3f4407-3~bpo60+1_i386.deb Size: 71812 MD5sum: 2844da6181a16dad1fccd42d417fe554 SHA1: e469c0fdb8b18722b2e91a4fbfa2a9dc658705d4 SHA256: a8ad46687a1f5c668d7b7f2f4513a45eb831b7fe660f6f0809f2f8a987e8c87b Description: video encoder for the H.264/MPEG-4 AVC standard x264 is an advanced commandline encoder for creating H.264 (MPEG-4 AVC) video streams. . x264 supports the following features: * CABAC (context-based adaptive binary arithmetic coding) and CAVLC (context-based adaptive variable length coding * multiple reference frames * 16x16, 8x8 and 4x4 intra-predicted macroblocks * all P-frame inter-predicted macroblock types * B-Inter-predicted macroblock types from 16x16 down to 8x8 * rate distortion optimization * multiple rate control modes (constant quantizer, constant quality, single or multipass ABR with the option of VBV) * scene cut detection * adaptive B-frame placement, with the option of keeping B-frames as references / arbitrary frame order * 8x8 and 4x4 adaptive spatial transform (high profile) * lossless mode (high 4:4:4 profile) * custom quantization matrices (high profile) * parallel encoding on multiple CPUs * interlaced streams Homepage: http://www.videolan.org/developers/x264.html Package: libx264-120 Priority: optional Section: libs Installed-Size: 2208 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: x264 Version: 2:0.120.2151+gita3f4407-3~bpo60+1 Depends: libc6 (>= 2.7) Filename: ./x264/libx264-120_0.120.2151+gita3f4407-3~bpo60+1_i386.deb Size: 825520 MD5sum: a750a532f96c16938a1241b870e0210d SHA1: ed6e02eeee58261e25384fb7a308662337ca99be SHA256: 4f6900468cce8bb1263d2221b0215e8e44873232b7414ef97b585c58e7498137 Description: x264 video coding library libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC) video streams. . This package contains the libx264 shared library. Homepage: http://www.videolan.org/developers/x264.html Package: libx264-dev Priority: optional Section: libdevel Installed-Size: 1432 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: x264 Version: 2:0.120.2151+gita3f4407-3~bpo60+1 Depends: libx264-120 (= 2:0.120.2151+gita3f4407-3~bpo60+1) Filename: ./x264/libx264-dev_0.120.2151+gita3f4407-3~bpo60+1_i386.deb Size: 500824 MD5sum: f0cea78a829db5e46cc3ab34a0a7dfc3 SHA1: 6c8b2a6ee8ee513bfb73a41a08022680ba30176f SHA256: b8a5a23e228e4be3bb36a91038c3ba0d033880219f95499234367f68491e27cb Description: development files for libx264 libx264 is an advanced encoding library for creating H.264 (MPEG-4 AVC) video streams. . This package contains the static library and headers used to build programs that use libx264. Homepage: http://www.videolan.org/developers/x264.html Package: libxvidcore4 Priority: optional Section: libs Installed-Size: 976 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: xvidcore Version: 2:1.3.2-5~bpo60+1 Depends: libc6 (>= 2.7) Filename: ./xvidcore/libxvidcore4_1.3.2-5~bpo60+1_i386.deb Size: 316356 MD5sum: 0d056c74ab9dd1141d8d86ac1542afa2 SHA1: 5d0eeefe52b41d080019f23c3bcff3c5426c65ba SHA256: ef420093107c5a80397123849016e8b092a8846f3e8b98b94ac31a031fe0170b Description: Open source MPEG-4 video codec (library) Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards. It is written in C with assembler optimizations for quality and speed (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is especially optimized towards offline, multi-pass compression for storage and archival purposes. . This package contains the shared library. Homepage: http://www.xvid.org/ Package: libxvidcore-dev Priority: optional Section: libdevel Installed-Size: 1188 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: xvidcore Version: 2:1.3.2-5~bpo60+1 Depends: libxvidcore4 (= 2:1.3.2-5~bpo60+1) Filename: ./xvidcore/libxvidcore-dev_1.3.2-5~bpo60+1_i386.deb Size: 376246 MD5sum: 1760a700a2ba07f9805d6e849ee27cb6 SHA1: 6760b85ebb64b36db04824e458c3a255ae196775 SHA256: 2fd5bc5063dab96b3bf5274126db3011821ce90e1e35d984b4ced67114f89465 Description: Open source MPEG-4 video codec (development) Xvid (formerly XviD) is an open source MPEG-4 video codec, implementing MPEG-4 Simple Profile, Advanced Simple Profile, and Advanced Video Coding standards. It is written in C with assembler optimizations for quality and speed (including MMX, SSE, and 3Dnow! code for i386 and AltiVec for PowerPC), and is especially optimized towards offline, multi-pass compression for storage and archival purposes. . This package contains the development files. Homepage: http://www.xvid.org/ Package: libav-tools Priority: optional Section: video Installed-Size: 1876 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Replaces: ffmpeg (<< 4:0.8~), libavcodec-extra-53 (<< 4:0.6~), libavcodec53 (<< 4:0.8-2~bpo60+1) Depends: libavcodec53 (>= 4:0.8-2~bpo60+1) | libavcodec-extra-53 (>= 4:0.8), libavcodec53 (<< 4:0.8-99) | libavcodec-extra-53 (<< 4:0.8.99), libavdevice53 (>= 4:0.8-2~bpo60+1) | libavdevice-extra-53 (>= 4:0.8), libavdevice53 (<< 4:0.8-99) | libavdevice-extra-53 (<< 4:0.8.99), libavfilter2 (>= 4:0.8-2~bpo60+1) | libavfilter-extra-2 (>= 4:0.8), libavfilter2 (<< 4:0.8-99) | libavfilter-extra-2 (<< 4:0.8.99), libavformat53 (>= 4:0.8-2~bpo60+1) | libavformat-extra-53 (>= 4:0.8), libavformat53 (<< 4:0.8-99) | libavformat-extra-53 (<< 4:0.8.99), libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.7), libpostproc52 (>= 4:0.8-2~bpo60+1) | libpostproc-extra-52 (>= 4:0.8), libpostproc52 (<< 4:0.8-99) | libpostproc-extra-52 (<< 4:0.8.99), libsdl1.2debian (>= 1.2.10-1), libswscale2 (>= 4:0.8-2~bpo60+1) | libswscale-extra-2 (>= 4:0.8), libswscale2 (<< 4:0.8-99) | libswscale-extra-2 (<< 4:0.8.99) Conflicts: ffprobe Breaks: ffmpeg (<< 4:0.8~) Filename: ./libav/libav-tools_0.8-2~bpo60+1_i386.deb Size: 640022 MD5sum: c106153cf05064a66220054e780899f6 SHA1: f2189862df8e1b2cd5d8530437f661e5bd32524a SHA256: dd4ab8c3c987478b28a0bf93ff0648ab11ff8eaebfa120212a483867578abf16 Description: Multimedia player, server, encoder and transcoder Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains the avplay multimedia player, the avserver streaming server, the avconv audio and video encoder, and the avprobe stream analyzer. They support most existing file formats (AVI, MPEG, OGG, Matroska, ASF...) and encoding formats (MPEG, DivX, MPEG4, AC3, DV...). Homepage: http://libav.org/ Package: ffmpeg Priority: extra Section: oldlibs Installed-Size: 68 Maintainer: Debian Multimedia Maintainers Architecture: all Source: libav Version: 4:0.8-2~bpo60+1 Depends: libav-tools Filename: ./libav/ffmpeg_0.8-2~bpo60+1_all.deb Size: 38834 MD5sum: fc4fdadc3e259dbba572a691f9c44430 SHA1: 04b80445234c904adc95b7c8bced0e1e779fb14d SHA256: f7c32350bdc8257901931a48d7b1bb38dd82c75e0e3594f05422b36ddded9bd7 Description: Multimedia player, server, encoder and transcoder (transitional package) Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package is only used for transitional purposes and can be safely removed when no other packages depend on this package. Homepage: http://libav.org/ Package: ffmpeg-dbg Priority: extra Section: oldlibs Installed-Size: 68 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libav-dbg Filename: ./libav/ffmpeg-dbg_0.8-2~bpo60+1_i386.deb Size: 38916 MD5sum: c28713c943293d7d4a1e966c4eda4aee SHA1: 60ef1ee699bbc17c8f8f8142992b386e1ccdb4ea SHA256: 8c4a4d3bb9104ca2608d04ab90f6695da00623f2a8c1b55f11eb6d3eb9043370 Description: Debug symbols for Libav related packages (transitional package) Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains debug data of the Libav related shared libraries. . Most people will not need this package. Please install it to produce useful stacktraces to help debugging the Libav libraries. . This package is only used for transitional purposes and can be safely removed. Homepage: http://libav.org/ Package: libav-dbg Priority: extra Section: debug Installed-Size: 43820 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libav-tools (= 4:0.8-2~bpo60+1), libavcodec53 (= 4:0.8-2~bpo60+1), libavdevice53 (= 4:0.8-2~bpo60+1), libavformat53 (= 4:0.8-2~bpo60+1), libavutil51 (= 4:0.8-2~bpo60+1), libpostproc52 (= 4:0.8-2~bpo60+1), libswscale2 (= 4:0.8-2~bpo60+1) Filename: ./libav/libav-dbg_0.8-2~bpo60+1_i386.deb Size: 17337110 MD5sum: 8db49f461c4a7bae9fbf9936d5f3d679 SHA1: 3e6f894f357063c02f57c0ce4606f83a3aac0846 SHA256: 7b075e34c74489babb4e32a2665ef36992fcc69559590554b20b338f9eb6452d Description: Debug symbols for Libav related packages Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains debug data of the Libav related shared libraries. . Most people will not need this package. Please install it to produce useful stacktraces to help debugging the Libav library. Homepage: http://libav.org/ Package: libav-source Priority: optional Section: devel Installed-Size: 26564 Maintainer: Debian Multimedia Maintainers Architecture: all Source: libav Version: 4:0.8-2~bpo60+1 Filename: ./libav/libav-source_0.8-2~bpo60+1_all.deb Size: 27057602 MD5sum: 589d7f5112a8f4bfc633732cbafe1e6f SHA1: 29e71949eaa4102839ff3ce8631011724a76e4ae SHA256: 1ef71e138c3bf6d953ed80c0d382f2c5d2ed3f19fd300dd7056bbe6d793b8f14 Description: Patched Libav sources Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains a tarball the source file that were used to produce this package, containing all modifications that have been applied inline. . This package is used as build-dependency for 'libav-extra', which provides the "extra" variants of libav. Homepage: http://libav.org/ Package: ffmpeg-doc Priority: extra Section: oldlibs Installed-Size: 68 Maintainer: Debian Multimedia Maintainers Architecture: all Source: libav Version: 4:0.8-2~bpo60+1 Depends: libav-doc Filename: ./libav/ffmpeg-doc_0.8-2~bpo60+1_all.deb Size: 38868 MD5sum: 85f0073292dd0af2c74edf8ecf03b96b SHA1: 9276f9079d8a740974eb035199aeebe0771827c1 SHA256: f55a8125457409ed532efc326c6d6f6f2cdd725e3fffe21965ecf47375920f72 Description: Documentation of the Libav API (transitional package) Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains the html doxygen documentation of the Libav API. . Only application developers will find this package useful. . This package is only used for transitional purposes and can be safely removed. Homepage: http://libav.org/ Package: libav-doc Priority: optional Section: doc Installed-Size: 151996 Maintainer: Debian Multimedia Maintainers Architecture: all Source: libav Version: 4:0.8-2~bpo60+1 Replaces: ffmpeg-doc (<< 4:0.8-2~bpo60+1) Breaks: ffmpeg-doc (<< 4:0.8-2~bpo60+1) Filename: ./libav/libav-doc_0.8-2~bpo60+1_all.deb Size: 21328290 MD5sum: 07f12f5e79000bf1c9bba6ac33656503 SHA1: e182d26c6cf04c6bfa2cf70e5295d637f3ea5747 SHA256: db0f19c4b42a7c8f5238f9da206a0c89178c38240b4a8989607523fc3a7779a5 Description: Documentation of the Libav API Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This package contains the html doxygen documentation of the Libav API. . Only application developers will find this package useful. Homepage: http://libav.org/ Package: libavutil51 Priority: optional Section: libs Installed-Size: 344 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libc6 (>= 2.3.6-6~) Filename: ./libav/libavutil51_0.8-2~bpo60+1_i386.deb Size: 156414 MD5sum: 135791420461111a085294840793a67d SHA1: 76723b4bf8bbce672a571acb9d61d24ad1654175 SHA256: 52172b5393bd866b21ee2b47145cb766a46e2e7f18e7f4ba335d17b01bb078f9 Description: Libav utility library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the common utility library from Libav. It contains shared code used by all other Libav libraries. Homepage: http://libav.org/ Package: libavcodec53 Priority: optional Section: libs Installed-Size: 15380 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.7), libdirac-encoder0, libgsm1 (>= 1.0.13), libmp3lame0, libopenjpeg2, libschroedinger-1.0-0 (>= 1.0.0), libspeex1 (>= 1.2~beta3-1), libtheora0 (>= 1.0), libva1, libvorbis0a (>= 1.1.2), libvorbisenc2 (>= 1.1.2), libvpx0 (>= 0.9.0), libx264-120, libxvidcore4 (>= 1.2.2), zlib1g (>= 1:1.2.0) Filename: ./libav/libavcodec53_0.8-2~bpo60+1_i386.deb Size: 5942474 MD5sum: a27925c5d996d7c1956226a906dbfaf2 SHA1: 0c6cff8cda234a83832e99f63101dd71969eda22 SHA256: 9489147b31b2343e4790465044dbe0590a511c71aba120982d999786960d2228 Description: Libav codec library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the codec library from Libav (both encoding and decoding). . It supports most existing codecs (MPEG, MPEG2, MPEG4, AC3, DV...). Homepage: http://libav.org/ Package: libavdevice53 Priority: optional Section: libs Installed-Size: 232 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libasound2 (>> 1.0.18), libavcodec53 (>= 4:0.8-2~bpo60+1) | libavcodec-extra-53 (>= 4:0.8), libavcodec53 (<< 4:0.8-99) | libavcodec-extra-53 (<< 4:0.8.99), libavformat53 (>= 4:0.8-2~bpo60+1) | libavformat-extra-53 (>= 4:0.8), libavformat53 (<< 4:0.8-99) | libavformat-extra-53 (<< 4:0.8.99), libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.7), libdc1394-22, libjack-jackd2-0 (>= 1.9.5~dfsg-14) | libjack-0.116, libx11-6, libxext6, libxfixes3 (>= 1:4.0.1) Filename: ./libav/libavdevice53_0.8-2~bpo60+1_i386.deb Size: 91262 MD5sum: d1f453c154c3ec7a62e01a3c95613fe2 SHA1: 219eccc272a1b8cf3a3a595951e82ea0f2cce6b2 SHA256: 73546e75a9b35d7048241bc3312f7114204b76c40c12e854382896a0efe9c125 Description: Libav device handling library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the device handling library from Libav. Homepage: http://libav.org/ Package: libavformat53 Priority: optional Section: libs Installed-Size: 2228 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavcodec53 (>= 4:0.8-2~bpo60+1) | libavcodec-extra-53 (>= 4:0.8), libavcodec53 (<< 4:0.8-99) | libavcodec-extra-53 (<< 4:0.8.99), libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libbz2-1.0, libc6 (>= 2.7), librtmp0 (>= 2.3), zlib1g (>= 1:1.1.4) Filename: ./libav/libavformat53_0.8-2~bpo60+1_i386.deb Size: 1026570 MD5sum: 911940bcff24e6609e5cec0f37011f2d SHA1: 13c1ad26a54caf98627b388bcfb8bb47a6db9a7d SHA256: c3f287f2083670ab5661436d2f33a0c8f28c97dd276e71ab2890c6e0e6bc60b4 Description: Libav file format library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the library for handling file formats from Libav. . It supports most existing file formats (AVI, MPEG, OGG, Matroska, ASF...). Homepage: http://libav.org/ Package: libavfilter2 Priority: optional Section: libs Installed-Size: 448 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavcodec53 (>= 4:0.8-2~bpo60+1) | libavcodec-extra-53 (>= 4:0.8), libavcodec53 (<< 4:0.8-99) | libavcodec-extra-53 (<< 4:0.8.99), libavformat53 (>= 4:0.8-2~bpo60+1) | libavformat-extra-53 (>= 4:0.8), libavformat53 (<< 4:0.8-99) | libavformat-extra-53 (<< 4:0.8.99), libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.7), libfreetype6 (>= 2.2.1), libswscale2 (>= 4:0.8-2~bpo60+1) | libswscale-extra-2 (>= 4:0.8), libswscale2 (<< 4:0.8-99) | libswscale-extra-2 (<< 4:0.8.99) Filename: ./libav/libavfilter2_0.8-2~bpo60+1_i386.deb Size: 180820 MD5sum: 6a2647763b933360d1a0a8cdae6c4159 SHA1: 9a4def672c798ff1a671dd77c55f9258dc6af573 SHA256: 1f7734d389e43fbc68e79685f4db26501167e86d095d85d97d0617e7cfb98200 Description: Libav video filtering library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video filtering library from Libav. Homepage: http://libav.org/ Package: libpostproc52 Priority: optional Section: libs Installed-Size: 588 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.3.6-6~) Filename: ./libav/libpostproc52_0.8-2~bpo60+1_i386.deb Size: 192426 MD5sum: 4391cd4584ab14846a2d934c9d95530f SHA1: 51c91f8a9ebebb18adea340aa73cb27618ef9b67 SHA256: 6856d6391823c5c49628d4d4f02525a547ed3b57d352f9c6bf48f9abcbf22a96 Description: Libav video postprocessing library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video postprocessing library from Libav. Homepage: http://libav.org/ Package: libswscale2 Priority: optional Section: libs Installed-Size: 696 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8), libavutil51 (<< 4:0.8-99) | libavutil-extra-51 (<< 4:0.8.99), libc6 (>= 2.3.6-6~) Filename: ./libav/libswscale2_0.8-2~bpo60+1_i386.deb Size: 225590 MD5sum: a43cae47c5b5e18b7ce0d15e8bd7e75b SHA1: eddb7b7801f9fecd525e2f305b4a742682bbca98 SHA256: 403af3b0aeac3472101f118dfef616656a7ae6dc60cd03733ba1941f712b13a9 Description: Libav video scaling library Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video software scaling library from Libav. Homepage: http://libav.org/ Package: libavutil-dev Priority: optional Section: libdevel Installed-Size: 488 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil51 (<= 4:0.8-99) | libavutil-extra-51 (<= 4:0.8.99), libavutil51 (>= 4:0.8-2~bpo60+1) | libavutil-extra-51 (>= 4:0.8) Filename: ./libav/libavutil-dev_0.8-2~bpo60+1_i386.deb Size: 142830 MD5sum: 8c8871776e049f899f219aaa4b375d06 SHA1: af999b322482244f00d55a2ddd614f4a2543dbe7 SHA256: 5a53286eb387e10a282beddb9f33e476f5af48b4ef5511c626edc270de25aadf Description: Development files for libavutil Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the common utility library from Libav. . This package contains the header files and static libraries needed to compile applications or shared objects that use libavutil. Homepage: http://libav.org/ Package: libavcodec-dev Priority: optional Section: libdevel Installed-Size: 9064 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavcodec53 (<= 4:0.8-99) | libavcodec-extra-53 (<= 4:0.8.99), libavcodec53 (>= 4:0.8-2~bpo60+1) | libavcodec-extra-53 (>= 4:0.8), libavutil-dev (= 4:0.8-2~bpo60+1) Suggests: libfaad-dev, libgsm1-dev, libogg-dev, libschroedinger-dev, libspeex-dev, libtheora-dev (>> 0.0.0.alpha4), libvorbis-dev, libx11-dev, libxext-dev, zlib1g-dev, libraw1394-dev, libdc1394-22-dev Filename: ./libav/libavcodec-dev_0.8-2~bpo60+1_i386.deb Size: 3430034 MD5sum: 5cc5e964aa580d1a3e1c6d1019ae0d90 SHA1: cab85ff332b5c0c17fcf4bc199b78176c44f22ac SHA256: cdba0f324be9cf3633a2380cefb1a83e013db09f0477b8eb213d6fd3b5fca8cd Description: Development files for libavcodec Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the codec library from Libav. It supports most existing encoding formats (MPEG, DivX, MPEG4, AC3, DV...). . This package contains the header files and static libraries needed to compile applications or shared objects that use libavcodec. Homepage: http://libav.org/ Package: libavdevice-dev Priority: optional Section: libdevel Installed-Size: 180 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavdevice53 (<= 4:0.8-99) | libavdevice-extra-53 (<= 4:0.8.99), libavdevice53 (>= 4:0.8-2~bpo60+1) | libavdevice-extra-53 (>= 4:0.8), libavformat-dev (= 4:0.8-2~bpo60+1) Filename: ./libav/libavdevice-dev_0.8-2~bpo60+1_i386.deb Size: 68588 MD5sum: 256cb7483e3262215e6bb3fadad3dbad SHA1: c140cfec978e98a68c2378694441ac444c97c0c1 SHA256: 29239a913fd772f797a988f388c659f7da0e3fee0146e5592a807fa0e212018a Description: Development files for libavdevice Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the device handling library from Libav. . This package contains the header files and static libraries needed to compile applications or shared objects that use libavdevice. Homepage: http://libav.org/ Package: libavformat-dev Priority: optional Section: libdevel Installed-Size: 1744 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavcodec-dev (= 4:0.8-2~bpo60+1), libavformat53 (<= 4:0.8-99) | libavformat-extra-53 (<= 4:0.8.99), libavformat53 (>= 4:0.8-2~bpo60+1) | libavformat-extra-53 (>= 4:0.8), libavutil-dev (= 4:0.8-2~bpo60+1) Filename: ./libav/libavformat-dev_0.8-2~bpo60+1_i386.deb Size: 675878 MD5sum: 4e4b3942a6931d44c99e04b27359d52c SHA1: 910b7714f8382f9439dc1e7f3987c4b46621e109 SHA256: bed7935df8bdf616afa060d63ccaf2c22d6133aa33662e3a5120d5f909fe878d Description: Development files for libavformat Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the demuxer library from Libav. It supports most existing file formats (AVI, MPEG, OGG, Matroska, ASF...). . This package contains the header files and static libraries needed to compile applications or shared objects that use libavformat. Homepage: http://libav.org/ Package: libavfilter-dev Priority: optional Section: libdevel Installed-Size: 404 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavcodec-dev (= 4:0.8-2~bpo60+1), libavfilter2 (<= 4:0.8-99) | libavfilter-extra-2 (<= 4:0.8.99), libavfilter2 (>= 4:0.8-2~bpo60+1) | libavfilter-extra-2 (>= 4:0.8) Filename: ./libav/libavfilter-dev_0.8-2~bpo60+1_i386.deb Size: 138146 MD5sum: 60e9942af5d765bba74a343307fe2455 SHA1: f82d470ab888c5b26e5bc3dcb6c3a1daea18dbf5 SHA256: 9c5ace82aaf2dc3733cce1089a2f8ea61cbc633917c8e6dc47e34d52da5ceaff Description: Development files for libavfilter Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video filtering library from Libav. . This package contains the header files and static libraries needed to compile applications or shared objects that use libavfilter. Homepage: http://libav.org/ Package: libpostproc-dev Priority: optional Section: libdevel Installed-Size: 340 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil-dev (= 4:0.8-2~bpo60+1), libpostproc52 (<= 4:0.8-99) | libpostproc-extra-52 (<= 4:0.8.99), libpostproc52 (>= 4:0.8-2~bpo60+1) | libpostproc-extra-52 (>= 4:0.8) Filename: ./libav/libpostproc-dev_0.8-2~bpo60+1_i386.deb Size: 116216 MD5sum: 5f57125afd70d9cdf524cb71910f6039 SHA1: a5e25b9a319d3c9b8f087dabde6bac0596904922 SHA256: f9ea166677b0f02f4ed3887d8980fd7530a22ffa4b9e7f3d50dc748ae43ae029 Description: Development files for libpostproc Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video postprocessing library from Libav. . This package contains the header files and static libraries needed to compile applications or shared objects that use libpostproc. Homepage: http://libav.org/ Package: libswscale-dev Priority: optional Section: libdevel Installed-Size: 460 Maintainer: Debian Multimedia Maintainers Architecture: i386 Source: libav Version: 4:0.8-2~bpo60+1 Depends: libavutil-dev (= 4:0.8-2~bpo60+1), libswscale2 (<= 4:0.8-99) | libswscale-extra-2 (<= 4:0.8.99), libswscale2 (>= 4:0.8-2~bpo60+1) | libswscale-extra-2 (>= 4:0.8) Filename: ./libav/libswscale-dev_0.8-2~bpo60+1_i386.deb Size: 151540 MD5sum: 7a085fe410cf79036860b370b672bd95 SHA1: 10fefaf2e5a0871d27b8b4956a9c6373b69bffc0 SHA256: 2c9701f49151d7dfe4bcfeb344f3aebf9bf6c593342fdb1fda57e8657033b493 Description: Development files for libswscale Libav is a complete, cross-platform solution to decode, encode, record, convert and stream audio and video. . This is the video scaling library from Libav. . This package contains the header files and static libraries needed to compile applications or shared objects that use libswscale. Homepage: http://libav.org/